DIGIT-ARC read-only archive · snapshot: July 23, 2026
Revolution
Revolution Original post #1
Sep 13, 2012 at 7:58 AM
Hi guys,
Some one gave me 5 year old Intel Dual Core CPU+G41 Mobo+2GB DDR2 RAM.
Now I'm thinking to make this as HTPC or may be for Downloading & Browsing machine.
I already have an old iBall case(rust on some parts & got no fan,only a place for 120mm fan at rear) and a Zebronic PSU.
When I install 3 component with PSU in that case and run.
Saw temp at BIOS was 55°C and CPU fan speed was near 2,000RPM.
I don't want to spend too much on this.
What should I do ? :-?
N
Naxal #2
Sep 13, 2012 at 11:13 AM
When I install 3 component with PSU in that case and run.
Saw temp at BIOS was 55°C and CPU fan speed was near 2,000RPM.

Sorry but is that a problem ?? 55c with intel stock cooler in moderate load is not a big deal, or is it ??
A
akky89 #3
Sep 13, 2012 at 3:32 PM
Hi guys,
Some one gave me 5 year old Intel Dual Core CPU+G41 Mobo+2GB DDR2 RAM.
Now I'm thinking to make this as HTPC or may be for Downloading & Browsing machine.
I already have an old iBall case(rust on some parts & got no fan,only a place for 120mm fan at rear) and a Zebronic PSU.
When I install 3 component with PSU in that case and run.
Saw temp at BIOS was 55°C and CPU fan speed was near 2,000RPM.
I don't want to spend too much on this.
What should I do ? :-?

IMO try to clean the heatsink and anyother fan in the chassis and buy TIM paste ....
i think that should solve the problem...
Revolution
Sep 14, 2012 at 7:47 AM
Sorry but is that a problem ?? 55c with intel stock cooler in moderate load is not a big deal, or is it ??

That's what I want to know ?
What's the normal temp should be for Intel E4500 with stalk cooler ?
Is there any cheap TIM available ?
Average price 500/- not less. :(
I need tiny amount of paste only for one CPU.
Revolution
Sep 20, 2012 at 7:43 AM
Any cheap Thermal Paste & Paste Remover Liquid available in market ?
Or,anyone want to sell his/her excess Thermal Paste & Paste Remover ?
I'm from Kolkata.
A
acewin #6
Sep 20, 2012 at 9:06 AM
they are cheap only. :D. Check if anyone has bought it, as it would be better
Revolution
Sep 21, 2012 at 6:31 AM
Cheap ?
May be not for me. :(
Thermal Paste & Liquid Remover will cost near 1K I guess.
Which cheap one u taking about BTW ?
A
acewin #8
Sep 21, 2012 at 8:44 AM
Buy Arctic Silver | Arctic Silver 5 Thermal Compound

do not know about liquid remover. But I knew they(thermal compound) come in 300 bucks. even 600 is little too much

ok got few of them here
*techshop.in/store/index.php?cPath=320_243_323
Revolution
Sep 22, 2012 at 7:25 AM
Rs.600/- for 15 to 25 CPUs is good.
But,I can't so much for just one CPU. :(
Neo
Neo #10
Sep 22, 2012 at 8:56 AM
I had got TIM for Rs 40 from a local retailer, and it is working fine. ;)
Also 55C is absolutely perfect for that configuration.
J
Jripper #11
Sep 22, 2012 at 9:01 AM
You can try out the coller master thermal fusion 400 :) After unlocking my proccy it too ran at a high temperature. I applied the CM thermal fusion 400 and temps went down to 36-40. Nowadays with the new cabby, temps are 29 degrees on idle :D

It costs just 500 bucks