Help system restarting

Install updated drivers ....and try to scan with an effective antivirus

Bro, are you sure there aren't any issues regarding heatups in your cabinet? Remove the card and run HWMonitor for Temperatures, Note them down.

Now, insert the GFX Card and repeat the same..

Now, compare the temperatures..

Disable lucid virtu - check the ram modules - if possible remount them.

it seems as heatup issue...try removing gfx card and run with previous config...if runs smoothly then gfx card issue..

^^ I had said the same

koolent said:

Bro, are you sure there aren't any issues regarding heatups in your cabinet? Remove the card and run HWMonitor for Temperatures, Note them down.

Now, insert the GFX Card and repeat the same..

Now, compare the temperatures..

Click to expand...

Monitor temps with HWMonitor.

thanks guys........
i will check and post back........


secondly why domt i see my boot screen the display becomes visible at the login screen..........before installin g card and lucid virtue everything was fine........

1) Run memtest86 on your RAM and see if it comes up OK (or use any memory tester)
2) Check the power connection to your graphics card. I'm thinking either the graphics card or the PSU has problems.
3) Switch the DVI/VGA port on your graphics card (your card should have two) and see if the problem repeats.

guys i checked the hwmonitor just after the system restarted...

i will post the memtest result also , i have not connected the vga to gpu as its in virtue mode but i will try that soon and post again


*img14.imageshack.us/img14/6971/46053536.png

this pblm only occurs when i game.....

my system usually stays on for long time, never occured this pblm but after i installed graphics card and when i play games it shuts down roughly aftre 30-45 minutes.

so i dont think pc will show this issue if i remove the card.....

and i think th temp shown is normal i guess........

i dont have a cd drive to check memtest and niether a linux system to make a bootable usb..is their any other way to chek memory problems
....... i will check connecting directly to graphic card tommorow and post back

hello frnds

has you ppl said i connected the vga direct to graphics card ...... and played mafia2 for about 1-1/2 hrs ... no shut down happened... i also changed the ram socket.

so what may the pblm and after playing i recoreded the temp again....

thanks frnds for the help , its working without freezing now but what may have caused the pblem......

and i tried memtest86 but its always stuck..... but i tried it in my laptop the memtest worked fine......


*img29.imageshack.us/img29/5795/capture2rc.png

^^faulty ram ???!!

or the mobos ram socket may have some issue.

@ OP - if the memtest86 not working try memtest86+ app - even if it's not working try some resource heavy games like Crysis 2, Battlefield 3, Metro 2033, Skyrim with HD texture pack etc. ie games which can put huge loads on ststem resource - if the system remains stable for 2-3 Hrs. while playing those games most probably your pc is ok

your voltage values are all wrong. 3.70v on +12v rail.if these values are correct then i am amazed that your pc even managed to run for 15 min(probably because G620 is a low power cpu).

^^ what may be the pblm then.... is that a aserious issue.... i was planning on upgrading to ivy i5... but from what ur saying will i end up my system being fried.....

frnds pls put some light on what whitestar_999 mentioned.....

iam playing games and there is no freezing or shutdown occuring but....pls comment on what whitestar_999 menstioned

for comparison a screenshot of my system values:
*img708.imageshack.us/img708/2816/hwmonitor1v.png

Uploaded with ImageShack.us

@ zacfx05 - software apps ain't perfect always when it comes to measuring volt and temps ( I've experienced this before ) - you better use your bios / UEFI system info to find proper volt reading of +12v rail.

Did you try checking the SMPS for faults ? Try getting another SMPS and then plugin your Card. Also reset your BIOS to default once.

topgear said:

@ zacfx05 - software apps ain't perfect always when it comes to measuring volt and temps ( I've experienced this before ) - you better use your bios / UEFI system info to find proper volt reading of +12v rail.

Click to expand...

thnx topgaer for giving that idea i checked it in the bios and it shows

+12v 12.354v

and another think at the star it shows details of gts 450 and it shows gf 106 so that also solved.........

all pblm solved i guess...
now iam just trying to play play much long er to c if the pblm still exist.........

^^ great play the games I've suggested and to patch the games to the latest version available.

^^ i played more than 3 hrs at a go no issues....

but when i play games on i-mode(lucid virtue) my pc restarts aftre 30 min approx....... why ths happenes.....

i unistalled and installed lucivirtue sw again but no use but in d-mode no issues what may be the pblm....

why wont i-mode wrk stable

Virtu i-Modeis for switching between integrated Intel HD graphics and a separate graphics card which saves power the graphics card isn't under load - the monitor should be plugged in with mobos any of the video output ports.

Virtu d-Mode enables the use of a separate graphics card while allowing the use of Intel's "Quick Sync"video tech, which runs on the iGPU. In this mode the monitor must be plugged into the graphics card.

The restart problem must be due to you are using the I mode but the monitor cable is plugged into the gfx card.

Modern gfx cards consumes very less power at idle - so you better use the D mode only