DIGIT-ARC read-only archive · snapshot: July 23, 2026

80 gb hard disk corrupt....please help!!!

15 posts · originally from https://geek.digit.in/community/threads/80-gb-hard-disk-corrupt-please-help.168623/

R
RAM93 Original post #1
Jan 7, 2013 at 9:06 PM
i was installing windows 7 on my pc...i wanted to do partion...and was not knowing anything about windows 7... so i ejected the disk.. and inserted the xp disk to do partion...but then i thought of not doing partion..so i ejected the xp disk and inserted the 7 disk again...and i dint completed the installation and shuted down the system... then after some time when i switched it on..it was showing...no boot disk,insert boot disk and press any key(doesnt remember the exact sentance)...
so i want to know, is my hard disk corrupt?? and how to correct it... i am not concerned about the hard disk...i only want my data......

hard disk is...Samsung HD080HJ (80GB/7200rpm/8M)

please HELP!!!!!!!
doomgiver
Jan 8, 2013 at 2:04 AM
DONOT TOUCH THE HARD DRIVE.
DONOT BOOT TO THE HARD DRIVE.
DONOT USE IT AT ALL.

your data is (for the most part) safe right now.

tell us more about the hard disk.
what OS you were using. what was the original partition scheme you were using (eg, C: D: E: or C: D: G: H:, etc)

please dont use that disk for anything, as any sort of usage (including trying to install software/os) can result in destruction of data.

i'd advise you to get an external or 2nd hard disk, and arrange for a live CD of a linux distro (like ubuntu). this will ensure that the disk is not used till the data has been safely copied.
Cilus
Cilus #3
Jan 8, 2013 at 12:17 PM
Buddy, I don't think your HDD is corrupted. As you have ejected the OS disk before the complete installation, the Bootloader is not able to find the required files required to boot into Windows and showing the error message. Better, re install the OS in your C drive. Make sure you format the Dir vie (mainly C) where you are going to install the OS. If going with Win 7, make sure you have at least 20GB on the disk.
R
RAM93 #4
Jan 8, 2013 at 5:26 PM
@doomgiver....partion was c,d,e & f...and i was using xp...i tried using ubuntu..but it was showing only one drive,which is not imp for me..my main data is in other drives... and what more details u want about HDD
@cilus...i tried reinstalling also...but it was not responding.(i dont remember the errors)....

actually this whole trajedy happened 6 months before:-(...
doomgiver
Jan 8, 2013 at 7:32 PM
what?!?!

6 months
._________.

ok, did you have important data on C: drive?
or did C: drive have just windows install data?

i hope your "important" data was in D,E and F drives.

which drive is ubuntu showing?
try this command :

sudo fdisk -l

^^ thats SMALL '-L' like '-l'

post the result here.
R
RAM93 #6
Jan 8, 2013 at 8:02 PM
no...no imp data on c.... its only showing d drive....
when and where to use that cmd??
Zangetsu
Jan 8, 2013 at 9:01 PM
use BART PE Bootable XP to backup the data
d6bmg
d6bmg #8
Jan 9, 2013 at 12:13 AM
Nothing happened, perform a clean installation of any OS you like in that drive.
doomgiver
Jan 9, 2013 at 1:54 AM
no...no imp data on c.... its only showing d drive....
when and where to use that cmd??
in linux command line (the application is called "terminal" or xterm.

use BART PE Bootable XP to backup the data

linux is far easier to setup than any winPE BS
Zangetsu
Zangetsu #10
Jan 9, 2013 at 12:59 PM
linux is far easier to setup than any winPE BS

its not about easy or tough...once u have the bootable version no need for any hassles...
burn the bootable CD and make use of it always like I do with BartPE
R
RAM93 #11
Jan 9, 2013 at 5:41 PM
what?!?!

6 months
._________.

ok, did you have important data on C: drive?
or did C: drive have just windows install data?

i hope your "important" data was in D,E and F drives.

which drive is ubuntu showing?
try this command :

sudo fdisk -l

^^ thats SMALL '-L' like '-l'

post the result here.

ubuntu@ubuntu:~$ sudo fdisk -l
Warning: ignoring extra data in partition table 6
Warning: ignoring extra data in partition table 6
Warning: ignoring extra data in partition table 6
Warning: invalid flag 0xaf0e of partition table 6 will be corrected by w(rite)

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf30df30d

Device Boot Start End Blocks Id System
/dev/sda1 2551 3825 10241406 7 HPFS/NTFS
/dev/sda2 2551 4462 15358140 5 Extended
/dev/sda5 2551 3825 10241406 7 HPFS/NTFS
/dev/sda6 ? 262321 306786 357171112+ be Solaris boot

Partition table entries are not in disk order
doomgiver
doomgiver #12
Jan 9, 2013 at 9:48 PM
ok, i think linux can see all your partitions.

there was a method to restore a corrupted mbr from linux, i think you'll need to do that. google around and check.
R
RAM93 #13
Jan 10, 2013 at 5:53 PM
ok, i think linux can see all your partitions.

there was a method to restore a corrupted mbr from linux, i think you'll need to do that. google around and check.

what and how to do?
doomgiver
doomgiver #14
Jan 10, 2013 at 9:46 PM
i cant tell you without googling myself :)
i have 2 more days of exams, so wont be able to help till then.

but you can always google for it. no harm.
R
RAM93 #15
Jan 20, 2013 at 3:14 PM
i cant tell you without googling myself :)
i have 2 more days of exams, so wont be able to help till then.

but you can always google for it. no harm.

so if your exams are over...could u please tell me.. how to do it and will my data be safe as i only want my data...