DIGIT-ARC read-only archive · snapshot: July 23, 2026

Beep code reference for Asus M5A88M

5 posts · originally from https://geek.digit.in/community/threads/beep-code-reference-for-asus-m5a88m.177531/

C
coldpowered Original post #1
Sep 5, 2013 at 2:08 PM
When I press the power switch , firstly there are the usual 2 beeps (but I think its faster now)
then 8 beeps and then again 2 beeps. Everything stays on & there is power in motherboard
but the display is not receiving any signal, it stays idle.

The problem happened with the graphics card(Radeon HD 6770 XFX) then i disconnected its power.
Now it must be running on integrated graphics but the problem is still there.

System Specs:

Asus M5A88M
Phenom II x4 840
Cosair Cx 500v2
Corsair vengeance 4 GB
WD10EARX 1 TB
Radeon HD 6770 XFX
topgear
topgear #2
Sep 6, 2013 at 3:00 AM
this indicates problem with ram modules and display adapter. Remove the cmos battery from mobo and place it back again after 2-3 minutes, connect the VGA cable on the mobos vga port and try to start the pc - if it boots fine then check ram modules using metest86+ app.
C
Sep 15, 2013 at 11:58 AM
I removed the CMOS battery. It booted in with display working. Now i restarted and connected monitor to gfx cards vga port , it booted but but after 6-10 minutes same problem occured .

After a couple of days i removed CMOS battery again and have been using with mobos vga port ( gfx card is in the slot but i have disconnected its power) .
With onboard graphics it seems to run fine .
Does this mean graphics card is faulty . There is warranty left on the card.
Also will metest86+ check for error in VRAM of graphics card.
harshilsharma63
Sep 15, 2013 at 7:06 PM
I removed the CMOS battery. It booted in with display working. Now i restarted and connected monitor to gfx cards vga port , it booted but but after 6-10 minutes same problem occured .

After a couple of days i removed CMOS battery again and have been using with mobos vga port ( gfx card is in the slot but i have disconnected its power) .
With onboard graphics it seems to run fine .
Does this mean graphics card is faulty . There is warranty left on the card.
Also will metest86+ check for error in VRAM of graphics card.

> test your graphic card on some other desktop.

> No, memtest will not check VRAM. But still, run it to check the system ram.
topgear
topgear #5
Sep 16, 2013 at 5:04 AM
I removed the CMOS battery. It booted in with display working. Now i restarted and connected monitor to gfx cards vga port , it booted but but after 6-10 minutes same problem occured .

After a couple of days i removed CMOS battery again and have been using with mobos vga port ( gfx card is in the slot but i have disconnected its power) .
With onboard graphics it seems to run fine .
Does this mean graphics card is faulty . There is warranty left on the card.
Also will metest86+ check for error in VRAM of graphics card.

yes, just RMA it