DIGIT-ARC read-only archive · snapshot: July 23, 2026

Airtel Boardband Connection been interrupted Again & Again.

13 posts · originally from https://geek.digit.in/community/threads/airtel-boardband-connection-been-interrupted-again-again.174098/

Knight2A4
Knight2A4 Original post #1
May 23, 2013 at 10:02 AM
Hello Guy's

I have a 512 kbs broadband plan from airtel. but am facing a very serious issue related to the connection. The broadband connection get interrupted again & again. I have call airtel many many time but they only send lineman who checks the line & tell's that the connection is working fine. To make my case stronger i need to know how can i check for interrupted connection in b/w two intervals i mean how many time the connection have broke in b/w 20/may/2013 to 23/may/2013. i know there is a way to see that b/c i have seen network engineers do that. Please help me out. every advice is valuable


Thanks.
W
May 23, 2013 at 12:17 PM
first of all go to your modem settings page(192.168.1.1 in browser & use admin as username & password).in device info/status page check that both snr values are above 15 & both attn values are below 50.
Knight2A4
May 24, 2013 at 3:47 AM
Thanks for your reply Whitestar_999

My modem is Beetel 220BX1 . I was unable to find the setting you mentioned ...... To help with am uploading a snap
Capture.JPG
W
May 24, 2013 at 12:48 PM
under device info see statistics.
Knight2A4
May 24, 2013 at 2:02 PM
Thanks for the help here i am uploading the snap .........

Capture3.JPG
Saahib
Saahib #6
May 24, 2013 at 2:32 PM
hmm.. its generally in Summary page.. you may other locations and just look for SNR margin and Attenuation . Just to add here, you hardly get any SNR / attenuation issue in Airtel as they have good lines, but still verify it.
W
May 24, 2013 at 4:00 PM
those statistics are for LAN.check statistics for every entry & see if you can find snr & attn values.also check summary page too.
Knight2A4
May 24, 2013 at 8:34 PM
Here i think i have found it .......

Capture 5.JPG

Downstream Upstream
SNR Margin (dB): 21.0 8.0
Attenuation (dB): 18.0 16.0
W
May 24, 2013 at 9:04 PM
just as i thought.your upstream snr is very low.it should be 15 or above.maybe some connection is loose.try disconnecting & reconnecting phone line into splitter(this time with a little bit more force than usual) & between splitter & modem.
B
BhargavJ #10
May 25, 2013 at 4:30 PM
I am facing a similar disconnection problem; here's a screen of my modem:

Modem.jpg

The attenuation is not below 50. What should I do?
W
May 25, 2013 at 5:56 PM
these values are for normal ADSL connections.you seems to be using xDSL(reliance i guess).
B
BhargavJ #12
May 25, 2013 at 7:55 PM
My broadband connection is from BSNL. Are the values alright?
W
Jun 2, 2013 at 9:52 AM
i missed your reply somehow.anyway your modem is showing values in a different scale(0.1dBm) which i have not seen before but according to my guess your values are alright assuming your connection is working normally.