PLease, PLEASE, PLEEEEEEEEEEAAAAAAAAAAAAAASSSSSSSSSSSSE Reply.
Any One who uses a netgear modem to connect to dataone?
All DSl modem have almost same configuration process.
You can have a simple guide here:
*www.techhunt.org/node/52
You can have a simple guide here:
*www.techhunt.org/node/52
I use a Netgear dm111p Modem to connect to DataOne.
If you had been given a CD, then avoid using it as it takes time......
To configure your modem, open you Web Browser and enter 192.168.0.1 and Username: admin, Password: password
Click on ADSL settings and enter the information as given below:
*img248.imageshack.us/img248/9881/dm111pconfigyr0.jpg
Note: Don't forget to enter your DataOne Username & Password.......
If you had been given a CD, then avoid using it as it takes time......
To configure your modem, open you Web Browser and enter 192.168.0.1 and Username: admin, Password: password
Click on ADSL settings and enter the information as given below:
*img248.imageshack.us/img248/9881/dm111pconfigyr0.jpg
Note: Don't forget to enter your DataOne Username & Password.......
@DizitalNovie
I just received your PM and wanted to know you modem's model number....Is it dm111p ??
If yes, you need to upgrade your Firmware to get it working in Vista. This is what I have done. The latest firmware 3.30j for dm111p is available here: ftp://downloads.netgear.com/files/dm111p_ww_3_30j.zip.
Extract the ZIP file and perform a Firmware upgrade. You'll get the option of Firmware Upgrade in *192.168.0.1.
I just received your PM and wanted to know you modem's model number....Is it dm111p ??
If yes, you need to upgrade your Firmware to get it working in Vista. This is what I have done. The latest firmware 3.30j for dm111p is available here: ftp://downloads.netgear.com/files/dm111p_ww_3_30j.zip.
Extract the ZIP file and perform a Firmware upgrade. You'll get the option of Firmware Upgrade in *192.168.0.1.
Problem solved. Thankyou!
You're welcome......
