DIGIT-ARC read-only archive · snapshot: July 23, 2026

Compaq presario V3000 problem

7 posts · originally from https://geek.digit.in/community/threads/compaq-presario-v3000-problem.58392/

Kaushal Hiwarkar
Kaushal Hiwarkar Original post #1
May 22, 2007 at 12:02 AM
I own Compaq presario V3000 . I want to format it through winXP CD. but when ever I boot from bootable XP after loading initial files/drivers it display 3 message:
1) To install XP press Enter
2) To repair press R
3) To quit press F3
But when I press Enter for installation it show following message:

There is no hard disk drives detected


Why it is so ?
Choto Cheeta
May 22, 2007 at 12:23 AM
That's Because may be u are using a SATA/RAID controller for Which Windows XP doesnt come bundle with Driver's...

To Me, there are 2 way's

For the 1st one you can download the Drivers from here, *h10025.www1.hp.com/ewfrf/wc/softwa...535-1&lc=en&cc=us&dlc=&product=1817059&os=228

then put them on a floppy drive

Boot from Installation CD, Put the Floppy in the drive, and Press F6 when Windows Installation ask for a Third Party Hardware driver,

*www.addonics.com/support/faqs/images/sataboot_f6.gif

Now select the driver for ur device !!!!

Now the second Method and i think u may not have Floppy in that NoteBook :( so, here is the option for u, Download the driver, Get ur self WinRAR and then use it to Extract or UnPack Driver in .inf type files, now Download N-Lite to Integrate the Driver in to ur Installation Disk, in that way u will not need a floppy drive !!!

Link = Guide how to use n-lite *www.nliteos.com/guide/ Note, Follow the Part which says how to Integrate Drivers, :)

P.S. Windows XP comes with Intel SATA controller driver bundled, u shouldnt have faced the issue in 1st place, wonder why u are facing it... From Where did u get the Windows Installation CD ??
Kaushal Hiwarkar
May 22, 2007 at 11:21 AM
Thanks I think It will work. I will reply you soon
Choto Cheeta
May 22, 2007 at 5:16 PM
OK.. !! Good Luck with it, :)
R
Mar 17, 2010 at 11:35 AM
Hi,
I have purchased Compaq Presario V3000 with model no is v3133au ,AMD Turon with Nvedia graphcs card. I used it only for year after that laptop was dead and now no waranty for this. Can I change the mother board with Intel processor and Intel Graphics chipset.
Please let me know if the laptop model supports the intel boards.
Many Thanks,
Rama devi.
Chennai, India