[App] Viper4android [Easy Guide]

Most people do know about Viper4Android and some even use it while most dont bother coz of the complex nature. This guide is for them. Earlier i used ES18, Pistons 2 and was using a Rs.90 Ubon earphone *copypastas.com/images/Emoticons/4head.png after my P2 went kaput. I'm no way an audiophile and don't like spending too much on earphones coz i break them often. So i bought a ES18S recently and was kinda disappointed with it. Something was missing. So i decided to install Viper4android on my Oneplus One. And the improvement WAS WAY OFF THE ROOF. My earphones became Godlike.

<Proceed at ur own risk.And you do need a rooted device.>

Download Links:
1. Viper4Android: Here || Credits

2. SELinuxModeChanger: Here || Credits
<This is optional. If u can set ur SElinux via Developers Mode then do so. Potential security risk.>

3. Busybox: Here || Optional

Setting Up:
Install Viper4Android.
Set the UI to expert.
Intall the drivers > Super Audio Quality or Battery Saver (If u have low end device)
Reboot the device.
Check in Driver Status. <Enabled:Yes>
If Enabled: No, then install the SELinuxChanger and set to Permissive.
If still No, then install busybox.
If still No, God help You or use Google search.

Configuring Viper4Android:
This is where most people back out and uninstall after failing to configure or too lazy to find IRS files. Now most people have different audio preferences but most of us want a clear sound with impactful bass. Bass shouldn't be overpowering. So I'm sharing the config here. Its a lil modified one from the one here. There are lots of IRS files, im sharing the one i used. If u find anything better then share please.

1. MASTER POWER: √
(ii) Force Enable V4A: Unchecked
2. PLAYBACK CONTROL GAIN: √
(ii) Select Effect Strength: Moderate
(iii) Max Gain: 4x
(iv) Max Output: o
3. VIPER-DDC: <Enable if ur IEM is listed>
(ii) Listening Device:
4. SPECTRUM EXTENSION: √
(ii) Strength: 0.5
5. FIREQUALIZER:
(ii) Select Preset:
6. CONVOLVER: √
(ii) Impulse Response: Dolby Headphone.irs
(iii) Cross Chanel 5 Percent
7. FIELD SURROUND: √
(i) Select Field Surround Strength: Moderate
(ii) Select Mid Image Strength: Extreme
8. DIFFERENTIAL SURROUND: √
(i) Select Delay Time: 14 ms
9. HEADPHONE SURROUND +: √
(i) Select Effect Quality: Level 2
10. REVERBERATION: √
(i) Room Size: 49m2
(ii) Sound Field: 10m
(iii) Damping Factor: 80 Percent
(iv) Wet Signal: 20 Percent
(v) Dry Signal: 60 Percent
11. DYNAMIC SYSTEM: √
(i) Select Listening Device: Unknown Type IV
(ii) Select Dynamic Bass: 16 Percent
12. TUBE SIMULATOR (6N1J):
13. FIDELITY CONTROL:
(i) Enable ViPER Bass: √
Select Bass Mode: Natural Bass
Select Bass Frequency: 60 Hz
Select Bass Boost: 8.0 dB
(ii) Enable ViPER Clarity: √
Select Clarity Mode: Natural
Select Clarity: 10.0 dB
14. AUDITORY SYSTEM PROTECTION:
(ii) Select Binaural Level:
15. MASTER GATE (Limiter):
(i) Output Gain: 0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: 0 dB

Click to expand...

Now enjoy ur 50$ IEM. ᕙ( ^ₒ^ c) You do require an IEM which responds to the changes. It also uses alot of power on ur device, so no multitasking or simultaneous high CPU usage (gaming, camera). Doesnt really impact ur battery life. Do share the configs u liked. Peace.