DIGIT-ARC read-only archive · snapshot: July 23, 2026

DIGIT-ARC / Hardware / Hardware Q&A

Help me out wid my AGP Card & Mobo

2 posts · originally from https://geek.digit.in/community/threads/help-me-out-wid-my-agp-card-mobo.41016/

R
rabbuluvsu Original post #1
Nov 12, 2006 at 10:49 AM
I own a Mercury 845GLM-P Mobo, Cel 2.00Ghz Proc and a 64MB GeForce MX440 AGP Card.
I've plugged the card onto the board but when I try to connect the Monitor cable to the card, there is no display. Neither there are any error beep sounds.
The card is working fine on my other system- Intel 815(FIC) & Pentium III-733 Mhz Mobo & Proc.
Plz. suggest the cause and cure of the problem. Is there a need to change the jumper settings on the board which disables the onboard video agp.
If yes kindly suggest how to do that.
assasin
assasin #2
Nov 12, 2006 at 1:40 PM
Dere aint no jumper setting on the mobo which disables the onboard gfx.Connect ur monitor to the mobo gfx port after installing the gfx card and see if u get display.If yes den deres a prob with the AGP port.U cud also try using a diff gfx card.