DIGIT-ARC read-only archive · snapshot: July 23, 2026

Home made Laptop cooler Digit Edition.

39 posts · originally from https://geek.digit.in/community/threads/home-made-laptop-cooler-digit-edition.181004/

seamon
seamon Original post #1
Jan 26, 2014 at 3:19 PM
My Y500 with dual GT 650m was overheating because of overclocking and the soft table cloth under it so I decided to create a laptop cooler using old cardboard Digit covers. The results are pretty good as now I am getting 82 degrees centigrade when maxing out AC IV Blackflag. Earlier the temps would go as high as 91 degrees centigrade.
I also decided to fit some LEDs because no laptop cooler is complete without LEDs.

*i39.tinypic.com/17pi4m.jpg

*i41.tinypic.com/2cesy0m.jpg

looks menacing?

*i42.tinypic.com/8ybyp0.jpg

My Rig:- The red Seamonster.

*i41.tinypic.com/29b24g6.jpg

Passage for air.

DIGIT FTW!!!
vijju6091
Jan 26, 2014 at 4:36 PM
Looks cool. well done matte :goodjob:
snap
snap #4
Jan 26, 2014 at 5:53 PM
great work :thumbs:
flyingcow
Jan 26, 2014 at 6:31 PM
nice...btw what is the white sheet on your KB?
seamon
seamon #6
Jan 26, 2014 at 7:35 PM
Keyboard protector.......protects the keyboard from dust, water and dirty hands. It came free with the laptop.
$hadow
$hadow #7
Jan 26, 2014 at 7:59 PM
M also thinking of getting one for mine any link for that kb cover??
seamon
seamon #8
Jan 26, 2014 at 8:10 PM
M also thinking of getting one for mine any link for that kb cover??

idk............I bought it locally. Should cost ~100-200 bucks.
nikhilsharma007nikx
Jan 26, 2014 at 8:39 PM
i can sell that to you if any one of you live in DWARKA
seamon
seamon #10
Jan 26, 2014 at 9:10 PM
how much? lol
ASHISH65
ASHISH65 #11
Jan 26, 2014 at 9:12 PM
Good work :thumbs:
S
SunE #12
Jan 26, 2014 at 10:12 PM
Hey good job. But a thing you should consider is removing that keyboard cover of yours. It actually blocks the airflow from the surface of the laptop to the internals. The keyboard part is not airtight you know. If you don't believe me then try spilling a glass of coke on it :p

Try removing the cover once & see if it makes a difference :)
sam_738844
Jan 26, 2014 at 10:50 PM
@OP how does it cool the laptop?
seamon
seamon #14
Jan 26, 2014 at 11:01 PM
Hey good job. But a thing you should consider is removing that keyboard cover of yours. It actually blocks the airflow from the surface of the laptop to the internals. The keyboard part is not airtight you know. If you don't believe me then try spilling a glass of coke on it :p

Try removing the cover once & see if it makes a difference :)

Nope no noticeable difference. In Unigine Heaven I reached 79 degrees without cover, then put cover, reached 80. Then I removed cover but it was stable at 80 without cover for a long time. Then again I put on the cover but temps did not go any higher for a long time again. I am estimating that removing the cover will decrease the temps by 0.5-1 degrees max when at full load for a very long time( say 2 hrs).



@OP how does it cool the laptop?

Check original post >.>
The results are awesome.
I think it will now allow me to OC a little more(maybe upto GT 755m SLI).
Any idea what is a good temp? 90-92 degrees?
sam_738844
Jan 27, 2014 at 7:41 PM
Check original post >.>
The results are awesome.

I think it will now allow me to OC a little more(maybe upto GT 755m SLI).
Any idea what is a good temp? 90-92 degrees?

lets try not to be weird this time :) , so i will go ahead and ask again, HOW exactly does the cardboard fit with LEDs cool the laptop? Lets assume that we already know it does, would want to know how.
seamon
seamon #16
Jan 27, 2014 at 8:12 PM
oh I hadn't understood you first time.
You see the laptop was suffocating because of the soft table cloth and air was not able to reach the suction tubes(whatever it is called) which is located at the base of the laptop for both the GPUs. The passage now allows cool air to come to the suction tube.
Also most cheap laptop coolers do the same.
flyingcow
flyingcow #18
Jan 27, 2014 at 10:25 PM
lets try not to be weird this time :) , so i will go ahead and ask again, HOW exactly does the cardboard fit with LEDs cool the laptop? Lets assume that we already know it does, would want to know how.
it raises the laptop a bit so air can be sucked in from the bottom, which was not possible earlier due to them getting blocked...:)
anirbandd
anirbandd #19
Jan 28, 2014 at 8:59 AM
@sam: :D

@seamonster: consider active cooling?? ;)
Gollum
Gollum #20
Jan 28, 2014 at 9:09 AM
My Y500 with dual GT 650m was overheating because of overclocking and the soft table cloth under it so I decided to create a laptop cooler using old cardboard Digit covers. The results are pretty good as now I am getting 82 degrees centigrade when maxing out AC IV Blackflag. Earlier the temps would go as high as 91 degrees centigrade.
I also decided to fit some LEDs because no laptop cooler is complete without LEDs.

*i39.tinypic.com/17pi4m.jpg

*i41.tinypic.com/2cesy0m.jpg

looks menacing?

*i42.tinypic.com/8ybyp0.jpg

My Rig:- The red Seamonster.

*i41.tinypic.com/29b24g6.jpg

Passage for air.

DIGIT FTW!!!

Loooooooooooooooooooool
your notebook is overheating because you have covered the keyboard. How do you expect it to get air inside properly.
the notebook takes in air from the keyboard and also the vents at the base enclosure.
seamon
seamon #21
Jan 28, 2014 at 9:39 AM
@sam: :D

@seamonster: consider active cooling?? ;)

What is active cooling? Can you please elaborate?


Loooooooooooooooooooool
your notebook is overheating because you have covered the keyboard. How do you expect it to get air inside properly.
the notebook takes in air from the keyboard and also the vents at the base enclosure.

er..... no.
As already discussed above removing the keyboard cover produces almost negligible results.
With this laptop cooler, I can now max out BF4, AC 4 and Ghosts in the playable FPS ranges of 25-30 while the temps staying at 80 degrees centigrade.
anirbandd
anirbandd #22
Jan 28, 2014 at 9:59 AM
What is active cooling? Can you please elaborate?




er..... no.
As already discussed above removing the keyboard cover produces almost negligible results.
With this laptop cooler, I can now max out BF4, AC 4 and Ghosts in the playable FPS ranges of 25-30 while the temps staying at 80 degrees centigrade.

Active cooling involves actively dissipating the heat using fans/water/etc.
sam_738844
Jan 28, 2014 at 10:28 AM
@OP some suggestions ( valuable and rational ) for your 650M SLIs. If you really want your GPU's to sustain a healthy long life up-to next 2 years without any throttling/overheating issues, here what you must do.

1. Take your"cooler" out from under the laptop.
2. Carefully take the LED's, and wires out.
3. Fold the cardboard into something which fits your "dump old stuff here" basket/cupboard.
4. DUMP it.
5. visit online/offline (retail) stores and buy a good quality Deepcool/Cooler Master cooling pad. Carry it home with a smile.
6. DIY LED and wires around the new cooler ( not recommended though )
7. Fit the modded cooler under the laptop.

P.S. -That keyboard cover of you'rs is receiving a lot of HATE from the holy spirit of games, the benign god of Hardware and Divine angels of "good looking PC". If you're not suffering from primary or focal hyperhidrosis in your palm areas, remove it ASAP for you have sinned and get a soft brush to clean the KB thrice a week.
seamon
seamon #24
Jan 28, 2014 at 10:40 AM
@OP some suggestions ( valuable and rational ) for your 650M SLIs. If you really want your GPU's to sustain a healthy long life up-to next 2 years without any throttling/overheating issues, here what you must do.

1. Take your"cooler" out from under the laptop.
2. Carefully take the LED's, and wires out.
3. Fold the cardboard into something which fits your "dump old stuff here" basket/cupboard.
4. DUMP it.
5. visit online/offline (retail) stores and buy a good quality Deepcool/Cooler Master cooling pad. Carry it home with a smile.
6. DIY LED and wires around the new cooler ( not recommended though )
7. Fit the modded cooler under the laptop.

P.S. -That keyboard cover of you'rs is receiving a lot of HATE from the holy spirit of games, the benign god of Hardware and Divine angels of "good looking PC". If you're not suffering from primary or focal hyperhidrosis in your palm areas, remove it ASAP for you have sinned and get a soft brush to clean the KB thrice a week.


lol. :lol:
rhitwick
rhitwick #25
Jan 28, 2014 at 11:25 AM
Having common sense is a privilege now :sigh:
anirbandd
anirbandd #26
Jan 28, 2014 at 11:26 AM
@OP some suggestions ( valuable and rational ) for your 650M SLIs. If you really want your GPU's to sustain a healthy long life up-to next 2 years without any throttling/overheating issues, here what you must do.

1. Take your"cooler" out from under the laptop.
2. Carefully take the LED's, and wires out.
3. Fold the cardboard into something which fits your "dump old stuff here" basket/cupboard.
4. DUMP it.
5. visit online/offline (retail) stores and buy a good quality Deepcool/Cooler Master cooling pad. Carry it home with a smile.
6. DIY LED and wires around the new cooler ( not recommended though )
7. Fit the modded cooler under the laptop.

P.S. -That keyboard cover of you'rs is receiving a lot of HATE from the holy spirit of games, the benign god of Hardware and Divine angels of "good looking PC". If you're not suffering from primary or focal hyperhidrosis in your palm areas, remove it ASAP for you have sinned and get a soft brush to clean the KB thrice a week.

Lol!!!

+1 ;)
seamon
seamon #27
Jan 28, 2014 at 11:43 AM
Having common sense is a privilege now :sigh:

You see I don't think my parent are gonna allow me to buy another upgrade to my laptop and may get angry if I say that laptop is overheating and stuff so.....
ramakanta
ramakanta #28
Jan 28, 2014 at 2:38 PM
I also decided to fit some LEDs because no laptop cooler is complete without LEDs.

wastage of energy :shock:
anirbandd
anirbandd #29
Jan 28, 2014 at 8:49 PM
You see I don't think my parent are gonna allow me to buy another upgrade to my laptop and may get angry if I say that laptop is overheating and stuff so.....

So remove that table cloth.

And put something under the backside legs of the lappy.

Don't be so desperate to mod. Apply some sense. :)
anirbandd
anirbandd #30
Jan 28, 2014 at 8:50 PM
And you could tell them its an upgrade for the table... Not laptop. :p
seamon
seamon #31
Jan 28, 2014 at 8:59 PM
So remove that table cloth.

And put something under the backside legs of the lappy.

Don't be so desperate to mod. Apply some sense. :)

Actually the second idea is not bad, I'll try to lift the laptop a little from the backside.
Besides I put some cosmetics effects on the "cooler" and now it's looking much better than the earlier trash.
I pretty happy with the results and I don't think I need anything more.
Assassin's Creed 4 30 FPS everything max 4xTXAA at 90 degree ultrabay GPU and 84 degree normal GPU, what more could I possibly want?
anirbandd
anirbandd #32
Jan 28, 2014 at 9:02 PM
An actual cooler.
anirbandd
anirbandd #33
Jan 28, 2014 at 9:03 PM
You have to realise those temps will damage the components over time.
seamon
seamon #34
Jan 28, 2014 at 9:24 PM
You have to realise those temps will damage the components over time.

I thought the kepler series was rated at 97-98 degrees centigrade.
anirbandd
anirbandd #35
Jan 28, 2014 at 10:04 PM
Yeah. Thats not operating temperature. Thats max occasional operating temp. Occasional. Not continuous.

Ever thought what it'd do to your body if it were constantly 50degrees?? Or if it was summer all year round??
seamon
seamon #36
Jan 28, 2014 at 10:18 PM
Yeah. Thats not operating temperature. Thats max occasional operating temp. Occasional. Not continuous.

Ever thought what it'd do to your body if it were constantly 50degrees?? Or if it was summer all year round??

Alright alright, suggest me a good laptop cooler.
Nanducob
Nanducob #37
Jan 29, 2014 at 6:59 PM
nice and cool