DIGIT-ARC read-only archive · snapshot: July 23, 2026

2 gB Usable out of 4 gb,can this be the reason of system slowing down"

24 posts · originally from https://geek.digit.in/community/threads/2-gb-usable-out-of-4-gb-can-this-be-the-reason-of-system-slowing-down.168534/

theserpent
theserpent Original post #1
Jan 6, 2013 at 12:12 PM
Hey there
So from the past few days my computer has become slow.
I deleted some malware via malware byte.
Secondly,gta 4 had also become veryy laggy and sometimes it takes lots of time to even open task manger
Today i checked the ram and it shows 4GB(2GB USABLE)

*i49.tinypic.com/2h7e78x.jpg
krishnandu.sarkar
Jan 6, 2013 at 12:19 PM
Nope. I guess, the rest of the memory is being used for Graphics Memory.

Not sure, lets see what others have to say.
theserpent
Jan 6, 2013 at 12:20 PM
graphics memory? But i already have a gfx card
coderunknown
Jan 6, 2013 at 2:31 PM
igfx may be enabled even if you have discrete GPU. PEG is given more priority so maybe igfx is ignored despite being it on.
theserpent
Jan 6, 2013 at 3:48 PM
Leave that now I went to clean the components and now the computer doesn't turn on
ganeshnokiae63
Jan 6, 2013 at 5:13 PM
1)check any loose connections
2)did you hear any beep sounds?
3)how you clean the computer?
sukesh1090
Jan 6, 2013 at 7:58 PM
@theserpent,
do you know how to disassemble and reassemble a system?:wink:
if yes then do it.because it is very difficult to suggest any thing without clear details.here in this case the culprit could be anything.so its better to reassemble the rig from scratch.
topgear
topgear #8
Jan 7, 2013 at 4:09 AM
may be some issue with the mobos cpu socket pin.
theserpent
Jan 7, 2013 at 3:02 PM
I don't know how to assemble.
I had removed the gpu cleaned the fan with a soft brush.
Inserted the Gpu back,when i turn the chasis on...the CPU fan turns,and the fan turnin sound also can be heard
The monitor shows no signal(It always shows it before the computer turns on) tommorow th Computer wala will come and check it out
Skud
Skud #10
Jan 7, 2013 at 3:21 PM
Is the GPU working properly, like the fan spinning or not?
theserpent
Jan 7, 2013 at 3:23 PM
^ GPU is fine....I removed the gpu and also tried(by connecting display adapter to mobo) still doesn't work, i even removed The CMOS for 10 mins and inserted back still no use
ganeshnokiae63
Jan 7, 2013 at 3:49 PM
check any screws stuck with the mobo
M
Jan 7, 2013 at 4:24 PM
does the cpu doesn't turn on???
or no display ???
rhitwick
rhitwick #15
Jan 7, 2013 at 4:47 PM
Remove RAM sticks-->Clean-->Put again

Change slots this time.

I guess your GFX card requires extra power, did you remember to connect the 4/6 pin connectors?
theserpent
Jan 7, 2013 at 6:08 PM
^ My gfx card doesnt need a connector
Skud
Skud #17
Jan 7, 2013 at 6:36 PM
Disconnect everything from USB ports, except KB & Mouse and try booting. I was facing a similar problem, and that works. Even cleaning/changing RAM sticks didn't help.
theserpent
Jan 7, 2013 at 7:48 PM
Re: 2 gB Usable out of 4 gb,can this be the reason of system slowing down"

Disconnect everything from USB ports, except KB & Mouse and try booting. I was facing a similar problem, and that works. Even cleaning/changing RAM sticks didn't help.

But only kb&mouse is connected to USB

thanks to everyone who said remove ram it works now
Skud
Skud #19
Jan 7, 2013 at 8:03 PM
So, even the RAM problem is solved?
sukesh1090
Jan 7, 2013 at 9:29 PM
^^
congrats then.even i faced that no signal problem but clearing CMOS helped me.so its a random problem and always has random fix.
R
rajnusker #22
Jan 7, 2013 at 10:57 PM
I don't know how to assemble.
I had removed the gpu cleaned the fan with a soft brush.
Inserted the Gpu back,when i turn the chasis on...the CPU fan turns,and the fan turnin sound also can be heard
The monitor shows no signal(It always shows it before the computer turns on) tommorow th Computer wala will come and check it out

Take out the card. Try the using the inbuilt graphics.
topgear
topgear #23
Jan 8, 2013 at 4:20 AM
^^ buddy check the above 4 posts ;-) Op's issue has been solved.
sukesh1090
Jan 8, 2013 at 8:54 PM
^^
better close this thread bro. :)