DIGIT-ARC read-only archive · snapshot: July 23, 2026

Mandrake 10.1 install: No CDROM!!

8 posts · originally from https://geek.digit.in/community/threads/mandrake-10-1-install-no-cdrom.36594/

D
Dumbledore Original post #1
Sep 17, 2006 at 12:38 AM
Here is my problem:

I previously installed Mandrake 10.1 from Digit DVD (using 3 CD's) to my 40GB ATA Hard disk. It worked fine. Then, I upgraded to 160GB Seagate SATA and I tried to install Linux. It booted from the CD, but an error pops up telling that no CD-ROM is present even though I booted from it!! I don't have a floppy drive, please help me.
praka123
Oct 21, 2006 at 4:03 PM
In BIOS perhaps u can set someting correctly (i dont remember) as i do face same problem ended up changing BIOS options.
Also to be considered is ur ide drive connection whether is it primary or secondary.
i'll do a reboot and tell u my bios change i made ;)
And last a vary rare chance of not detecting...
some times during boot for scsi, "ide=scsi" option does help..
D
Oct 24, 2006 at 7:37 AM
I have SATA Drive. How can it have primary and secondary master or slave? In IDE only there is option for master or slave because you can connect two drives in at once. But in SATA only one drive per cable can be connected. I have the same problem with Suse 9.2 also. It worked on my IDE hard disk. I set my BIOS to factory settings but it did not work. Maybe Linux does not support SATA.
R
red_hat #4
Oct 24, 2006 at 8:23 AM
Dumbledore said:
Maybe Linux does not support SATA.

Dude past days gone when it was a headache regarding hardware detection ,Now a days nearly all latest distros support SATA.
Myself using Sata Hdd and have installed distro like Ubuntu ,RHEL ,FC5 but never faced any prob. of any detection,

btw your cdrom is not detecting ,Cdrom connects to IDE so it seems no prob. with sata.
Check out bios settings and reconnect ide cable.
praka123
Oct 24, 2006 at 9:00 PM
check ur bios again yaar.it's very tricky for me to find the option with drives in my gigabyte bios.100% sure mandriva/ubuntu or debian can support most sata interfaces with Linux-2.6 kernel.
gary4gar
Oct 24, 2006 at 11:12 PM
prakash kerala said:
check ur bios again yaar.it's very tricky for me to find the option with drives in my gigabyte bios.100% sure mandriva/ubuntu or debian can support most sata interfaces with Linux-2.6 kernel.
ya they do support!
me tried sata on ubuntu,fedora core 5 & mandrake 10.1

alternatily u can choose the 'load optimised defaults' option & save all & reboot
then post back
sourav
sourav #7
Oct 24, 2006 at 11:20 PM
can't we install mandrake fom hard disk
eddie
eddie #8
Oct 25, 2006 at 2:07 AM
sourav said:
can't we install mandrake fom hard disk
*qa.mandriva.com/twiki/bin/view/Main/CookerHowTo#Via_Hard_Disk_Install_from_ISO_i
Even though the instructions are for Cooker...they should work for official releases as well.