DIGIT-ARC read-only archive · snapshot: July 23, 2026

Problem with Radeon HD 6770 M ... Help !!!!!

13 posts · originally from https://geek.digit.in/community/threads/problem-with-radeon-hd-6770-m-help.181654/

D
dmanojkmr Original post #1
Feb 26, 2014 at 7:17 PM
My Laptop info

Core i7 2630QM @ 2.0Ghz
Radeon HD 6770 M 1 GB DDR5
Intel HD GPU
DDR3 4 GB 1333Hz Ram


I have this problem often. While playing certain games ( NFS Rivals, Grid 2 - even in low graphics) most often I get it hanged in after few min, and get a message that GPU had restarted. Is it so that the GPU is able to control these high end games ?. But I have no problem Playing Maxpane 3, NFS HP 2011, NFS RUN etc.

I have my Switchable GPU option to use High Performance GPU ( Made it Static in the BOIS). Does this means HD 6770 M GPU is alone used and not the Intel GPU? If so is there any way to make the game to use both the GPUs.
rijinpk1
Feb 26, 2014 at 7:40 PM
My Laptop info

Core i7 2630QM @ 2.0Ghz
Radeon HD 6770 M 1 GB DDR5
Intel HD GPU
DDR3 4 GB 1333Hz Ram


I have this problem often. While playing certain games ( NFS Rivals, Grid 2 - even in low graphics) most often I get it hanged in after few min, and get a message that GPU had restarted. Is it so that the GPU is able to control these high end games ?. But I have no problem Playing Maxpane 3, NFS HP 2011, NFS RUN etc.

I have my Switchable GPU option to use High Performance GPU ( Made it Static in the BOIS). Does this means HD 6770 M GPU is alone used and not the Intel GPU? If so is there any way to make the game to use both the GPUs.

rivals is a ported game. you will likely experience hangs even on a high end set up. Also update the game before playing. what is your gpu usage while playing? post a screenshot of gpuz.
D
Feb 26, 2014 at 8:45 PM
Error.jpg


OMG. :(
It is boiling inside.

Should i stay off from these games :(
harshilsharma63
Feb 26, 2014 at 9:00 PM
It's probably an overheating issue. Clean the air vents and use a good laptop cooler.
rijinpk1
Feb 26, 2014 at 9:31 PM
you should reapply the thermal paste on your 6770m.try any good one like artic silver 5. till then it is better not to play any games.
D
Feb 26, 2014 at 10:33 PM
ok. Thank You.

I'll try it.

Buy the way whats the maximum temp & other variables you get while playing hardcore games..
rijinpk1
Feb 26, 2014 at 10:39 PM
ok. Thank You.

I'll try it.

Buy the way whats the maximum temp & other variables you get while playing hardcore games..

i dont have a laptop. anyway you should keep it under 85C.Reapplying thermal paste on your 6770m will result in a considerable drop in temperature, if that exactly is your case.
aaruni
aaruni #8
Feb 26, 2014 at 10:44 PM
I believe its acceptable till 90 C for ultra high end games (ultra high-end in comparison to your laptop). Mine usually stay stable around 85-87 while gaming.
seamon
seamon #9
Feb 27, 2014 at 12:27 AM
I think 85 degree and up is dangerous for long terms. Just touching 90 is okay for a short while but may lead to capacitor failures in the mobo near the GPU. My 8850M never exceeds 80.
D
dmanojkmr #10
Feb 27, 2014 at 3:51 PM
And I found 1 thing, that my fan speed keeps constant at 30% neither increases nor decreases any problem ? or is it cause of HP's cool sense technology. I even tried turning it off.
harshilsharma63
Feb 27, 2014 at 5:01 PM
And I found 1 thing, that my fan speed keeps constant at 30% neither increases nor decreases any problem ? or is it cause of HP's cool sense technology. I even tried turning it off.

You can use Open Hardware Monitor to manually set the fan speeds to 100% while playing games.
aaruni
aaruni #12
Feb 27, 2014 at 7:18 PM
And I found 1 thing, that my fan speed keeps constant at 30% neither increases nor decreases any problem ? or is it cause of HP's cool sense technology. I even tried turning it off.

how do you check fan speed?

You can use Open Hardware Monitor to manually set the fan speeds to 100% while playing games.

Will it cause any problem whatsoever to mess with fan settings?
Arjun609
Arjun609 #13
Apr 15, 2014 at 9:34 PM
Iam not sure. I think you must apply some patch