DIGIT-ARC read-only archive · snapshot: July 23, 2026

DVD Drive not showing.

8 posts · originally from https://geek.digit.in/community/threads/dvd-drive-not-showing.112191/

toofan
toofan Original post #1
Apr 3, 2009 at 9:25 AM
Friends,

Suddenly My Moserbaer LightScribe DVD Drive is not shown by Win XP from yesterday.
and its taking a long time at startup.
I have to manully select the Boot drive as hard disk.

Whats gone wrong.

My config.

Intel C2Duo E6750
4 Gb Ram Kingston DDR2 800 Mhz
8600 GT Palit super
Zebronics Lava cabinet with 400W PSU.
MSI P-35 Neo Motherboard.

thanks.
The Sorcerer
Apr 3, 2009 at 10:17 AM
Is that IDE or sata? Certain updates of windows xp made pio/dma to conflict.
toofan
toofan #3
Apr 3, 2009 at 3:48 PM
Its connected via sata cable.
The Sorcerer
Apr 3, 2009 at 3:55 PM
Is the drive getting detected on bios? Make sure the settings are on DMA on bios as well as IDE/ATAPI controller on device manager.
toofan
toofan #5
Apr 5, 2009 at 11:56 AM
some time its gets and sometime not. and its set to Auto DMA mode.
The Sorcerer
Apr 7, 2009 at 4:12 PM
If its getting detected sometimes then there's 4 possibilities:
Change the sata cable.
Try with a different sata power cable.
use a different sata connector on the mobo.
Your dvd drive is on the verge of dying.
toofan
toofan #7
Apr 7, 2009 at 5:08 PM
I will change the Sata Port and also the cable if needed. And post the results.
toofan
toofan #8
Apr 10, 2009 at 10:57 AM
Its working now after unplugging the cable and changing the port.
Thanks.