DIGIT-ARC read-only archive · snapshot: July 23, 2026

My system Tempratures in ubuntu, are they normal??

10 posts · originally from https://geek.digit.in/community/threads/my-system-tempratures-in-ubuntu-are-they-normal.61242/

gary4gar
gary4gar Original post #1
Jun 24, 2007 at 8:17 PM
gaurish@gaurish-desktop:~$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+38°C

w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.15 V (min = +0.70 V, max = +1.87 V)
+12V: +11.98 V (min = +2.37 V, max = +5.23 V) ALARM
+3.3V: +3.33 V (min = +1.25 V, max = +1.07 V) ALARM
+5V: +5.07 V (min = +3.44 V, max = +0.77 V) ALARM
-12V: -11.78 V (min = -3.40 V, max = -14.91 V) ALARM
V5SB: +5.03 V (min = +1.16 V, max = +4.68 V) ALARM
VBat: +3.58 V (min = +3.38 V, max = +1.02 V) ALARM
fan1: 0 RPM (min = 4655 RPM, div = 2) ALARM
CPU Fan: 5357 RPM (min = 675000 RPM, div = 2) ALARM
fan3: 0 RPM (min = 6553 RPM, div = 2) ALARM
M/B Temp: +45°C (high = +16°C, hyst = +0°C) sensor = thermistor ALARM
CPU Temp: +39.0°C (high = +60°C, hyst = +55°C) sensor = thermistor
temp3: +66.0°C (high = +60°C, hyst = +55°C) sensor = thermistor ALARM
vid: +0.000 V (VRM Version 2.4)
alarms:
beep_enable:
Sound alarm enabled


there is ALARM in many of the indicators, is this info it correct?
eddie
eddie #2
Jun 24, 2007 at 8:32 PM
Your system is running at 38°C. Is that too much or too less for you? Why are you worried? :confused:
gary4gar
Jun 24, 2007 at 11:35 PM
i am worried because seeing the word "ALARM " many times
and if any one point to a page where i can know what are these indicators like VCore,V5SB,VBat
kalpik
kalpik #4
Jun 25, 2007 at 1:07 AM
The alarms are set wrong :)
Anindya
Anindya #5
Jun 25, 2007 at 10:55 AM
Plz tell me what r the temp range for all the parts inside the cpu? Also do give a software link which is reliable for all these. Thanks.
eddie
eddie #6
Jun 25, 2007 at 12:19 PM
gary4gar said:
i am worried because seeing the word "ALARM " many times
Your ranges are set wrong. You can configure them in sensors.conf file.
gary4gar
Jun 25, 2007 at 2:01 PM
what will be the correct ranges???
a complete reference page is helpful
QwertyManiac
Jun 25, 2007 at 2:19 PM
I don't know of correct ranges, I guess thats mostly hardware dependent as long as they're fans.

But look at this:
CPU Fan: 5357 RPM (min = 675000 RPM, div = 2) ALARM

That's a good example of your incorrect values.
gary4gar
Jun 25, 2007 at 2:26 PM
QwertyManiac said:
I don't know of correct ranges, I guess thats mostly hardware dependent as long as they're fans.

But look at this:
CPU Fan: 5357 RPM (min = 675000 RPM, div = 2) ALARM

That's a good example of your incorrect values.
yup i think the default values are wrong itself, i need to change them
anybody has a idea what paramaters i should use?
config
amd athlon 64 3000+
msi-k8mm-v(via k8m800 chipset)
praka123
praka123 #10
Jun 25, 2007 at 2:33 PM
did u apt-get install sensors-applet or hardware-monitor? I think they offers adjust alarm level etc.