DIGIT-ARC read-only archive · snapshot: July 23, 2026

Can't Install Windows!! And Gfx Card dies!!!

7 posts · originally from https://geek.digit.in/community/threads/cant-install-windows-and-gfx-card-dies.109462/

H
HellKing Original post #1
Feb 25, 2009 at 11:52 PM
Hey guys,
I'm suffering from a BIG HEADACHE nowadays!!!


I CAN'T INSTALL WINDOWS

Okay, I'm a little frustrated right now cuz of my boards exams are comming and I can't watch f.r.i.e.n.d.s on my PC!!


Here's the thing :

I can boot up with Windows XP/Vista/7 disk and start installation normally. When the installation completes then comes the part of restarting....when it restarts, there is just a blinking cursor after the POST screen and nothing happens!

My best guess is that my HDDs's MBR has died on me :(


I'm running 2 HDDs
Segate 160gig and WD 250gig, I'm trying to install on a 40gig partition in the 160gig segate




And another problem!

Ever since I brought MSI 9600GT 512MB OC edition.....I haven't been able to play games on it properly....whenever i start a game like NFS Most Wanted, the game would run fine for some time and then the system when BZOOOK with the monitor going on a stand-by and the system going on to a endless loop of sound playback......I ititially thought it was a overheating problem but recently I put it on a stress test with 3dmark Vantage on windows 7.

I brought the card last june and I guess I'm still under warranty, should I get it replaced with a 9600GT only or shall I go for replacement with a 8800 instead (if that's possible)


my guess is that the card has problem with DX 9 as all my crashes came on Win XP and 3dmark ran fine on Windows 7. But now I can't confirm my hypothesis as I CANT INSTALL WINDOWS


:( :( :( :( :( :( :( :( :( :( :( :( :(
H
Feb 26, 2009 at 10:46 AM
Cooler Master xtreme power 500W
The Sorcerer
Feb 26, 2009 at 11:00 AM
when it restarts, there is just a blinking cursor after the POST screen and nothing happens!
Make sure no usb/firewire/e-sata devices are connected to pc while booting. Make sure the boot priority is hard drive not removeable/cd. Change the crappy power supply. All doubts are cleared here.
*thinkdigit.com/forum/showthread.php?t=104472
Here's the thing. Not necessary its the HD or graphic card. It could be the rams well. Even if you change the psu, there is a possibility that one/all of these components might needs to be changed due to possible damage happened because of the previous psu. At any circumstances do not stress test/benchmark using the current psu. Get the psu changed (recommendations are given on the link). Make sure the cables are not spread around within the case, tie them together using cable ties. Make sure the fans are pushing in or pushing air out. On the next post, mention the rest of the configuation as well.
rhitwick
Feb 26, 2009 at 11:03 AM
First check out ur RAM on ur frnds PC, if found all right then change slots for them (most probably its ur RAM)

Get hold of a win98 CD, and go to cmd promt while booting, run checkdisk to be sure if its not a bad sector in ur HDD...

If HDD is allright, while installing do a full-format with NTFS and then install windows, don't opt for quick-format.

If nothing works, then its ur MOBO RAm slots, data cable or anything else which I can't imagine.
The Sorcerer
Feb 26, 2009 at 12:23 PM
^^ You dont need a windows 98 to run checkdisk. Google for hd tune and run error scan.
rhitwick
Feb 26, 2009 at 12:33 PM
^^ You dont need a windows 98 to run checkdisk. Google for hd tune and run error scan.
I don't know if HD Tune can run at boot time, so I suggested him win98 CD...:-o