DIGIT-ARC read-only archive · snapshot: July 23, 2026

cannot start Remote Access Connection Manager

5 posts · originally from https://geek.digit.in/community/threads/cannot-start-remote-access-connection-manager.61766/

N
nikhil1243 Original post #1
Jun 30, 2007 at 2:56 PM
cannot start Remote Access Connection Manager
this is error coming
could not start cannot start Remote Access Connection Manager on local computer
Error 5: access is denied
ravi_9793
Jun 30, 2007 at 4:39 PM
wht version of windows Xp u r using??
Have you upgraded to SP1??

If yes..re-install SP1 again for ur windows.
I
Jun 30, 2007 at 10:58 PM
These issues may occur if you upgrade Windows XP SP1 Home Edition to Windows XP Professional, or if you use the System Restore feature to restore to a state prior to SP1, as these actions may cause an integrity problems with registry settings in the System hive.

To resolve these problems:
1. Copy / Paste the following to a notepad file,and then save it as Solution.reg
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan]
"ObjectName"="LocalSystem" 
[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP\25] 
[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP\26]

2. Merge the Solution.reg file with you registry.(i.e Double click on it and then press Yes]

3. Shutdown and restart Windows XP.

OR

1. Browse to the %SystemRoot%\inf\Sr.inf file."%" satnds for the Drive where ur Windows is installed)

2. Right-click the %SystemRoot%\inf\Sr.inf file and press Install.

3. Press Browse in the Files Needed dialog box and select the Sr.sys file from the i386 folder of the Windows XP CD-ROM.

4. Press OK.
5. When the install is finished, shutdown and restart Windows XP.

Hope This helps you ​
sauravktr
Jul 2, 2007 at 3:37 AM
Go To
Run-->> services.msc -->> check here that "Remote Access Connection Manager" is started or not..if not then start it....
slugger
slugger #5
Jul 2, 2007 at 5:58 PM
check out if the dependencies, me think it depends on telephony service, start it and see if your service starts