DIGIT-ARC read-only archive · snapshot: July 23, 2026

no signal on monitor

22 posts · originally from https://geek.digit.in/community/threads/no-signal-on-monitor.136401/

sanoob.tv
sanoob.tv Original post #1
Jan 28, 2011 at 9:33 PM
i was installin windows 7 on my freinds machine,it asked for some drivers in order to continue installation,i went to get my mobo cd,when i returned it was all gone,(blank screen)

i restarted the system,and the monitor displayed "no signal",
in the cpu all the fans are spinning,can hear the sound from hdd and al,but no output

i tried many things,resetting bios by cmos jumper and bios battery,changing rams,etc

the one thing i noticed was,usually the led on the cabinent is blue and red(busy)
bt now its only red

any help on this?
Ishu Gupta
Jan 28, 2011 at 9:42 PM
Sounds obvious but did you check the monitor cable?
Do you have a graphic card?
sanoob.tv
Jan 28, 2011 at 10:24 PM
i checked the cable,it works fine,n i dnt have a graphics card
asingh
asingh #4
Jan 29, 2011 at 12:16 AM
Try to reinstall the OS.
I
Jan 29, 2011 at 12:34 AM
How old is the motherboard?

Usually no-display issue is attributed to a problem either with the motherboard or processor or memory (RAM).

Perhaps i am wrong, thus, kindly await the expertise of other renowned members.
:smile:
thetechfreak
Jan 29, 2011 at 11:50 AM
Properly check connections on the back of CPU
arpanmukherjee1
Jan 29, 2011 at 5:33 PM
these r also related to HDD.

remove HDD and see if bios screen shows up.
thetechfreak
Jan 29, 2011 at 6:57 PM
refit you ram properly,hdd cable
coderunknown
Jan 30, 2011 at 1:50 AM
is the OS legit? i doubt. or were you trying to install from other DVD?

if nothing works, install XP & than upgrade to Win7.
sanoob.tv
sanoob.tv #10
Jan 30, 2011 at 9:10 AM
well i tried all that bt no use
im assuming the problem is with the mobo

today when i turned on the cpu,it worked fine at first,bt suddenly after some time the system turned off again(not shutdown);and now its having the same problem "no signal" on the monitor

is it a virus?or some mobo problems?
thetechfreak
Jan 30, 2011 at 10:51 AM
I think motherboard and overheating problem.
arpanmukherjee1
Jan 30, 2011 at 2:31 PM
^^ possible. clean cabinet and cpu+chipset fins with vaccume
mkgupta64
mkgupta64 #13
Jan 30, 2011 at 7:44 PM
Even Im facing the same problem since quite some time.

Not even able to enter into BIOS.

checked everything except my RAM & CMOS Battery. Cud it be related to either of these two? Is der anyway by which i can check my RAM & battery while it is still installed ? I dnt hv access to other PC which support my DDR 1GB RAM.
sanoob.tv
sanoob.tv #14
Jan 30, 2011 at 8:39 PM
thetechfreak;1327549 begin_of_the_skype_highlighting**************1327549******end_of_the_skype_highlighting said:
I think motherboard and overheating problem.

i hope its the heating problem,

k,i tried to turn on the system before two hours bt it didnt seemed to work,
the power is k,fans spinning,dvd rw working(open and close),

bt the problem is it didnt even show bios screen,nothing comes on the monitor except the"no signal";and only the busy led(red light) on the cabinet is glowing....

k,i tried to turn on the system before two hours bt it didnt seemed to work,
the power is k,fans spinning,dvd rw working(open and close),

bt the problem is it didnt even show bios screen,nothing comes on the monitor except the"no signal";and only the busy led(red light) on the cabinet is glowing....
arpanmukherjee1
Jan 30, 2011 at 8:59 PM
is ur hdd still connected ?

if yes. disconnect it and reboot
d3p
d3p #16
Jan 31, 2011 at 2:24 PM
Try this.
1. Get a new Thermal Compound or Thermal Paste.
2. Remove the Processor & clean the surface of the Heat Sink & processor.
3. Apply Thermal Paste on the Processor & hook up the fan.
4. Check the connections on the MB & if booting properly then go to the BIOS.
5. Check whether the HDD is detected or not.
6. If everything is fine then it the time to change your Power Supply [SMPS].

Check & let us know.
mkgupta64
mkgupta64 #17
Feb 3, 2011 at 9:45 PM
I hv tried Booting without connecting Hard disk also bt the same pblm, motherboard light is ON, CPU front facing indication Green alws on, Red keeps blinking.

Even tried restoring my BIOS, by loading it to a pen drive n then tried booting.. but again, nothing happened.

Any help guys ??
thetechfreak
Feb 3, 2011 at 11:20 PM
monitor cable trouble maybe.properly connect pins.

Use different monitor.
arpanmukherjee1
Feb 3, 2011 at 11:50 PM
go back to basics.

remove everything. only mobo+CPU + GPU only if no IGP

the mobo speaker should generate 4-5 beeps at regular interval

if this happens then put in single ram.

if bios shows up let sytem on for 1-2 min

then put in hdd

if os loads put in GPU.

i do this in case when i dont know which component is causing prob.
mkgupta64
mkgupta64 #20
Feb 6, 2011 at 2:07 PM
Tried the Basics also..

Connected only Mobo + Processor n tried booting. Mobo green light is ON but no sound from internal speaker..

Does it mean, Mobo is out of service??

Anyway, its Intel 865 GBF + P4, a quite old config and no support avl on net either.

Help me guys.
d3p
d3p #21
Feb 6, 2011 at 6:39 PM
Try resetting from the CMOS, I hope it will do the job.
mohityadavx
Feb 6, 2011 at 6:58 PM
try changing the motherboard's bios cell i had same problem few months back and it worked:)):))