Config question

For ram go for gskill ripjaws or corsair xms3, and what's your budget for cabinet

Pokefan said:

I am planning to get a new PC and have already decided the chip (phenom ii x4 955) and MB.

Click to expand...

If u state ur budget n comps needed, if possible v can try to squeeze SB config...

Please fill THIS

1. What is the purpose of the computer? (Note: If you are planning to say multimedia, you will have to be more specific as all types of systems are capable of doing that)
A:Mostly projects(MS office). some photo/video/audio editing, medium gaming and other misc stuff
and very very light 3d rendering(blender)

2. Are you open to alternate ideas/products giving similar better performance but offering more VFM/ sellers? If not- why?
A:i am open to an alternate product, but i really like my choice

3. What is your MAX budget?
A processor+MB+RAM+SMPS+Cabinet: rs.15000(i know, tight)
The smps need not be there if i only require 450W
4. Planning to overclock?
A: No

5. Which OS are you planning to use?
A Possibly a dual boo
XP and ubuntu, but may install W7

6. How much hard drive space is needed?
A: i already have an HD

7. What resolution will the screen run at & whats the size of the screen you want? If you already want have one and want to use it, mention its resolution and size.
A: Already have one: size 17 inch r: 1024x768

8. How would you rate your hardware knowledge from the count of 1-10? (1 being the lowest, 5 being you are somewhat in sync with the current performers and 10 being the highest)
A: 6

9. Have you ever built a desktop before or will this be done by an assembler?
A:i have only changed the RAM and some cards. so it will be done by an assembler

10. When are you planning to buy the system?
A:in a few weeks

11. Are you one of the types looking out for "future proof" configurations?
A:yes

12. Are there going to be any components that you don't want to include in this new rig? If yes, do mention.
A:i already have every thing else(monitor, k/m, op drive, ups etc.)

13. Which city do you live in and are you open to buying from shops from other city/states?
A:kerala(might buy online too)

14. Mention any other points if deemed necessary
A: i am planning to buy the asus amd m488tml unless there is some thing else

Pokefan said:

2)An SMPS calculator calculated my watt req. at 406W. i already have a recently bought 450W one. Do i need something more(like 500 or 550)?

Click to expand...

Brand?

UMAX unp 450

^that smps is not good
better safe than sorry
so get FSP 400W/500W

^^ I think it is a SMPS, not ups

FSP 400W/500W

Click to expand...

thats the one i had my eye on.
but my config requires more than 400 so i'll choose 500

PSU should not b judged by the wattage label but by efficiency...

Jus return that PSU n get FSP...

^^ Bang & just a Bang for the buck.

IMO avoid that 955 coz of heating issues.

So, AMD's heating issues started again..

saswat23 said:

So, AMD's heating issues started again..

Click to expand...

lulz.... still believe this myth.. That is the issue with that particular model and don't say AMD HEATING issue. It points overall brand.

Also @OP

Get X4 as dep5kor suggested. Better for rendering.

^^ well said ...

955BE is not a bad choice if paired with after market cooler like CM Hyper 212+.

But whatever config i have suggested is used by another user in TDF. If any doubts PM him.

Sam [Famous as Sam.Shab]
*www.thinkdigit.com/forum/members/88006.html

@Saswat: refer this.
Heating Issues: *www.thinkdigit.com/forum/cpu-motherboards/136739-phenom-ii-x4-955-heating-problem.html

^ I think 955BE works fine with stock cooler as well, till its overclocked. I am using it for last couple of months with idle temp 39-41 and temp while gaming 56-57 and 68 when used Prime95...the issue mentioned could be an isolated incident.

I am not really pointing towards the AMD for this issue. I meant, the earlier problem is now showing signs in the newer models.
And clearly i am not against AMD. Its just my view on the heating issue of 955BE.

saz said:

^ I think 955BE works fine with stock cooler as well, till its overclocked. I am using it for last couple of months with idle temp 39-41 and temp while gaming 56-57 and 68 when used Prime95...the issue mentioned could be an isolated incident.

Click to expand...

I agree with it, just google the following "site:thinkdigit.com Phenom II X4 955 BE heating problem."

Moreover temperature problems are not only limited with Overclocking ; poor maintenance & usage of local made PSU's also contibutes a lot.

^yeah, poor maintenance & improper airflow in the cabinet are some of the most probable culprits.
One of my friends installed the HSF incorrectly and somehow managed to leave a gap b/w processor and HSF base which caused the temp to shoot up drastically on 955BE.

I myself had some few problems with installations of Corsair H50 & increase in temps of i7 920.

The problem was presence of air bubbles in thermal compound, for which i got stuck & broke my h50 off atlast.

Still i use Phenom 2 940 , which emit lot of heat using Hyper 212+ stays cool now , Phenom 2 955 is good one compared to my proccy ! u can OC up to 3.5 to 3.6 with good after market cooler !