DIGIT-ARC read-only archive · snapshot: July 23, 2026

Need Help: Can video memory be increased?

23 posts · originally from https://geek.digit.in/community/threads/need-help-can-video-memory-be-increased.150592/

Skynaveen
Skynaveen Original post #1
Dec 28, 2011 at 4:54 PM
I have a Nvidia GT 220 from XFX which has ddr2 memory(1gb). The memory speed looks like its only 400Mhz (It says so in afterburner). :razz:

I was wondering if i could somehow replace the memory or make it not use the memory but instead use my ram which is 800Mhz:mrgreen:

Please help me in this regard.
Thanks in Advance :-o



.
CA50
CA50 #2
Dec 28, 2011 at 5:02 PM
^ LOL dude that is impossible, but you can overclock the GPU memory to run at higher speed.

Remember Overclocking increases heat, so check that before hand
Skynaveen
Dec 28, 2011 at 5:16 PM
I already overclocked it - check this
*www.thinkdigit.com/forum/overclocking-show-off/150490-gt-220-overclocked-625-mhz-815mhz.html

BTW Thanks for the fast response
Thought so... that it was impossible

Thanks

.

But Maybe there is some way which is really complicated or something ....
So I am open to any more suggestions (maybe a bios change ...)

.:razz::razz::razz::shock::razz::razz::razz:
thetechfreak
Dec 28, 2011 at 6:35 PM
:lol:
if a graphic card would use RAM then they would be dead and you would have never used it
In short no.
CA50
CA50 #5
Dec 28, 2011 at 7:14 PM
@Skynaveen, a GPU is designed to use the dedicated ram in the PCB itself.

Moreover using system will increase communication time between the graphic processor and the RAM. Not to mention you will have to share your precious RAM :D
Skynaveen
Dec 28, 2011 at 9:09 PM
Oh well .................. thank you all very much.
d6bmg
d6bmg #7
Dec 28, 2011 at 9:29 PM
Moreover using system will increase communication time between the graphic processor and the RAM. Not to mention you will have to share your precious RAM :D

Sadly it is not much of use. As that shared memory only works for the Graphics associated with processor (if it has any).
CA50
CA50 #8
Dec 28, 2011 at 10:37 PM
^ ya mate , thats what i meant
Skynaveen
Dec 28, 2011 at 11:17 PM
But if you don't have a graphics card, You can use a program to allocate some of your ram as video memory

So this also might be possible........Maybe not now but some day it will be possible I guess...............

And thanks everybody for the fast responses



.
topgear
topgear #10
Dec 29, 2011 at 5:50 AM
^^ If you don't have a gfx card but do have a mobo with built in IGP you can share upto 512/1GB system mem as vram using only the bios/EFI setting - no extra software needed to achieve this ;-)
Zangetsu
Zangetsu #11
Dec 29, 2011 at 9:34 AM
Clock Speed can be increased but not Video Memory(RAM)....
Skynaveen
Skynaveen #12
Dec 29, 2011 at 2:01 PM
Thanks Everybody
coderunknown
Dec 30, 2011 at 12:40 AM
^^ If you don't have a gfx card but do have a mobo with built in IGP you can share upto 512/1GB system mem as vram using only the bios/EFI setting - no extra software needed to achieve this ;-)

i think there is a way of dedicating some ram to graphics memory so total graphics memory will increase. i have really forgotten the term. will google & post.
topgear
topgear #14
Dec 30, 2011 at 5:22 AM
^^ It's called Nvidia TurboCache or ATI HyperMemory

The GPU must have support for this feature - the gpu will then use system memory as a substitute to the dedicated physical memory of the gfx card

Say a gpu has 256MB physical memory with TurboCache/HyperMemory - the card supports upto 512MB - now because of TC/HM tech 256MB of the system memory will be allocated as the gpu memory to make the the 512MB vram buffer ;-)
CA50
CA50 #15
Dec 30, 2011 at 11:04 AM
Nvidia TurboCache is found in older card, i doubt the 220 will support that feature
Skynaveen
Skynaveen #16
Dec 30, 2011 at 12:42 PM
Thanks, I checked out Nvidia turbocache. I dont think my card would support it....
topgear
topgear #17
Dec 31, 2011 at 5:27 AM
^^ Read my reply ;-)

Nvidia TurboCache is found in older card, i doubt the 220 will support that feature

Low end gfx cards like GT220 indeed supports TC feature but whether a GT220 gfx card will have TC feature or not depends on the manufacturer;-)

For example :

GIGABYTE - Graphics Card - NVIDIA - PCI Express Solution - GeForce 200 Series - GV-N220TC-1GI

This gfx card has 512MB dedicated memory but with TC it can boost the memory amount upto 1GB ;-)
mithun_mrg
Dec 31, 2011 at 9:04 AM
^^but i really doubt low end cards will be benefited by this feature
Skynaveen
Skynaveen #19
Dec 31, 2011 at 11:22 AM
So..... will it work on XFX GT220 1gb DDR2
Can I increase the memory to 1.5gb or 2gb.
I have enough ram to spare.

If so do I need any other software for it.
mithun_mrg
Dec 31, 2011 at 11:38 AM
^^ the process is automatic if the manufacturer has enabled it but i think the effect on the performance will be negative

also ur gpu is not powerful enough to utilize that much amount of memory
CA50
CA50 #21
Dec 31, 2011 at 3:32 PM
@Skynaveen, you can refer to the product manual or the technical details of the GPU to check if TC is indeed supported :)
coderunknown
Jan 1, 2012 at 3:01 AM
^^ It's called Nvidia TurboCache or ATI HyperMemory

The GPU must have support for this feature - the gpu will then use system memory as a substitute to the dedicated physical memory of the gfx card

Say a gpu has 256MB physical memory with TurboCache/HyperMemory - the card supports upto 512MB - now because of TC/HM tech 256MB of the system memory will be allocated as the gpu memory to make the the 512MB vram buffer ;-)

thanks for the info :razz:

^^but i really doubt low end cards will be benefited by this feature

if graphics memory is DDR2, so dedicating some DDR3 memory from ram may help. sad an increase of 2-3FPS. but i feel the dedicated memory will run at clock of the graphics memory (i.e. low speed) hence make it almost meaningless.
topgear
topgear #23
Jan 1, 2012 at 4:27 AM
So..... will it work on XFX GT220 1gb DDR2
Can I increase the memory to 1.5gb or 2gb.
I have enough ram to spare.

If so do I need any other software for it.

check the manufacturer website for that info.

You don't need any 3rd party app - the gpu driver will handle this if your gfx card supports TC feature ;-)