DIGIT-ARC read-only archive · snapshot: July 23, 2026

DIGIT-ARC / Hardware / Hardware Q&A

No Display !!!!

7 posts · originally from https://geek.digit.in/community/threads/no-display.175110/

B
bludash Original post #1
Jun 22, 2013 at 8:51 PM
Hi
I was able to use the system without any problem till last night. Today morning when I started my pc the display wont come up, the monitor just flashes the amber light. The POST beep is heard but I feel there is a delay as compared to the normal times. I can hear the start up sound as well. The config is in the sig ( Rig 1 ) and I am using a Beetle UPS.:cry: any suggestions would be welcome I will be trying that once I reach home as in office right now
avichandana20000
avichandana20000 #2
Jun 22, 2013 at 10:25 PM
the problem lies in which RIG?

ACTUALLY THIS KIND OF PROBLEM CAN BE BETTER DIAGNOSED WITH A TRIAL & ERROR METHOD. SO BETTER IF YOU CAN CHANGE PARTS ONE BY ONE WITH ANY OF YOUR FRIEND'S COMPUTER PARTS.
B
bludash #3
Jun 22, 2013 at 11:53 PM
The config is in the sig ( Rig 1 )
Click to expand...

I will try that but how does this happen suddenly....
topgear
topgear #4
Jun 23, 2013 at 5:13 AM
check the gpu and ram .. remove, clear both component and slot and remount - if possible try with different ram and gpu.

BTW, you are hiving issue with which rig ?
TheHumanBot
TheHumanBot #5
Jun 23, 2013 at 10:54 AM
RAM problem as above said, remove RAM and put it back and it will work. magic.
B
bludash #6
Jun 23, 2013 at 7:14 PM
Re: No Display....(Solved)

Thanks ppl for all your responses I removed the RAM and Graphics card cleaned the pins with a eraser and installed them back....and voila it did the job....problem solved

@ Topgear
BTW, you are hiving issue with which rig ?
Click to expand...
the problem was with the RIG 1 in the siggi....I did quote that in the first post :!:
topgear
topgear #7
Jun 24, 2013 at 3:31 AM
I missed that somehow .. anyway. good to know your issue has been solved.