DIGIT-ARC read-only archive · snapshot: July 23, 2026
B
Bodhisatwa Original post #1
Apr 22, 2012 at 5:02 PM
I have a starlite gold 4gb ddr3 1333 ram..amd athlon x2 260 3.2ghz processor..gigabyte ga-ma78lmt-s2p mobo... i want to buy a 4gb ddr3 1333 ram within rs. 1200...and sell the starlite ram..its just 5 months old..my purpose is mainly gaming..so which ram should i go for?
thetechfreak
Apr 22, 2012 at 5:11 PM
Flipkart: Kingston ValueRAM DDR3 4 GB PC RAM (KVR1333D3N9/4G): Ram
or these if you can increase budget
Flipkart: Corsair Vengeance DDR3 4 GB (1 x 4 GB) PC RAM (CMZ4GX3M1A1600C9): Ram
B
Apr 22, 2012 at 5:16 PM
but the corsair one is 1600 mhz
Cilus
Cilus #4
Apr 22, 2012 at 8:45 PM
^^ That's why thetechfreak suggested it. gigabyte ga-ma78lmt-s2p supports 1600 MHz Ram.

Howevr, my suggestion is G-skill RipjawX 1600 MHz 4GB module @ 1.55K. This one is slightly better than Vengeance and can run on much tighter latency setting. (Less the latency, better the performance and AMD processors are much responsive to lower latency than higher speed.)
GSKILL Ripjaws Series 4GB Single Stick 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9S-4GBRL
B
Apr 22, 2012 at 10:30 PM
my shopkeeper told that it does nt support 1600mhz ram... pls give a link for that..
Cilus
Cilus #6
Apr 22, 2012 at 10:56 PM
There is no such link...

Listen carefully: By default all the AM3 motherboards support 1333 MHz Speed. So if you plug a Ram with higher frequency then it will be down-clocked to 1333 MHz. So you need to go to the BIOS first and under the section where the advanced settings like CPU Multiplier, Memory settings (probably MB Tweak) etc, you'll find an option called Memory Multiplier. Set it 4 and save the BIOS. Now your Ram will run at 1600 MHz processor.
B
Apr 22, 2012 at 11:01 PM
the shopkeepers ..you know;)...btw the ram will then work same as 1600mhz??
Cilus
Cilus #8
Apr 22, 2012 at 11:08 PM
Yes. It will.
B
May 8, 2012 at 7:21 AM
I wil sel my curnt ram to a frnd..wil buy a new one..purpose gaming..wil go for vengeance or ripjaws x..as per availability..
Thanks :)..
skeletor
skeletor #10
May 9, 2012 at 1:24 AM
Closing the thread.