DIGIT-ARC read-only archive · snapshot: July 23, 2026

Problem with Super Multi LG: HL-DT-ST DVD-RAM GSA-H55N

6 posts · originally from https://geek.digit.in/community/threads/problem-with-super-multi-lg-hl-dt-st-dvd-ram-gsa-h55n.120319/

R
rose tamang Original post #1
Aug 18, 2009 at 1:48 PM
Hi, Guys,
I've a LG HL-DT-ST DVD-RAM GSA-H55N optical drive called "Super Multi" Brand
Is there anyone out there to help me with my DVD writer. Not burning dvds since I bought on 01 Jan 2008.
The Pros:
1. It reads most of the DVDs except few digit DVDs.
2. It reads well all sorts of CDs.
3.It burns CDs well.
4. Bios displays the drive as a DVD Writer Drive
5. DMA mode is on.
The Cons:
1. I use Nero Express Edition 7.0 to write DVDs but the drive doesn't detect blank DVD, inserted before hand and ejects the drive tray apealing for the blank DVD disk to be inserted.
My system configuration:

A) Processor: Celeron 3.06GHz
B) Mother Board:
Gigabyte: 945GCM -S2L
FSB: 1066 MHz
C) Memory:
RAM: DDR2 - 512 MB, 533MHz
D) Hard Disk:
Seagate: 80GB (SATA)
STX - L3510(B)
Firmware: 3.AAD
E) Optical Drive:
i)LG: Super Multi DVD RW - GSA - H55N

ii) LG: DVD ROM: GCC - H21N

F) Power Supply:
ATX 380W Goldkist
G)Operating System: Winxp SP3


rose
harishgayatri
Aug 27, 2009 at 4:28 PM
Is it your purachase date that is 1st Jan

Or

It has not been writing from 1st Jan onwards.

BTW If it is under warranty then get it repaired from LG Service Center.

Else try cleaning the Lens.

If none of the above works then Purchase a new Non LG/SAMSUNG Writer

Try Moserbaer.
R
Sep 11, 2009 at 9:33 AM
Hey, anyone there!!

Shall I flash drive bios!!

Has anyone ever tried so?

What's your experience?

Any site for downloading new firmware for my drive?

what's the risk?
H
Sep 11, 2009 at 10:36 AM
Looking at your sentence formation, I would assume that its never burned a DVD since it was bought. For that I can only say, that its typical LG burner issue. Maybe the DVD writer's burning lens was bad from the factory. Funny that you, stuck with it for so long! You could have changed it.
About you other queries, you can do firmware upgrade. Check you manual for that for the process and site to download the firmware.
Risk is your DVD Writer going dead!
aswin1
aswin1 #5
Sep 13, 2009 at 9:44 PM
Try a different brand of blank DVD or a different software to burn.
R
Oct 9, 2009 at 7:50 AM
I've tried the drive with different DVDs and Burning Softwares. But of no avail.