DIGIT-ARC read-only archive · snapshot: July 23, 2026

Phenom II X4 955 BE heating problem.

5 posts · originally from https://geek.digit.in/community/threads/phenom-ii-x4-955-be-heating-problem.136739/

M
max_d Original post #1
Feb 8, 2011 at 8:43 PM
Hi,

I have the following system.
Phenom II X4 955 BE
GA-880GM-UD2H
CORSAIR 450VX
Cooler Master elite 310
2 X 1 120mm Fans (Noctua NF-S12B FLX 120mm fan + preinstalled cooler master 120mm fan)
My room is well ventilated.

I get 51/52 ‘C when my system is idle. If I start watching movies or surf the internet, it goes up to 59/60’c. I don’t play games and I don’t over clock ether. Firstly, let me start by saying that I am not an expert on computer related things, but I have tried my best to narrow down my heating problem. Right now, I can only think of three possible suspects.

Voltage: I know absolutely nothing about this. I am sure you guys will see my CPUID results and let me know if anything is wrong.

*img203.imageshack.us/img203/8279/heatx.th.jpg

Thermal Compound: Initially, I had ordered a GA-880GM motherboard from my dealer, but he gave me some other motherboard. A few days later, a person came by to replace the wrong motherboard, and during the replacement, some of the thermal compound was lost. Do you think this could be the problem?

AMD Stock Fan: ones my stock fan goes above 4500 RPM, It starts making a loud humming sound. I have heard a lot of bad things about this stock fan. I was thinking of getting a new one. Possibly a Cooler Master Hyper TX3. What do you guys think? Do you think this is the right cooler for my processor? BTW my budget is 2k.

Thanks
coderunknown
Feb 9, 2011 at 1:27 AM
actually, the 3 points you mentioned. all are causing the problem i feel.

voltage: a bit high. 1.3V is enough to run the proccy.
thermal gel: makes a difference in temperature. at least keeps temp in control.
fan: Phenom II X4 & X6's HSF isn't well made. they are noisy & doesn't offer best cooling. but usually enough for normal use.

so, go to BIOS & lower VCore to 1.3V & play some heavy game. if PC restart or crashes, increase temp to next higher value. maybe 1.325V

order Arctic silver from ITWares (if not avl locally) & apply a thin layer.

clean HSF if its dirty with dust.

Edit: also turn on Cool & Quite in BIOS.
M
max_d #3
Feb 9, 2011 at 3:00 PM
I enabled cool and quite, and now my system temp has dropped to 42’ c.

Thanks Sam.Shab. You’re the best!:cool: