Page not opening. · DIGIT-ARC

Good morning Digit expert,i succesfully connect my internet conection through usb(tata indicom),but i open mozilla nd type url nd thern press enter but page not opening.all detail i'm sending .please help me brother.many many thanX 4 my help .

1st my webpage screenshot:-*img296.imageshack.us/img296/2662/screenshotck6.png
2nd my wvdial.conf details:-

[Dialer Defaults]
Modem Type = USB Modem
Phone = #777
Dial Command = ATDT
Init1 = ATZ
Init2 = AT+CRM=1
FlowControl= Hardware (CRTSCTS)
Username = internet
Password = internet
Modem = /dev/ttyACM0
Stupid Mode = 1
Baud = 115200

3rd type wvdial.conf in terminal nd show msg:-

[root@localhost ~]# wvdial
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CRM=1
AT+CRM=1
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Dec 9 07:29:09 2006
--> pid of pppd: 3284
--> Using interface ppp0
--> pppd: t
--> pppd: t
--> pppd: t
--> pppd: t
--> local IP address 59.161.66.40
--> pppd: t
--> remote IP address 172.23.136.38
--> pppd: t
--> primary DNS address 202.54.15.30
--> pppd: t
--> secondary DNS address 202.54.1.30
--> pppd: t

bcoz all details sending reason may be any problem my setting.
please help me brother.
__________
Help me brother.

hmm..

wvdial shows that u r connected.now the network may not be configured correctly.do try below cmd:

Code:

~#route del default
~#route add default ppp0

after committing wvdial.
then try :

Code:

~#ping google.com

also post

Code:

~#/sbin/ifconfig

thanX 4 reply prakash but my problem not solved.
1st :-type in terminal "route del default" no msg.
2nd :-type in terminal "route add default ppp0" no msg.
3rd :-type in terminal "ping google.com" saying "unknown host google.com"

help me prakash

depending on ur distro,u need to run it as either root or use sudo,for eg:in ubuntu use sudo route add de..
and in fedora open a terminal and type in dollar prompt :

Code:

~$su

and give root password and enter.then run those,

read more about using terminal hereL:
*www.brunolinux.com/
*www.chongluo.com/books/rute/

my distro is FC6 nd itried with su command,but saying "unknown host google.com".
example:-
#su (enter)
#route del default (enter)
#route add default ppp0 (enter)
#ping google.com (enter)
ping:unknown host google.com

if i re-install FC6,my problem solved,can i do.
help me brother.

post ur "ifconfig" as su user:
No.reinstalling FC6 is not a soltn!it s not a big think.actually the default network gateway route is not set.thats why afaik.post it

sorry bro 4 disturbed u but i don't know,how can i post ifconfig 2 su user.
please guide me step by step brother.
i really frustrated this problem.

open a terminal,there u see a prompt with "$" sign:

Code:

abc@localhost.localdomain:~$su  (enter)
passwd:                              (here 
give ur root  password,it will not show anything while
 u r typing password,cursor may not move,then press enter
)

after entering passwd,press enter:now u r having the power of root user.a root user is the admin of ur pc or n/w.he can change or do anything with files etc.
now u will get a hash(#) prompt.

Code:

abc@localhost.localdomain:~#route del default  (enter)
abc@localhost.localdomain:~#route add default pppo     (enter)
try webbrowser

then there u enter the commands,given before and try web browser.come on u can simply select that terminal screen with left mouse button pressed,right clik n select copy,paste it into this thread!

hi,i'm alredy working in root nd then go 2 Learner(my account) ,but my internet conection not connect in my learner account nd saying "

-->cannot open /dev/ttyACMO : Device or Resource busy
]-->cannot open /dev/ttyACMO : Device or Resource busy
]-->cannot open /dev/ttyACMO : Device or Resource busy

internet connection connect in root.
[root@localhost ~]#
internet connection not connect in my account(LEARNER)
[learner@localhost ~]$

if i am using ur commands in Learner account but internet connection required in learner account nd i not able connect internet in my account.
i want worked in linux,help me brother i think only u(Prakash) solved my problem.
__________
prakash please help me.please please

D

That is an old problem and here is the solution
Q1. Internet connected successfully but page is not opening.
Ans. fire up following command

Code:

 gedit /etc/resolv.conf

and enter this

Code:

nameserver  208.67.222.222
nameserver 208.67.220.220

Now u will be able to open web page without any problem.

Q2 when ever i try to connect internet i get this error (Device or Resource busy)
Ans: this is the common problem with dialup connection via dial up.
Possible solution.
1. remove usb cable from the port and reinsert it. If that not help than.
2. run following command

Code:

wvdialconf /etc/wvdialconf

it will remap ur usb port to ttyACMO1or 2
and than fire up this command

Code:

wvdial

Q3 connection is taking long time to open any site and some time it doesn’t open any site at all until i disconnect and connect the net again.

Ans this is the common problem in dialup.
possible solution:- open terminal and type this

Code:

ping 202.54.15.30

hit enter any minimize the terminal
------------------------------------------------------------------------
Life is much better in ubuntu. ubuntu automatically update the dns server detail in resolv.conf whenever user dial dialup connection. and ubuntu automatically update the wvdial.conf file with dialup/phone setting whenever user fireup this command
sudo wvdialconf
but on other distro user have to enter following command to update wvdial.conf file
wvdialconf /etc/wvdial.conf
as root
Thanks for reading
Regards,
Dheeraj
----------------------------------
some useful thread
Connecting Airtel Gprs on Fedora 4/5, ubuntu, Redhat, Kubuntu and other distro

Connect To R connect on Linux In just 4 Easy Step

many many thanX Desi-Tek.com u really very good computer expert.
bye bye nd best of luck ur life.