DIGIT-ARC read-only archive · snapshot: July 23, 2026

Long Beep No Display

10 posts · originally from https://geek.digit.in/community/threads/long-beep-no-display.182104/

vidhubhushan
vidhubhushan Original post #1
Mar 18, 2014 at 4:05 PM
i have one old PC. was lying just like that. Thought of using it as music player.

specs are -
Pentium 3 1GHZ
Mercury 815fsx MB
384 MB Ram
40GB PATA HDD
Sony CD Writer
Mercury Cabinet with 250W PSU

When i tried to start, i heard a small burst sound and then it started beeping with no display.

i removed RAM and all connectors except keyboard, mouse and cpu. tried but it is beeping continuously with no display.

CPU Fan is running.

Red LED Light on motherboard is glowing.

what is it?
Desmond
Desmond #2
Mar 18, 2014 at 4:42 PM
What bios does your motherboard use? Award or AMI?

Usually long beeps could mean video card/adapter failure. It varies bios to bios, therefore I am not completely sure.

How many times does it beep?

- - - Updated - - -

I read the manual of your motherboard

It says that the LED means your system is powered.
Flash
Flash #3
Mar 18, 2014 at 5:31 PM
If your mobo has dual slots for RAM, try using the RAM in other.
Also check for the PSU.
vidhubhushan
Mar 18, 2014 at 5:53 PM
once its bios chip went kaput so vendor put phoenix bios chip in it. after that it worked fine.

now it is a long continuous beep without stopping. and this continues even when only cpu, keyboard, mouse (both of my current system) and monitor cable (to the integrated graphics port) are connected

What bios does your motherboard use? Award or AMI?

Usually long beeps could mean video card/adapter failure. It varies bios to bios, therefore I am not completely sure.

How many times does it beep?

- - - Updated - - -

I read the manual of your motherboard

It says that the LED means your system is powered.

- - - Updated - - -

If your mobo has dual slots for RAM, try using the RAM in other.
Also check for the PSU.

it has 3 slots for ram. all used. taken out all of them then too it beeps.
Desmond
Desmond #5
Mar 18, 2014 at 6:03 PM
According to this : PhoenixBIOS Beep Codes

It says that you might need to re-seat the CPU. Try that and see if it gets resolved.
vidhubhushan
Mar 18, 2014 at 6:23 PM
ok, will try that friend. tyvm for the help

According to this : PhoenixBIOS Beep Codes

It says that you might need to re-seat the CPU. Try that and see if it gets resolved.
Moy
Moy #7
Mar 19, 2014 at 8:02 PM
Check the HDD too, one of my relatives had almost same problem, later we found the HDD was creating the problem.
topgear
topgear #8
Mar 20, 2014 at 5:16 AM
i have one old PC. was lying just like that. Thought of using it as music player.

specs are -
Pentium 3 1GHZ
Mercury 815fsx MB
384 MB Ram
40GB PATA HDD
Sony CD Writer
Mercury Cabinet with 250W PSU

When i tried to start, i heard a small burst sound and then it started beeping with no display.

i removed RAM and all connectors except keyboard, mouse and cpu. tried but it is beeping continuously with no display.

CPU Fan is running.

Red LED Light on motherboard is glowing.

what is it?

I'm suspecting the PSU.
vidhubhushan
Mar 20, 2014 at 9:08 AM
Check the HDD too, one of my relatives had almost same problem, later we found the HDD was creating the problem.

problem is without hdd also so that is ruled out.

- - - Updated - - -

I'm suspecting the PSU.

will check that using my current pc's 400w psu. tyvm friend
topgear
topgear #10
Mar 21, 2014 at 3:18 AM
If the PSU already has not damaged any of the components like mobo / cpu or worse it could be even a display adapter / chipset fault.