DIGIT-ARC read-only archive · snapshot: July 23, 2026

PLz HELP! FC 6 couldn't detect sata Hdd

11 posts · originally from https://geek.digit.in/community/threads/plz-help-fc-6-couldnt-detect-sata-hdd.47456/

Adhip007
Adhip007 Original post #1
Jan 25, 2007 at 6:56 PM
Hi,

I have following config:
Intel Core2duo E6300 cpu,
Asus P5b M/B,
Hitachi 200 gb sata hdd,
512 mb DDr2 ram,
Geforce 7900gs ,
LG DVD writer

I have windows XP and Mandriva 2007 installed.

While installing FC6 it couldn't detect the hard drive, so installation could not be completed.
Also the Mandriva2007 didn't detect the DVD writer.
Please help

Thanks in advance
Adhip
Pathik
Pathik #2
Jan 25, 2007 at 7:00 PM
fc6 has no probs wit sata now.. It shd work..
Adhip007
Jan 25, 2007 at 7:05 PM
No it didn't work I shows no hdd at the time of partitioning
eddie
eddie #4
Jan 25, 2007 at 9:46 PM
Have you used Fedora 6 or Fedora 5? Your motherboard is quite new and has been reported to work with Fedora 6 only. If it does not work then I am sorry to inform you but you will have to compile a custom kernel :|
Adhip007
Jan 25, 2007 at 11:03 PM
I have used mandriva 2007, but not fc6 in this motherboard. But I think Mandriva 2007's kernel is older than FC6 (zod)
djmykey
djmykey #6
Jan 26, 2007 at 8:44 AM
Ok Adhip007 now go to your BIOS and check the mode that SATA is working in there is a Combination and another mode whose name I dun remember. Remove it from combination if you can find it. FC has some problems with that mode. So remove that setting and FC will detect your hard disk allright.
Adhip007
Jan 29, 2007 at 4:58 PM
@djmykey
I have Set SATA as IDE mode

BIOS has only two mode one ahci & IDE
eddie
eddie #8
Jan 30, 2007 at 7:30 PM
Adhip007 said:
I have used mandriva 2007, but not fc6 in this motherboard. But I think Mandriva 2007's kernel is older than FC6 (zod)
If it worked with Mandriva then try installing Fedora in text mode and note down the error at which it stops. This will help us in guessing the reason behind the non-detection of HDDs
blackpearl
Feb 1, 2007 at 7:33 PM
What the hell!! FC6 is not detecting my Sata drive too.
Stupid developers.
baccilus
baccilus #10
Feb 1, 2007 at 8:42 PM
FC6 doesn't detect my LAN card. It detects it wrongly which obviously doesn't work. It doesn't detect realtek cards i think :-(
Adhip007
Adhip007 #11
Feb 3, 2007 at 6:50 PM
Changing the settings from enhanced to compatible in Bios FC6 does detects HDD in text mode booting. but still not able to install it. It doesn't shows the hdd in partitioning screen