DIGIT-ARC read-only archive · snapshot: July 23, 2026
S
slyfox Original post #1
Jul 11, 2007 at 2:59 PM
i hv got a gigabyte ga 965P-ds3 mobo n e6300 processor.
i want to o/c it. can ne1 suggest me what is the cpu temperature that i shud mark as my upper limit.
do i need 2 use ne cooler 2 cool down my processor. if yes, can ne1 suggest me a cooler n its approx cost.
Choto Cheeta
Jul 11, 2007 at 5:17 PM
Well Many consider that for C2D Hot temp limit would be 70c on load....

Where as I try to stay more or less under 60c at any point (on load in hot conditions)

So i would suggest never cross the 65c Limit (24x7 On load too)...

do i need 2 use ne cooler 2 cool down my processor. if yes, can ne1 suggest me a cooler n its approx cost.

Well if C2Ds stay under vcore 1.29 then u may not need any extra cooling and disbale the Quite FAN control to run stock Intel Cooler FAN on full Speed...

See even with my E6600 and ASUS P5N-E SLi on stock I am running that in 2.93 GHz and Idle Temp is 42 / 43 c on load 55c MAX !!! vcore 1.27 / 1.28 .... to go beyond I need to take the vcore in above of 1.3 and as soon as I cross 1.3 , limit temp goes up to 48c idle and 60 / 61c on load...

So as I want to go farther i thought I need a Cooler, best AirColler would be ThermalRight Ultra 120 eXtreme....

I have just ordered one from *www.sidewindercomputers.com/thulex.html costed me some 110 USD along with its 120mm Panflo Ultra High Speed FAN and I am still waiting for it... !!!

According to reviews I guess this one is the Best out there !!!
V
Jul 11, 2007 at 6:49 PM
I had seen a thermaltake all copper heatsink with a jumbo but quiet fan with speed control.
Rs 2200/-
J
janitha #4
Jul 11, 2007 at 7:43 PM
vutonium said:
I had seen a thermaltake all copper heatsink with a jumbo but quiet fan with speed control.
Rs 2200/-
Where?
V
Jul 11, 2007 at 8:03 PM
Lamington.dnt remember what shop.Wish my cpu needed it.I use a p3.
P
Oct 18, 2007 at 8:25 AM
Can someone suggest me good cooling solution for Q6600 processor?

I really want to keep my components cool and ready to shell out some money for it. I don't want to burn anything.

BTW I am not going to overclock either my proc or gfx.