DVD Writer Problem · DIGIT-ARC

C

Hi

Can anyone please solve my problem.

I have an Amd Athlon 64 bit system with 1 gb of ram and i have been using a Sony Dvd writer for a year and a half but suddenly i started facing problems with it, when ever i used to load a DVD or a Cd it used to use all my computer resources and would make my system really slow.

It took about 5 hours to write a 4.6 GB dvd and about 20 min to copy a 700 mb file.

So i bought a new writer and installed it in my system (Sony DRU 170 C) just a couple of days before.

It ran fine for a week but now it is also giving me the same problem.
Can anyone tell me where my problem is located cause i dono where to look for it.

Thanks

Its some kinda conflict with the IDE controller or some hardware resource sharing problem. Try making it slave or master[opposite to the one uve been using].
Also connect the drive alone in a seperate IDE cable if uve a free IDE slot in ur mobo. This is sure to solve the problem.

In your BIOS try enabling DMA for the HDD & DVD Writer.
Try disabling antivirus and other resource hungry applications when you burn

check the DMA status

ya do what mod-the-pc says
it should help

Try resetting the DMA
Use this tool

Else, reinstalling XP will solve the problem.

Same problem discussed here, here and here. See the solutions

C

i'll surely try all the possibilities today thanks a ton!!!!!
If i still have a problem i'll surely write back
Thanks once again
__________
yah that did solve my problem thanks a toon!!!!!!

Well, So, DMA was the culprit...