High CPU temperatures!!

I posted the same problem in QnA section but didn't get enough replies so I am posting here again.I hope I will get the help I need here.

I have a core two duo processor E6300@1.86GHz.I just downloaded speed fan and it shows my cpu temp. to be:

Cpu: 51c
internal temp.: 39c
remote temp: 45c
hd0: 40c
core0: 54c
core1: 52c

I don't know much about the temperatures but there is a burning sign on cpu,core0,and core1 temperatures which has scared me.

Is the temp. normal or I need to do something?

I think the temp. musta been much higher in past months as the climate is much cooler now.

EDIT:I checked with my friend who has the same PC as me and he found out the temp. to be much cooler about 36c:cpu and around 40c:cores.This is scary.

While 51 isn't something to lose hair upon, it certainly is hotter than it should be. How good is your cooling in the cabinet?

maintain a good airflow or put a fan near it if that would help, also u cud try being in a airconditioned environment and if that doesent help, wel u cant just open the laptop so try going to techies

QwertyManiac said:
While 51 isn't something to lose hair upon, it certainly is hotter than it should be. How good is your cooling in the cabinet?

My celeron processor runs at 55-56 degrees. :shock:

!

There is a coolermaster(at least the sticker claims it to be a coolermaster) fan(small one I guess) just above the heatsink and for the past two days I have opened my cabinet to allow full air flow but still no relief.

BTW My company made PC is still under warranty can I claim a replacement(of processor or heatsink) or atleast a reapir?

H

Please download coretemp i don't think speed fan is reliable.Coretemp is made for core 2 duo.It'll show the right temperature.

shady_inc said:
My celeron processor runs at 55-56 degrees. !

My Prescott runs at 70 degrees, no sweat.

Harvik780 said:
Please download coretemp i don't think speed fan is reliable.Coretemp is made for core 2 duo.It'll show the right temperature.

I have core temp.(version 0.95.4) too harvik and it shows the same temperatures i.e. core0:53 and core1:51.It also shows Tjunction:85c although I don't know what is that.

And yes thanks for replying.

H

The_Devil_Himself said:
I have core temp.(version 0.95.4) too harvik and it shows the same temperatures i.e. core0:53 and core1:51.It also shows Tjunction:85c although I don't know what is that.

And yes thanks for replying.

Tjunction is maximum temperature to shutdown and for core 2 duo its 85C

Any suggestions for the heating problem dude?

R

I have a long thread of the same issue & my vendor told me just chill.............................nothing to worry about I did many thing but could not get the cpu temp at 35-37 degrees.
Here is the link to that post *www.thinkdigit.com/forum/showthread.php?t=49815

Mine is the same processor, I changed 2 cabinets, 2 PSU refitted the processor but it still runs at 46 degree & my vendor said u burn it as much as u can, he will get it replaced under 3 year warranty.

He said so bcoz Intel core 2 dou have built in shield to shut down the comp at 85 degree, so u actually cant burn the processor. Running it hot actually does not indicate any problem as such except that you always keep in mind that ur friends comp is running cooler.

Mine is running perfectly, I over clock at times & the temp goes upto 60 degree even then it runs fine I have no problem, I was thinking to get gemini CPU cooler but still have not bought it. Its known to bring down temp by 7-10 derees.

If u visit any international forum & report that urs is running at 51 & ur friend at 35, they would say even 35 is higher, most of them would aim at 25-28 bcoz they use aftermarket heatsink fans.

Just chill u wont burn ur processor, though in my long post on the same issue I concluded that the difference is due to heatsink is not flat & it needs "lapping" thats the only thing I did not try.................that option is still open, but I am running fine though its hot as posted in screenshot below. Thisi was taken in summer time now it runs cooler at around 46-49, but the point I am making is that at higher temp too it was working fine.
*img248.imageshack.us/img248/9270/0068li2.th.jpg

@The_Devil_Himself

*www.thinkdigit.com/forum/showthread.php?t=67391

Why double Posting ??? few Solution is given there.... !!!

Sorry choto cheeta for double posting but I didn't get enough responses in that section.

Ok my final question What can I do to lower my PC'c high temp.?I am currently on stock cooling.

Y

first of all, clean ur cabinet .. remove all the dust . then try to clean ur stock heatsink ..and apply some arctic silver mx 2 thermal paste on ur cpu ..

also put some exhaust fans on the back .. put as many as ur case permits .. normally max 2 80mm or 1 120 mm fan ... also try to put one 80 mm intake fan at the front bottom side of ur cabinet if it has place for one ..

try this .. if it does not help and u can spend upto 3 k then, get thermalright ultra 120 extreme cpu cooler .. will solve ur all problems..

I have all the fans installed 3 in total.Guys I was also thinking about buying arctic silver 5 but I have no Idea how to remove my stock heatsink and then apply it.I am scared of doing it.How tough is it guys?Actually the problem is if I happen to f*ck my PC then I ain't gonna get a new one soon.

Core0: 47-54C @ at idle

..in my laptop

too high dude.means it will cross 65c easily on high loads(like me)

my OCed P4 3.45GHz HTprescott never crosses 62degrees at full load :lol:

without A/C :lol:

and also with stock cooling

^^thats good man p4 is suppoed to produce more heat owing to it's 90nm core compared to 60nm core of core2duos.

But suggest something guys which will help me solve my problem.I don't want a fried e6300.

yesterday i assembled a C2D E4400 PC for my frnd .the cpu fan got entangled in the wires and the proccy temp shot up to 96 degrees .i was out o breath for a moment but rectified the prolbm soon.

most important thing for cpu cooling .get a big cabby with lots of air vents and place more fans for exhaust in d cabby.

I keep my cabby open so really a lot of air vents and air flow.I have 2 exhaust fans still this overheating problem is gonna kill me.I hate it even as I know the upto 60c there is no problem.I WANT IT LOWER.

BTW utsav how did you manage 96c?It is supposed to auto shut down at 85c(tjunction temp.)

R

hahhahah...................................keeping it open is the 1st thing which will work against the temp, when open the rear exhaust wont suck the hot air out.

If u have 2 rear fans out make sure u have 2 front intake fans to maintain the proper airflow. keeping it open is no real solution for the processor heat, either u have a real bad heat sink & that will require lapping it, or ur heatsink fan is not seated properly.

^^Yea I guess so but how do I 'lap' it?I haven't ever touched the heatsink so what do you think is reinstalling the heatsink tough?

R

Lapping is a longer process & would require some reading on the web, 1st try getting a artic silver5 & reinstall the processor & heat sink, see if that solves the problem.