DIGIT-ARC read-only archive · snapshot: July 23, 2026

dvd drive not working

8 posts · originally from https://geek.digit.in/community/threads/dvd-drive-not-working.24805/

R
Rohan Rastogi Original post #1
Mar 3, 2006 at 12:17 PM
I have a PC with P4 630, 512MB RAM, GeForce 660GT etc. without a UPS or Floppy Drive. The problem is that my Samsung Octoedge SH-M522C Combo Drive is just not working after a power failure. It doesn't show up in My Computer and in Device Manager, its status is

Windows cannot load the device driver for this hardware. The driver may
be corrupted or missing. (Code 39)

The troubleshooter doesn't help either and there are NO drivers on the Net. I have a driver CD but as my Cd drive's not working ....

Help guys!!!
S
Mar 3, 2006 at 1:04 PM
Assuming u have XP, uninstall ur drive and then restart ur computer. XP shud automatically detect it and install appropriate drivers for it
D
Mar 3, 2006 at 8:50 PM
man i have a same problem here with my DVD rom it reads all the DVD'S exept Data DVD I can not view its content even the digt one's
it says Windows cannot read from the disk the disk might be corpted or windows can not read the format
It is compaq's DVD rom Pentium III 384 SD RAM Windows XP
HELP 250 DVD'S COLLECTION IS AT WASTE
R
Rohan Rastogi #4
Mar 4, 2006 at 11:18 AM
Hey I tried the Uninstall-reinstall method (I have XP Pro). Here's what..

It detects the drive and displays the foll

TSSTCorp CD/DVD SH-M522C detected
then
CD ROM drive
then
A problem occured during installation, the drivers are corrupted or not installed.

Helppppppp!!!
A
Mar 4, 2006 at 3:11 PM
Rohan Rastogi said:
I have a PC with P4 630, 512MB RAM, GeForce 660GT etc. without a UPS or Floppy Drive. The problem is that my Samsung Octoedge SH-M522C Combo Drive is just not working after a power failure. It doesn't show up in My Computer and in Device Manager, its status is

Windows cannot load the device driver for this hardware. The driver may
be corrupted or missing. (Code 39)

The troubleshooter doesn't help either and there are NO drivers on the Net. I have a driver CD but as my Cd drive's not working ....

Help guys!!!

If you go to *www.samsungodd.com you will find firmware updates for this drive. If that doesn't work, download "winmtkflash" from here:

*digi.rpc1.org/mwf.htm

Try using IDE mode if the ATAPI mode does not work. Read the instructions on the web page very carefull, as all this is very risky.

I had one of these "Octoedge" drives with me, and mine NEVER wrote a CD correctly, always having power calibration errors. The calibration unit in the drive seems screwed up, as lots of drives of this model are going repeatedly for warranty, and my drive went for warranty service 3 times and yet didn't get fully repaired! My dealer told me that this model was problematic, lots of units were going in for service. In the end, I decided to throw away this drive and buy an LG, which works really good.

Good luck with your drive!
R
Rohan Rastogi #6
Mar 6, 2006 at 1:28 PM
Hey guys.

The latest Fast Track (Troubleshooting Your PC) is an eye-opener!!

I tried a simmmmple system restore. It worked!! It actually worked !!!


Yipeeeeeeeeeee!!!!!!!!!!!!!!!

Thanks anyway guys!
A
Mar 8, 2006 at 1:18 AM
Then it was just a case of corrupt Windows drivers.....Good for you. You are lucky to have a SH-M522C combo drive that does write CDs correctly. :)
Vyasram
Vyasram #8
Mar 8, 2006 at 9:22 AM
duelmaster said:
man i have a same problem here with my DVD rom it reads all the DVD'S exept Data DVD I can not view its content even the digt one's
it says Windows cannot read from the disk the disk might be corpted or windows can not read the format
It is compaq's DVD rom Pentium III 384 SD RAM Windows XP
HELP 250 DVD'S COLLECTION IS AT WASTE

i have the same pron with my sony dru810a. It works in one os xp64 and doesn't work in another xp32.

Temp soln

Use ultraiso or similar software and extract the contents frm it