DIGIT-ARC read-only archive · snapshot: July 23, 2026

Intel DX58SO and 1600MHz RAM

24 posts · originally from https://geek.digit.in/community/threads/intel-dx58so-and-1600mhz-ram.158874/

hjpotter92
hjpotter92 Original post #1
Jun 21, 2012 at 5:43 PM
Hi all,

I have an Intel DX58SO (not the DX58SO2) motherboard with 3x1 GB of 1333 MHz RAMs. I am planning to upgrade it to 3x4 GB or 3x2 GB of 1600 MHz RAMs. Now, the problem is even though the Intel's official page mentions 1600 MHz modules compatible with the board, but the shopkeeper says it firmly that DX58SO is NOT COMPATIBLE with 1600 MHz ones, and it is DX58SO2 that I am confusing it with.

Even at the Intel's tested memory page they have not used any 1600 MHz module.

Has anyone else of you faced this trouble? Please guide if the memory I want will work or I'll have to get a new board just for this. Thanks.
The Sorcerer
Jun 21, 2012 at 10:24 PM
I seriously doubt there will be an issue.
sumonpathak
Jun 21, 2012 at 10:29 PM
There will be NO issue...the shopkeeper..lets say...is misinformed :p
hjpotter92
Jun 22, 2012 at 2:06 AM
From 3 to 12 GB RAM it is then. :)

Thanks guys!!
topgear
topgear #5
Jun 22, 2012 at 4:36 AM
^^ the only issue you may face is those 1600 Mhz modules running at a lower speed but there are ways to fix this though ;-)
J
Jripper #6
Jun 22, 2012 at 8:56 PM
ask the shopkeeper to check the official page. that ought to shut him up :p
Darth Vader
Jun 22, 2012 at 9:59 PM
Rules to follow whn buying a PC:

Rule 1: Do your research here before buying PC
Rule 2: Don't ask suggestions from shopkeeper
Rule 3: Don't listen to shopkeeper !!!!
:D
hjpotter92
Jun 23, 2012 at 11:05 AM
^^ the only issue you may face is those 1600 Mhz modules running at a lower speed but there are ways to fix this though ;-)
Let's see. :)

Fingers crossed. Shopkeeper brings it tomorrow.
d6bmg
d6bmg #9
Jun 24, 2012 at 12:28 AM
With your board you can use 1600MHz RAM without any problem. And, yes, shopkeeper is a businessman, not a hardware enthusiast. So knowing everything isn't possible for him.
hjpotter92
Jun 24, 2012 at 2:42 PM
The RAMs came, and I tried using them. When I installed the modules on the board and started the system, the system remains on with no activity. There is nothing displayed on the monitor either. What could be the problem. Under normal circumstances, the system atleast proceeds to BIOS.

I tried installing the sticks separately, one-by-one and all other possible combinations. Still, there is no activity on the display. The LED indicator on the cabinet also shows no response after the first two-three blips.
d6bmg
d6bmg #11
Jun 24, 2012 at 7:50 PM
Which RAM did you buy? Post a link.
hjpotter92
Jun 24, 2012 at 8:15 PM
Which RAM did you buy? Post a link.
It's a ZION 4GB DDR3 PC1600 Dynamic RAM(that's what is written on it). The webpage mentioned is either out-of-date or something. The nearest result I could find regarding zion was this: Zion RAM - CompareZion RAM Price Online India
d6bmg
d6bmg #13
Jun 24, 2012 at 9:33 PM
No such RAM exists or at least google doesn't know.
Or may be its DOA. You should check it in another PC.
The Sorcerer
Jun 24, 2012 at 9:56 PM
What's the spec mentioned on the sticker of the memory stick? 1600MHz 9-9-9-24 @ 1.5v or 1.65v?

Did you try clearing CMOS and then boot? But seriously? Zion?
d6bmg
d6bmg #15
Jun 24, 2012 at 10:13 PM
What's the spec mentioned on the sticker of the memory stick? 1600MHz 9-9-9-24 @ 1.5v or 1.65v?

Did you try clearing CMOS and then boot? But seriously? Zion?

So, ZION practically makes 1600MHz RAM?? :unsure: What do you say?

And, OP bought zion, this fact made me feel just like your post. But in this case
Shopkeeper brings it tomorrow.
part created doubt in my mind about the quality of the RAM.
hjpotter92
Jun 25, 2012 at 3:02 PM
OK, got 2 of them replaced just yesterday. Seems like all 3 were corrupt(some probability :| ). The third one will be replaced within the week. Those two are working fine.

At first, they were @1066 MHz. Clocked them to multiplier 12 and tCL etc to 9. Working fine for now.

Still, I talked to the shopkeeper about unavailability of RAM. He said the same as topgear about Abacus Peripherals manufacturing them.
topgear
topgear #20
Jun 26, 2012 at 3:04 AM
^^ what memory chip is used on the Zion DDr3 ram mdoules - take a closer look at the ram stick - you will find it easily.
hjpotter92
Jun 27, 2012 at 11:59 AM
I could only find two types of chips.

1. C11-G03-1N (1 Nos.)
2. 2DM77-D99FJ (8+8 Nos.)
The Sorcerer
Jun 27, 2012 at 4:59 PM
Why not just order decent enough memory sticks from online?
sumonpathak
Jun 27, 2012 at 5:08 PM
^^my point exactly....