Credit goes to krishnandu.sarkar
Steps for Flashing CUSTOM RECOVERY + CUSTOM ROM + SCRIPTS
Disclaimer: I am in no way responsible if you damage, ruin, brick, etc. your device if you flash any of the unofficial firmware, updates, patches and mods.
Read The Instructions Carefully Before Proceeding. You can always ask if the steps are not clear instead of proceeding with your guess.
Flashing Stuff may void your warranty. I or TDF is no way responsible for that. Think before proceeding.
Though you may flash back original firmware if at any point of time you need to claim warranty, but at your own risk. So this statement is not at all official
Ok, so let us begin...!!
Here are the steps that we'll follow...
1.
Install Custom Recovery
2.
Backup Stock ROM / Present ROM
3.
Flash Custom ROM [IMG File]
4.
Install Scripts
5.
Modding your ROM with Allwinner Mod
6.
Flash Custom ROM [Flashable ZIP File]
Source : IVIEW 760TPC (a.k.a. Ployer Momo9) Firmware & ROM Releases
Detailed Youtube Video Tutorial : IVIEW 760TPC Advanced Improvements - Flashing Firmware, Custom Scripts & more - YouTube
XDA Thread : [Q] Micromax Fun Book Development? - xda-developers
Android Forums Section : Micromax FunBook - Android Forums
Those who are new to this Android and Flashing thing, I'd recommend to read [READ FIRST] [REF] Dictionary for n00b - What is.../What does ...mean? (2011/01/17) - xda-developers to understand the terms / jargon's.
INSTALLING CUSTOM RECOVERY
1. Download CWM Recovery 5 ICS.zip
2. Extract it.
These are the requirements fo Flash CWM...
- tablet must be running Android ICS version (4.0.x)
- tablet must have Superuser installed with SU binary loaded
- tablet must have Debugging enabled (ADB drivers included)
Your Funbook is Pre-Rooted, so we'll just proceed with installing Superuser App from Market
3. Go to Play Store and download Superuser.
4. Go to Superuser App > Settings > Su Binary > Install the Binary
5. Reboot.
Now we'll enable USB Debugging
6. Go to Settings > Developer Options > Turn On USB Debugging.
Now we'll increase the screen timeout to prevent screen from getting turned off in the middle of these procedures
7. Go to Settings > Display > Select Never at Sleep.
8. So now connect the USB Cable to your PC and Funbook and you should see
USB Debugging Connected notification.
At this point, if this is your first time, you may see Windows trying to find Drivers which will fail ofcourse. Go to Device Management [Press Windows Key + R > Type devmgmt.msc] > Right Click on Unknown Devices > Update Driver Software > Browse My Computer for Driver Software > Both 64bit [Drivers-AllwinnerA10-64bits] and 32bit [Drivers-AllwinnerA10-32bits] Drivers are provided there within a folder named ADB_Drivers under the Recovery Package, so just browse them according to your OS Specification. A screen may appear up saying "The Publisher of this Driver could not be verified", just ignore that and "Continue Anyway".
9.
DO NOT TURN ON USB STORAGE. LEAVE IT AS IT IS.
Time to install CWM. There are two methods. One is easy, by running a script and another is using ADB by typing commands. You'll get an _Instructions.txt there which lists both the methods in case you want to try out the 2nd method. Here I'll only cover the easy one i.e. using Script.
10. Run recovery-install.bat [Windows] / recovery-install.sh [Linux] and press any key and just wait and watch the show
11. Within few mins recovery will be installed.
To reboot in Recovery Mode -> Press Options Key and by keeping it pressed, Press Power Key. Release Power Key and then Release Options Key.
12. Reboot.
Code:
=======================================================
| How to control ClockworkMod Recovery 5 |
| |
| VOL+: up |
| VOL-: down |
| POWER: select |
| BACK: back |
=======================================================
Credit goes to tkin
HAVING PROBLEM WHILE INSTALLING CWM?? GETTING PERMISSION DENIED ERROR??
Ok, for those who cannot install CWM from the normal steps(most probably new funbook users having Base 1.2 and ICS 4.0.3) follow these steps.
1. Install Superuser from playstore, update binary, you'll notice it will fail one part(red text), re do the update 2,3 times staright away until all the text become green, no need to reboot phone, but you might want to.
2. Install Android terminal from playstore, in terminal put su and press enter, if you get a warning allow it, if # comes you have root access. If not, re do step one. Don't continue till you get this step correct.
3. Download ES File manager from playstore, go to settings, allow all root access related options and also tick go upto root option.
4. Now start ES file manager, go to root, long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steaps for nandg file.
5. Allow USB debugging from dev options, connect the cable, install drvers.
6. Run the ICS recovery script, wait for it to finish, if it fails then you need to check and set permission again, if all goes well you have successfully installed CWM.
Warning: When setting permissions in ES File Manager make sure the USB cable is not attached, if so it might cause a hard crash and brick the device.
I had used this method to flash CWM on mine and on my friends device, both Base 1.2 and ICS 4.0.3(made in may 2012, the rom build no is: 97F1-D1-H2-H01-MMX.20120512) hence I think funbooks made after may 2012 must use this method, otherwise the script will fails due to permission denial.