DIGIT-ARC read-only archive · snapshot: July 23, 2026

Can I overclock my processor...??

40 posts · originally from https://geek.digit.in/community/threads/can-i-overclock-my-processor.152615/

koolent
koolent Original post #1
Feb 12, 2012 at 1:26 PM
Hi my processor is:

Intel Core 2 Duo E7400 @2.8 GHz Wolfdale

Technology : 45nm

And I need to overclock it.. I am upgrading mu PSU to 430W-500W..

Motherboard : MSI Boston
Cooler : Cooler Master
Cabinet : Stock (Compaq CQ3070IL)

What are the possibilities?
Jaskanwar Singh
Feb 12, 2012 at 8:02 PM
your mobo? cpu cooler? cabinet?
which psu you getting?
topgear
topgear #3
Feb 13, 2012 at 5:23 AM
OP has MS-7525 (BostonL) mobo but it's bios has no option for OCing AFAIK ;-)
M
Mr.V #5
Feb 22, 2012 at 3:17 PM
you may need to use a software for OC ing.But i think increasing the FSB will do the job.
koolent
koolent #6
Feb 22, 2012 at 3:24 PM
Well, Doing this for the first time.. How should I do it ? With which sftware? and what is the safe limit of the processing speed ?
M
Mr.V #7
Feb 22, 2012 at 3:28 PM
Well, Doing this for the first time.. How should I do it ? With which sftware? and what is the safe limit of the processing speed ?

SysTools should do good.
Go upto 3.0 (maximum 3.3 to be on safe side...) Qverclocking too much may result in instability.
koolent
koolent #8
Feb 22, 2012 at 3:31 PM
Ok.. 3.0 GHz Should draw how much power ?
doomgiver
Feb 22, 2012 at 7:43 PM
dont just go straight off to 3 ghz.
increase in small jumps of 10-20 Mhz
after each increase, run a cpu-intensive tasks, like prime or pi calculators for some time (20-30 min), and check if it runs fine or not.

koolent, which psu do you have???
koolent
koolent #10
Feb 22, 2012 at 9:34 PM
This is not easy to say bt currently 180W
M
Mr.V #11
Feb 22, 2012 at 9:36 PM
dont just go straight off to 3 ghz.
increase in small jumps of 10-20 Mhz
after each increase, run a cpu-intensive tasks, like prime or pi calculators for some time (20-30 min), and check if it runs fine or not.

koolent, which psu do you have???

He is changing to a 430W i guess...
koolent
koolent #12
Feb 22, 2012 at 10:14 PM
Yes I am changing or might be a Seasonic S II 500W
topgear
topgear #13
Feb 23, 2012 at 4:44 AM
^^ take a look at here ;-)
It worked.The Un happanable Happened
koolent
koolent #14
Feb 23, 2012 at 6:13 PM
But my motherboard.. Does it support overclocking ?

And which clock generator should I use?

Gee.. I overclocked It to A 3.5 GHz using my Air Conditioner for cooling.. :)
koolent
koolent #15
Feb 23, 2012 at 8:30 PM
Antivirus problem after Overclocking...

I overclocked my

Intel Core 2 Duo E7400 @ 2.8 GHz to 3.5 GHz Under Air Conditioned atmosphere and the computer was running like a supercomputer.. No overheating or anything..

The problem:

My antivirus (Avast 6) is not working now.. It was working before overclocking it..

Also, when I start my computer, I cannot run many .exe things. Once skype is loaded, then I can run everything fine..

Why is this happening ? How do I correct it ?
coderunknown
Feb 23, 2012 at 10:25 PM
^^ its not cause of overclocking. check for missing files using windows build in system check. or it can be cause of some virus that may have got downloaded while you were downloading the overclock tool.
koolent
koolent #17
Feb 23, 2012 at 10:26 PM
Got it working agn.. I just reinstalled it..
koolent
koolent #19
Feb 24, 2012 at 4:43 PM
This is also fixed.. It was just something I didn't knew..
doomgiver
doomgiver #20
Feb 24, 2012 at 6:43 PM
hehe. trust windows to behave oddly
koolent
koolent #21
Feb 24, 2012 at 8:07 PM
@doomgiver

Ya.. I overclocked my processor for the first time and this had happened to me.. Lolz.. I have overclocked it agn and it works like a dream..
doomgiver
doomgiver #22
Feb 25, 2012 at 7:07 PM
cool, man!
are you having any other problems? and do post a screenshot of cpuz too.
koolent
koolent #23
Feb 25, 2012 at 10:09 PM
Nope.. No problems..Going all right..
topgear
topgear #24
Feb 26, 2012 at 3:27 AM
You OCed the cpu on MS-7525 (BostonL) mobo you have ?? Using Bios or setfsb ??
koolent
koolent #25
Feb 26, 2012 at 8:35 AM
I did it wid Set FSB.

Sukesh sir told me that it might be because of software OCing that the computer is behaving odd...

Well, I am just 13. I didn't know that..

After that I wanted to go furthur, so I used Air Conditioned air through a pipe and sprayed that cool air onto the processor, the GFX Card and the PSU..

I took my CPU to 4.0 GHz with tempratures of abt 49 Degrees..
The temprature was maintained there..

I havn't OCed my 6770 yet but soon I Will..

Anybody with any idea how to ovrclock a HD 6770 ?
M
Mr.V #26
Feb 26, 2012 at 10:42 AM
.

Anybody with any idea how to ovrclock a HD 6770 ?

Gratz with that overclocking! :) :doublethumb:
(i too overclocked my old pentium 925 to 3.61 GHZ!!! :hyper: )
Use the sapphire trixx software.Be warned though,dont overclock your graphics much as you may be getting the BSoD very often:D
koolent
koolent #27
Feb 26, 2012 at 4:46 PM
I did it wid Set FSB.

Sukesh sir told me that it might be because of software OCing that the computer is behaving odd...

Well, I am just 13. I didn't know that..

After that I wanted to go furthur, so I used Air Conditioned air through a pipe and sprayed that cool air onto the processor, the GFX Card and the PSU..

I took my CPU to 4.0 GHz with tempratures of abt 49 Degrees..
The temprature was maintained there..

I havn't OCed my 6770 yet but soon I Will..

Anybody with any idea how to ovrclock a HD 6770 ?

Bt my processor is an Intel Core 2 Duo @ 2.8 GHz

Is it possible to unlock the overclocking options for this MOBO ? Even by crossflashing ? If yes then how ?
M
Mr.V #28
Feb 26, 2012 at 9:29 PM
Bt my processor is an Intel Core 2 Duo @ 2.8 GHz

Is it possible to unlock the overclocking options for this MOBO ? Even by crossflashing ? If yes then how ?

err... i dont think so.
playing with BIOS is not recommended! :duh:
koolent
koolent #29
Feb 26, 2012 at 11:36 PM
Ya I also think so.. BIOS is something really important.. :)
topgear
topgear #30
Feb 27, 2012 at 3:42 AM
I did it wid Set FSB.

Sukesh sir told me that it might be because of software OCing that the computer is behaving odd...

Well, I am just 13. I didn't know that..

After that I wanted to go furthur, so I used Air Conditioned air through a pipe and sprayed that cool air onto the processor, the GFX Card and the PSU..

I took my CPU to 4.0 GHz with tempratures of abt 49 Degrees..
The temprature was maintained there..

I havn't OCed my 6770 yet but soon I Will..

Anybody with any idea how to ovrclock a HD 6770 ?

well congrats for taking the cpu to 4 Ghz ! Can you post a cpu-z screenshot and do post it on the cpu OC list thread.

I used Air Conditioned air through a pipe and sprayed that cool air onto the processor, the GFX Card and the PSU..

^^ can you post a pic of the setup - want to have a look at it ;-)
koolent
koolent #31
Feb 27, 2012 at 2:43 PM
can you post a pic of the setup - want to have a look at it

I will..
topgear
topgear #32
Feb 28, 2012 at 3:12 AM
^^ also don't forget to post a cpu-z screen shot along with that ;-)
koolent
koolent #33
Mar 1, 2012 at 9:17 PM
Well, I am getting a new mobo and PSU in April itself.. So, I will post it afterwards, after the examinations im having.. Now !!
topgear
topgear #34
Mar 1, 2012 at 9:39 PM
You said you have oced the c2d to 4ghz - if you can post a cpuz screenshot of that
koolent
koolent #35
Mar 1, 2012 at 11:18 PM
I have Screenshoted it up bt how do I post it ?

I have tried the Manage Attachments button bt it says uploading failed.. what to do ?
coderunknown
Mar 1, 2012 at 11:22 PM
upload to any image sharing site and post the image link here.
koolent
koolent #37
Mar 1, 2012 at 11:33 PM
Ok so, here is the Screenshot.. Thanks Sam..

*i41.tinypic.com/20r4vlt.png

Whoo.. Cooling wass a mess.. ;). But successfully did it.. :mrgreen:
topgear
topgear #39
Mar 2, 2012 at 3:28 AM
Ok so, here is the Screenshot.. Thanks Sam..

*i41.tinypic.com/20r4vlt.png

Whoo.. Cooling wass a mess.. ;). But successfully did it.. :mrgreen:

Great OC uisng the SetFSB app considering the mobo you have ;-)
koolent
koolent #40
Mar 2, 2012 at 6:58 AM
hehe.. ;).. I am Upgrading the Mobo.. :) ;)