DIGIT-ARC read-only archive · snapshot: July 23, 2026
S
simarpal_sahni Original post #1
Nov 2, 2010 at 7:36 AM
Hi ,i am planning to build a pc around mid of nov . can you guys suggest me the config around 12-14k i want to use the pc for general purpose only(entertainment/movies), NO games or any high end softwares will be used.

I have already decided to buy following components(not included in budget)
1.benq 22' g2220
2.microsoft-wireless keyboard and mouse 700 series

PLUS.. i am already having 1*1tb wd hard disk, 500 gigs seagate and apc ups.

so please suggest the other components with there price .

Any suggestions would be appreciated . Thanks!
ssb1551
ssb1551 #2
Nov 2, 2010 at 10:41 AM
Since u already hv HDD,Monitor,UPS n Keyboard n Mouse u need CPU+MoBo+RAM+PSU.
Athlon II X2 250 - 3.2k
Gigabyte GA-880GM-UD2H - 4.5k
2GB DDR3 1333MHz - 2.3k
FSP Saga 400W - 2k
any generic cabinet - within 1k
Total should be within 13k.
If u wanna further reduce the cost u can go for Gigabyte GA-MA74GMT-S2 @ 2.7k

If u can't find or dun like to go for FSP u can go for Gigabyte Superb 460W @ 2.1k!!
Jaskanwar Singh
Nov 2, 2010 at 11:03 AM
@ssb,
x3 is cheaper these days. change processor to x3 435 @ 3.5k..2.3k is the price of g.skill rams. kingston at 2.1k will do. the psu is saga II. as gigabyte mobo is in his budget why get that cheap board..also as his budget is 14k, get a better cabby such as elite 310..
S
Nov 2, 2010 at 11:51 AM
@ssb,
x3 is cheaper these days. change processor to x3 435 @ 3.5k..2.3k is the price of g.skill rams. kingston at 2.1k will do. the psu is saga II. as gigabyte mobo is in his budget why get that cheap board..also as his budget is 14k, get a better cabby such as elite 310..

Thank you jaskanwar and ssb for your reply......would amd be better option then intel processors ? please suggest an intel configuration within same price range .... i have seen you suggesting benq 22" g2220 but which lcd/led is recommended under 23-24 inch category ,please mention the price also.
Thanks in advance.
Cilus
Cilus #5
Nov 2, 2010 at 11:56 AM
At your budget, you won't be able to get any Core i3 or Core i5 solution. All you can get is Pentium G series processors which are outperformed by the AMD Athlon II X2 and X3 processors.
So better opt opt for AMD.
S
Nov 2, 2010 at 12:03 PM
At your budget, you won't be able to get any Core i3 or Core i5 solution. All you can get is Pentium G series processors which are outperformed by the AMD Athlon II X2 and X3 processors.
So better opt opt for AMD.

Hi cilus ,i think i will go for AMD Athlon II X3 . one quick question, even if i invest on i3 or i5 it will be of no use as i am NOT into games or any high end softwares..it will be wastage of money ..right?
ssb1551
ssb1551 #7
Nov 2, 2010 at 1:14 PM
@ssb,
x3 is cheaper these days. change processor to x3 435 @ 3.5k..2.3k is the price of g.skill rams. kingston at 2.1k will do. the psu is saga II. as gigabyte mobo is in his budget why get that cheap board..also as his budget is 14k, get a better cabby such as elite 310..

ya even I was thinking of X3 but found X3 445 for 4.5k @ smc so I suggested X2..but later on found X3 435 at theitwares for 3.6k!!
Cilus
Cilus #8
Nov 2, 2010 at 1:23 PM
Hi cilus ,i think i will go for AMD Athlon II X3 . one quick question, even if i invest on i3 or i5 it will be of no use as i am NOT into games or any high end softwares..it will be wastage of money ..right?
Buying core i3 is not wastage of money, it is also a good processor. But ya, since you are not in games, the price is not justified.
And don't think Athlon II X3 is slower or something, it is also very good in performance in applications and games.
coderunknown
Nov 2, 2010 at 1:41 PM
^^ :agreed: i3 is really VFM processor but unfortunately not the motherboards. selling out 4.5-5.5k for an entry level board is no joke. for little more AMD boards comes equipped with Sata3 & USB3. not to mention build quality is better. also at OP's budget max he'll get i3 + H55 + 2Gb DDR3. will run out of money by time Cabby & PSU are added.
Jaskanwar Singh
Nov 2, 2010 at 2:09 PM
also H55 doesnt support raid too!!
coderunknown
Nov 2, 2010 at 3:33 PM
yup. i think H57 do. now think an entry level board that support RAID costs 6k & above. BTW the H series support Xfire & SLI? seen many mATX boards jam packed with 2*PCIe slots.
Jaskanwar Singh
Nov 2, 2010 at 10:26 PM
^^in them the second pcie slot is x4
pegasus
pegasus #13
Nov 3, 2010 at 3:56 PM
X2 245/250 - 2.8K approx
ASUS M4A88T-M - 4.8K approx ASUSTeK Computer Inc.
2GB DDR3 1333MHz RAM, Corsair- 2K approx
FSP SAGAII 400 - 2K approx
NZXT Gamma - 2.1K approx (CM Elite 310 cabinet - 1.6K approx)
Total- approx 13.7K
To get a rough idea on prices- *www.deltapage.com/list/index.html
S
Nov 6, 2010 at 10:52 PM
Hello guys i have decided to go for following configuration.

Processor x2 250
Asus m4a882-m or Gigabyte 880gm-ud2h(whichever is available)
2gb ddr3 1333mhz ram
Psu-gigabyte 460w
nzxt gamma cabinet
Microsoft 700 series k&m

Now i just waana ask you,
1-will i be able to play all my high defination movies ?(also suggest a monitor 23-24 inches )
2-in future if i increase my hard drive to 1tb, total would be 2.5 tb will it effect my pc performence or something?
3-will it be energy efficient as it would be 24x7 on.

Thank you.
Ishu Gupta
Nov 6, 2010 at 11:00 PM
Hello guys i have decided to go for following configuration.

Processor x2 250
Asus m4a882-m or asus 880gm-ud2h(whichever is available)
2gb ddr2 1333mhz ram
Psu-gigabyte 460w
nzxt gamma cabinet
Microsoft 700 series k&m

Now i just waana ask you,
1-will i be able to play all my high defination movies ?(also suggest a monitor 23-24 inches )
2-in future if i increase my hard drive to 1tb, total would be 2.5 tb will it effect my pc performence or something?
3-will it be energy efficient as it would be 24x7 on.

Thank you.
Thinks that should be Gigabyte and DDR3 (In bold)

1) Yes, Benq G2220HD 22" @ 7500 OR G2420HD 24" @ 10500
2) No
3) Yep
coderunknown
Nov 7, 2010 at 12:27 AM
^^ you missed the ram. its written DDR2.
Ishu Gupta
Nov 7, 2010 at 1:12 AM
^
Wasn't expecting that. :p
UPDATED
S
Nov 7, 2010 at 5:37 AM
Thank you guys. I edited my post. :)
S
Nov 8, 2010 at 12:08 PM
Both the motherboards are available with the dealer i.e gigabyte and asus.. Which one should i go for? And why?
Thanks in advance.
J
Joker #20
Nov 8, 2010 at 2:30 PM
both make solid mobos...but if asus is handled by rashi...then i wont suggest asus but both are gud.

just make sure that u only go for a good efficient PSU like Gigabyte 460w.......avoid cooler master at all costs.
S
Nov 8, 2010 at 2:47 PM
What's rashi ?? And i also read that asus board got better int. Graphics then the gigabyte one.. Is it true??
If thats the case should i go for asus?
The Sorcerer
Nov 8, 2010 at 2:56 PM
And i also read that....

Read where? :grin:

Intel and AMD are ones who make the chipset with integrated graphics- not gigabyte or asus. But I am very interested who was the genius who wrote that.
S
Nov 8, 2010 at 3:28 PM
Integrated ATI Radeon™ HD 4250 GPU
- Supports HDMI™ Technology with max. resolution up to 1920 x 1080
- Supports Dual-link DVI with max. resolution up to 2560x1600 @60Hz
- Supports D-Sub with max. resolution 2048x1536 @85Hz
- Hybrid CrossFireX™ Support
- Dual independent displays support with HDMI / DVI and D-Sub
- Supports DirectX 10.1, OpenGL 2.0, Shader Model 4.1, Universal Video Decoder (UVD) 2.0
- Hardware Decode Acceleration for H.264,VC-1, and MPEG-2
- Maximum shared memory of 1GB

This info i found on asus.. link provided above by pegasus.. I thought its int. Graphics ..

I dont know much about hardware stuff.. :p