i am now trying a Zotac 560Ti(non-amp) 1GB card.
it shows ".. kernel mode driver stopped responding and has successfully recovered "
system freezes or gives BSOD
after searching in google it seems that it is a driver issue or win 7 compatibility issue.
Does any one have any solution to this, please share
^^Which driver version you are using??Its shows this problem when playing any games??Have you updated the Windows 7??
Un-install your current display driver - use driver Sweeper to remove any last remnants of the driver - download and install the latest version of display driver.
i was using 280.26
@Tenida i was not playing games , working on eclipse & browsing.
whoa! now no display is coming from the gfx card. Is the card dead or do i have a bad PCix 16 slot?
is there any software to know if PCIx16 working or not?
Check the card on some other computer to sure which one is faulty.Or check some other gfx card on your motherboard.
But before doing reset your cmos.
is the pc working and gpu not giving display? try with onboard gpu.
most probably the gpu gone kaput - send it for RMA but before that make sure about this though. Also clean the pci-e x16 slot and the card and put it once more and see what happens.
tried but no display.
i think newer BIOS of my mobo has some problem. because i have tried three cards all were working fine before putting into my PC. After running in my PC after some time(15min or so) no display.
I think these(ver:2501,2701)bios are corrupting the cards.
Is that possible?
XFX 9600GT,SAPPHIRE 6950,ZOTAC 560Ti
for the 9600GT i can assure you guys that it works fine as i was using since 3years.Rest of these cards are brand new.
the onboard HD3200 is working flawlessly though.
after running 15 mins on your mobo those cards gone bad ???? or they are working fine on other rigs ???
Make sure that pci-e link frequency is set to 100Mhz in bios and the power connectors ( specially the 24 pin and gfx card plugs ) from the PSU is all ok - if possible try another psu.
after running on my rig the cards gone bad
^^ check earthing and psu part of my previous post.
@Jaskanwar Singh PC is working properly on onboard HD3200
earthing is proper IMO. PSU is TX850
^^ fine - have you checked the psus pci-e 6/8 pin connectors ? To be sure test your rig with another psu. But if psus are fine then the mobos pci-e slot got screwed somehow.
TP i think 9600GT doesnt reqire connectors. So psu fine i supose.
I would recheck the wiring, earthing and the socket if I were you. The least you can do is cut the existing wiring joints at the back of the socket and put a new one. I assume you are using a surge protector as well?
Remove the system out of the case and then try booting with the GPU. This might help to narrow it down.
My XFX 9600GT has one 6-pin PCIx power connector
