cooling fans and accessories

> What is your maximum, budget?

> Do you necessarily need fan grill and controller?

budget is not fixed but max around 150$
ya i need them cause the fans are super fast to decrease fan noise if required that's y i need the controller .grills r required because lose wires may get ripped to shred or my fingers gets cut etc.they r cheap around 1.25 each

Why do you need such high airflow fans?
As for the fan controller i would suggest you this
NZXT Sentry 2 SEN2-001 5.25" Touch Screen Fan controller for upto 5 Fans - Scan.co.uk
why don't you get some custom fan grills?

Importing fans? Take a look at these units:
Helix120 BW with PWM Speed control Fan - Rouchon Industries Inc., dba Swiftech - PC Liquid Cooling Systems CPU Cooler VGA Water Block Heatsink Pump Radiator Heat Exchanger Kit

Personally, I would stick with hydro over sleeve. Infact, better off avoiding sleeve bearings. There's also fluid dynamic bearing and ball bearing type you can take a look at, or else grab those corsair performance series fans.

^ also check out CM Excalibur

avinandan012 said:

^ also check out CM Excalibur

Click to expand...

well the excalibur fans are not very vfm.
Why not get some gentle typhoons?

PC Case Mods Store since you are open to importing, check this

My cart pic
i am open to options.
custom fan grills will overshoot budget and my pc is dragon themed
gentle typhoons are gentle need monster
i also want to use 120 x 38 mm
nzxt touch screen cannot control those fans and i dont like the idea of touchscreen
also buying
MountainMods.com-Fans & Related-Fan Filters-Bitspower 120mm Mesh Fan Filter - UV Red
MountainMods.com-Computer Cases-Parts-Acrylic 5.25 Bay Covers-Mountain Mods Acrylic Triple Bay 120mm fan mount. (red color)
pc case mode store is costly

avinandan012 said:

^ also check out CM Excalibur

Click to expand...

Yeah I have one. Removeable blades. But they seem to operate like how sleeve does, considering you can see the shaft on the remove blade portion. They're noisy on high RPM.

actually i will use controller so that is not a worry i want high speed bcoz used those coolermaster led fans and they suck big time.did not use excaliber but i doubt it will push so much air thats y i opted for 38mm since my case is huge and have enough space.
please suggest fast as i am gonna buy within the next hour.

completed my order check post 9

Why use controller? Those fans are pwm's and can be controlled through software.

i dont want to risk my motherboard fan headers.

Get these: Deepcool UF120 - Deepcool: Flipkart.com

arko1983 said:

i dont want to risk my motherboard fan headers.

Click to expand...

What makes you assume there is a risk?

The Sorcerer said:

What makes you assume there is a risk?

Click to expand...

high current draw maybe?

bought these items

4xPanaflo 120x38mm High Speed FBA12G12H1BX by NMB-MAT

1xScythe 120x25mm SlipStream SY1225SL12SH - 110 CFM

3x fan grills

1x MountainMods.com-Fans & Related-Fan Filters-Bitspower 120mm Mesh Fan Filter - UV Red
1x MountainMods.com-Computer Cases-Parts-Acrylic 5.25 Bay Covers-Mountain Mods Acrylic Triple Bay 120mm fan mount. (red color)(for front intake)

total cost around 137$ including shipping

some acrylic dragon 120mm fan guard for the front panel and acrylic window for the sides will complete my case build.got hold of some acrylic cutters in kolkata if i have the time will complete it.

harshilsharma63 said:

high current draw maybe?

Click to expand...

correct

my mobo warranty is over its cost was 20k when i bought it.so dont wanna risk it.

specs of the panaflo fan that i bought

Panaflo/NMB-MAT DC Axial fans from Panasonic suit a wide range of applications. Thanks to their unique "Hydro Wave" bearing system, these fans can create a respectable airflow at very low noise level. Best choice when it comes to cooling.
Technical Information:

Rexus SKU Number 25125
Manufacture Panasonic-NMB-MAT
Size/Dimension 120x120x38mm
Mfg.Part number FBA12G12H1BX
Bearing Type Hydro-wave (HWB)
Connector Type 12" Bare wire or attachable 3pin or 4pin tail
RoHS Status RoHS ( Yes )
Voltage-Rated 12V DC
Power-Rated 4.44 W
Speed 2500 RPM ( Hi speed with RPM sensor )
Air Flow 103.8 CFM
Noise 41.5 dBA
MTBF 30,000 hrs
Packing/Weight Bulk - 40pcs/Box, 30 lbs
Blister Retail box - 3pin tailed with 4 screws included

harshilsharma63 said:

high current draw maybe?

Click to expand...

No. There is no risk.

please post pics Show off

some serious cooling going there

k will post when i get the items.have to wait 2 months to get them.