DIGIT-ARC read-only archive · snapshot: July 23, 2026

bios password of Intel motherboard D945GCCR

5 posts · originally from https://geek.digit.in/community/threads/bios-password-of-intel-motherboard-d945gccr.79611/

R
Ramakrishnan Original post #1
Feb 3, 2008 at 9:52 PM
My friend has a PC with intel D945GCCR motherboard. His PC is infested with viruses. He asked my help and when I wanted to boot off XP cd and format the PC and Install XP, it couldn't boot as the boot sequence is not cd rom first. Therefore I wanted to change the setting but it is password protected.

How can we know the password? The original assembler who assembled the PC may not be available. When I referred to support on Intel site, there is something about changing the cap of jumpers on the motherboard. Since I am not that kind a technical person, is there any other way to retrieve the password? Is there any default password such as Admin or something like that? I have already tried "Admin", "Password" etc.

Can anyone of you help me on the above?
Pathik
Pathik #2
Feb 3, 2008 at 9:55 PM
Just reset the BIOS once using a jumper or remove the Cmos battery.
Choto Cheeta
Feb 3, 2008 at 10:04 PM
How can we know the password? The original assembler who assembled the PC may not be available.

not possible to recover the BIOS PW :(

Can anyone of you help me on the above?

One think which can be done is to reset the BIOS... there are 2 ways, via jumper or via bettery reset..

Jumper Settings

Locate this jumper as show in the bellow image !!!

*img504.imageshack.us/img504/8816/jumper1ec5.jpg

there are 3 pins, like * * * the pin would cover 1 and 2 pin which is the default config... - - * so take the pin out and put it as 2 and 3 cover like, * - - start the system :D the BIOS should revart back to the default shipping factory settings... !!! now power of the system and restore the jumper to default 1 and 2 cover settings :D start the system once again to do you work :D

next option removing the battery :D

locate the bettery as show in the picture :)

*img504.imageshack.us/img504/39/batteryyf2.jpg

remove it and then wait for 5 pins, plug it back to start the system :) it would be restored to the factory settings :)
R
Feb 3, 2008 at 10:30 PM
What an instantaneous answer. Thank you Choto Cheeta
V
Feb 3, 2008 at 10:34 PM
Remove the CMOS battery on the motherboard and put it back