Hard disk vibration · DIGIT-ARC

B

The vibration started a couple of weeks back. It starts at boot up and continues. Temperatures are normal 28-30 degrees.

Physically touching it, its vibrating a good bit.

The vibration is so bad, I can feel it on the case, desk and keyboard.

Its a WD 500GB SATA3 bought in July.

Could it be heading for failure?

B

I think I posted in the wrong section before. :-D

The vibration started a couple of weeks back. It starts at boot up and continues. Temperatures are normal 28-30 degrees.

Physically touching it, its vibrating a good bit.

The vibration is so bad, I can feel it on the case, desk and keyboard.

Its a WD 500GB SATA3 bought in July.

Could it be heading for failure? Can I get a replacement?

send it for RMA. Seems like it has gone kaput. You should receive a proper replacement. Also do a chkdsk from command prompt to check for bad sectors.

B

thetechfreak said:
send it for RMA. Seems like it has gone kaput. You should receive a proper replacement. Also do a chkdsk from command prompt to check for bad sectors.

Thanks for replying.

I ran the WD diagnostics tool. The quick test reported no errors.

I also ran the error checking under properties which also yielded no errors.

apply for WD RMA. its better to be safe than sorry. let WD test & fix your drive.

Scan your HDD using HDtune & post the screenshot of the result here.

@blca05, check the screws used to fix the HDD to the chassis. Lossed screws might produce more vibration.

HDD do vibrate due to moving parts inside it. you can attach rubber pads in between the HDD and the chassis, that will reduce the vibration to minimal. Also check the SMART status using HDD monitoring tools like HD tune.

B

Sam said:
apply for WD RMA. its better to be safe than sorry. let WD test & fix your drive.

there are no bad sectors just horrible vibration.

*i655.photobucket.com/albums/uu271/harsham05/4.png

*i655.photobucket.com/albums/uu271/harsham05/3.png

*i655.photobucket.com/albums/uu271/harsham05/2.png

*i655.photobucket.com/albums/uu271/harsham05/1.png

d6bmg said:
Scan your HDD using HDtune & post the screenshot of the result here.

CA50 said:
@blca05, check the screws used to fix the HDD to the chassis. Lossed screws might produce more vibration.

HDD do vibrate due to moving parts inside it. you can attach rubber pads in between the HDD and the chassis, that will reduce the vibration to minimal. Also check the SMART status using HDD monitoring tools like HD tune.

Im using a screw less or tool less mount.

you can still apply for RMA. hard drive vibrates a bit. but first check if the mount is loose. if you can install HDD in the floppy are of your system & check if the vibration gets low. even i am using a tool less mount & there is absolutely no vibration.

B

Sam said:
you can still apply for RMA. hard drive vibrates a bit. but first check if the mount is loose. if you can install HDD in the floppy are of your system & check if the vibration gets low. even i am using a tool less mount & there is absolutely no vibration.

the mount is secured.

The spacing between the screws for the HDD mount is larger than that for the floppy mount. Im using a Elite 430.

Hence I cant use the floppy area.

The vibration started a few weeks ago.

@blca05, from the screenshot the bad sector is not clear?

Either post a screenshot of the 'health' tab or of the 'Error scan' tab, but don't click on the "speed map" button

@blca05, from the screenshot the bad sector is not clear?

Either post a screenshot of the 'health' tab or of the 'Error scan' tab, but don't click on the "speed map" button

B

CA50 said:
@blca05, from the screenshot the bad sector is not clear?

Either post a screenshot of the 'health' tab or of the 'Error scan' tab, but don't click on the "speed map" button

@blca05, from the screenshot the bad sector is not clear?

Either post a screenshot of the 'health' tab or of the 'Error scan' tab, but don't click on the "speed map" button

*i655.photobucket.com/albums/uu271/harsham05/Untitled.png

Seems OK to me

Does it shows any warning under the health tab ?

B

CA50 said:
Seems OK to me

Does it shows any warning under the health tab ?

No warnings but horrible vibration.