DIGIT-ARC read-only archive · snapshot: July 23, 2026

DIGIT-ARC / Hardware / Hardware Q&A

intial boot fail!!! please help... urgent help needed!!!!

5 posts · originally from https://geek.digit.in/community/threads/intial-boot-fail-please-help-urgent-help-needed.172471/

O
ojas1010 Original post #1
Apr 8, 2013 at 1:15 PM
I just built up my first system
specs: i5 3570k, maximus v gene, 16 gig ddr3(4 sticks), dvd rw, 1tb hdd, cooler master silent pro 1050 watts:
so I installed everything in antec 1200 and after power up only mobo lights are on nothing is on:
*i47.tinypic.com/1gpysh.jpg

I hsvr indtslled sll power connectors.

so please suggest what to do!!!! I m desperate to use my new pc.... please help
(I don't want any comments about hardware why I chose expensive things etc
harshilsharma63
harshilsharma63 #2
Apr 8, 2013 at 8:09 PM
I had the same problem with CX430V PSU. It came out to be a PSU fault.
O
ojas1010 #3
Apr 8, 2013 at 11:50 PM
ok i have got it i dint connect 24 pin connector correctly...but now i get system agent initialization failure
Myth
Myth #4
Apr 9, 2013 at 12:07 AM
Double checked all power connections ? gpu connectors ?
I think system agent has the gpu(s) settings under it. Tried resetting the bios ?
O
ojas1010 #5
Apr 11, 2013 at 3:00 AM
Myth said:
Double checked all power connections ? gpu connectors ?
I think system agent has the gpu(s) settings under it. Tried resetting the bios ?
Click to expand...



thankx for reply the monitor connector was loose....the system is on nad running in full swing
mods pls close this thread