How feasible is that for a newbie? I don't think it will be available in the portage so soon.eddie said:
lsmod | grep yentasariq@ubuntu:~$ lsmod |grep yenta
yenta_socket 28428 1
rsrc_nonstatic 13440 1 yenta_socket
pcmcia_core 42640 3 pcmcia,yenta_socket,rsrc_nonstatic
sariq@ubuntu:~$ls -l /dev/sd* [PATCH] yenta: make bridge specific init code configurable
Make the bridge specific initialization code config options depending on
CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are
available. Disabling all of the specific tweaks cuts off more than half
of yenta_socket.ko.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
[PATCH] yenta: optimize interrupt handler
Don't waste cpu time in yenta interrupt handler when the interrupt was for
another device.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
[PATCH] PCI: quirk for IBM Dock II cardbus controllers
The IBM Dock II cardbus bridges require some extra configuration
before Yenta is loaded in order to setup the Interrupts to be
routed properly.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH] yenta: fix hidden PCI bus numbers
Fixup the subordinate number parent bridge of yenta Cardbus Bridges
before the PCI bus scan starts to make the cardbus cards which are
otherwise hidden for PCI scans work.
Signed-off-by: Bernhard Kaindl <bk@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
[PATCH] yenta: do power-up only after socket is configured
Power-up the card only after the socket is configured. power-down in
the old place. The point is not to power-up the card before the interrupt
routing is set up correctly.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>*archive.ubuntu.com/ubuntu/dists/dapper/multiverse/source/Sources.gz: Sub-process gzip returned an error code (1)