O
anybody using this mobo?? have you tried oc'ing it??
any asus a8 nvm users??
I personally don't have this mobo... But, its not hard to o/c it... Why ? Are you facing any problems oc-ing it ?
O
no ... but i cant inc fsb beyonf 240... thats the limit in the bios... .now its set to 240.....stock is 9*200=1800 nd now its 2167...acc to cpu z... also changd ram to 2.5-3-3-7 from 3-4-4-8... can i push it furter on stock cooling??? temp doest go beyond 40c
Umm.. I don't think you should, even if you can.... I assure you, thats a very decent o/c... Anything higher will reduce the life of your board/CPU remarkably...
Anyhow, if you still want to o/c ... get SoftFSB ....
Anyhow, if you still want to o/c ... get SoftFSB ....
I'm an A8N VM user with an Athlon 3000+
I once tried to overclock it and it went upto 2 ghz.
I once tried to overclock it and it went upto 2 ghz.
O
okkk ... i wont try much then.. thanks
Omsck said:
wat temps ur havin @ stock and @ 2167MHz??
if temps r within limit then u can easily oc beyond 2167.but dont inc ur vCore much in order to inc fsb.
just keep a tab on ur temps and the vcore.
O
@ 2167 temp is 35c ....wat r the temp limits?? . nd tell me one thing, as i inc the fsb, the ram freq also inc... what is the limit upto which the ram can can handle?? do i need to use the divider for mem clock??
yes use the divider to first underclck ur ram and then oc it.
just oc to 2.4 and post ur idle and full load temps
just oc to 2.4 and post ur idle and full load temps
hey... i hav A8V-MX mobo with Athlon 3000+ running at 1.8GHz should i o/c so it increases performance of my system?????
will it help in gamin or anyother other stuff???? and someone mentioned tat if we o/c then life of the processor & mobo reduces it this true??
will it help in gamin or anyother other stuff???? and someone mentioned tat if we o/c then life of the processor & mobo reduces it this true??
O
but here is a prob; how do i undrclk the ram?? there is no optin in bios...
Why does he need to underclock his RAM ??
O
@assasin, i limited ram to 166; fsb is now 266.8; 9*266.8=2401 .... ram@ 240... while writing these temp is 35... what should to acieve full load?? nd how much should the ram run at ideally??
Run a few heavy duty games..... Anything heavy that you got.. Run them for about 20-25 minutes....Your system should peak at its full load.....
@kaustav_geek
wat abut my query???? should i overlock... read my post on top
wat abut my query???? should i overlock... read my post on top
Yes, o/c-ing will help you in gaming... But make sure that your system stays cool and stable... Else, you system life will reduce.. O/c fanatics will deny, but even o/c-ing within limits decreases system life.....
Ask, assasin for a detailed How-to o/c-ing...
kaustav_geek said:
thanks a lot
kaustav_geek said:
oc ing ram is only good upto a certain xtent since it doesnt hav any sort of cooling and u cant get any info bout heat build up.so for normal ram its better not to oc too much.
since ram speen incs if u inc fsb,in order to achieve a high fsb after oc its better to underclock ur ram 1st so that the xtent of oc on ram decreases.
for a better under standing see my rig's config in my sig:
Default Speeds :
E4300 = 9.0*200MHz = 1800MHz
Ram = 667MHz
since to hit the 3GHz mark i had to raise the fsb to 333 from 200,the ram inc from 667 to 833.in order to dec the ram speed from 833 and to achieve 1:1 ratio i just underclocked the ram to 533 and then inc'd mobo fsb.
the result:
E4300 = 9.0*333 = 3GHz
ram = 667MHz