Net on Linux !!!

You need to set up your lan card and give it the correct IP address. However, my knowledge on CableNet is v. limited and so I may be wrong.

But because you are using Knoppix directly off the CD, you need to do this correctly everytime you boot. If you install it on your hard disk, you need to do this only once.

hey harish.. u use windows too right?

ok do this thing..

right click on ur local area connection in network connections

click on properties... now click on "internet protocol(tcp/ip) here u will get ur ip address/gateway and dns(the gateway and dns servers are same for hathway) and ur subnet mask

now go to knoppix.. and here click on the net connection wizard...

it will ask for "broadcast using DHCP".. select no..

then enter ur ip adress and other stuff!

and voila! u r connected!

then just wanted to inquire which client u use for connction to hathway eg- cyberoam... coz IF u use a client to connect.. u wud need the linux verson of these clients too

for eg if u use cyberoam
do this:

extract the 'crclient' client from the .tar.gz archive and place it in /root folder... or if u r using a live cd.. put it in ur windows drive in linux ur c:'s path will be /disks/hda1

suppose u put this file here /disks/hda1/crclient

now in console enter "cd /disks/hda1/"

then "./crclient -s"

then it will ask for ur server address

now enter "./crclient -u"
it will ask for ur user/pass and voila u r on da net!

BTW, I have a similar question, I have a sify cable net connection, and a DAVICOM Lan card. The card comes with driver, but i it required for the card to function? Or can I just configure IP address and DNS settings etc.

Thanks

Hey

ANDY


my net started on LINUX
ur first thing was enough ... i use the given MOZILLA and Konqueror to browse the net ... VOILA ... must say LINUX rulz and DIGIT too...

coz without DIGIT i wud hav never got this solution !!!

as my engineer is an ANTI - TESTER kinda person ... he doesnt try new stuff ... still using WIN 98 SE !!

doesnt allow me to use nethin better

and any problems ... asks me to format ma C Drive :roll:


thnx others also who tried to answer ...

ujjwal said:

The card comes with driver, but i it required for the card to function? Or can I just configure IP address and DNS settings etc.

Click to expand...

Hello Ujjwal bhai, Special drivers are required for special functions of special cards... generic drivers can also run your generic card.... and all special cards can work in generic mode... just do a # netcardconfig

Re: Thanks

talrejaharish said:

VOILA ... must say LINUX rulz and DIGIT too...

Click to expand...

Give some credit to GNU project also... 95% of program in your GNU/Linux system is a derivative of the GNU Project... Linux is just a kernel and makes up that 5% ...

talrejaharish said:

as my engineer is an ANTI - TESTER kinda person ... he doesnt try new stuff ... still using WIN 98 SE !!

Click to expand...

You know what ? we call these kind of admins as Next > Next > Next > Finish kind of administrators... because half of the time they do Next > Next > Finish...

or start|programs type of ppl as i define them

hmmm...

GNUrag said:

You know what ? we call these kind of admins as Next > Next > Next > Finish kind of administrators... because half of the time they do Next > Next > Finish...

Click to expand...

Very funny.

BTW, here in this thread I second you on the credit that GNU deserves. Hats off to FSF and Richard Stallman.

BTW, I just had a look at Gnoppix 0.8 and man!! It looks really good!! It rocks!!

I love Gnome and yes.. Gnoppix Rocks....

rite

Hey ... all of ull r correct ... specially

GNUrag wrote:
You know what ? we call these kind of admins as Next > Next > Next > Finish kind of administrators... because half of the time they do Next > Next > Finish...

Click to expand...

but cant help it na ... have to keep one engineer for those ODD hours ...

and also ... yea GNU project gets full credit ...
dint know LINUX and GNU project was different or sumthin ...

anyways ... think gotto read up on LINUX ...

hey BTW ... i wanna know how is SUSE 9.1 .... any users ????

Lol ... I like that (Next>Next>Finish), its so true ...

Thanks GNURag

Re: rite

talrejaharish said:

and also ... yea GNU project gets full credit ...
dint know LINUX and GNU project was different or sumthin ...
anyways ... think gotto read up on LINUX ...

Click to expand...

You might want to read that book of Essays by Richard Stallman (GNU project founder) on Free Software and GNU Project... tuxfan has taken a xerox copy of it from me... you're in GNUmbai too, maybe you might be interested in reading it... will bring it on next LUG meet at IIT if you want it!

I am recommending the following book :

Free as in Freedom: Richard Stallman's Crusade for Free Software, by Sam Williams

d/l the ebook: *gutenberg.net/dirs/etext04/freed10.txt

tuxfan has taken a xerox copy of it from me

Click to expand...

And read half of it so far Work in progress. I am on the verge of being impressed by it.

Ok. I have finished reading it.