DIGIT-ARC read-only archive · snapshot: July 23, 2026

PSU for a Core-i3 build

7 posts · originally from https://geek.digit.in/community/threads/psu-for-a-core-i3-build.129262/

S
salvachn Original post #1
Jul 8, 2010 at 11:12 PM
Hi.

I am getting a PC with the following config for a friend. Can you suggest a beefy PSU that can handle these components?

Core i3-530
Intel DH55TC board
Transcend DDR3-1333 2GB * 2
XFX ATI HD 5670
Seagate 2 * 500 GB SATA 7200rpm HDD
Seagate 250 GB HDD (old)

Thanks.
Vensanga
Jul 8, 2010 at 11:37 PM
go for corsair vx 450 @ 3700..it will be more than enough for u!!!!
coderunknown
Jul 8, 2010 at 11:59 PM
Hi.

I am getting a PC with the following config for a friend. Can you suggest a beefy PSU that can handle these components?

Core i3-530
Intel DH55TC board
Transcend DDR3-1333 2GB * 2
XFX ATI HD 5670
Seagate 2 * 500 GB SATA 7200rpm HDD
Seagate 250 GB HDD (old)

Thanks.

FSP Saga II 350W (minimum).
FSP Saga II 400W-500W.
Gigabyte 400W (minimum) or 460W.
Corsair CX400W or VX450W.
also a few tagan PSUs.

i'll recommend get Corsair or FSP.
S
Jul 9, 2010 at 2:21 PM
FSP Saga II 350W (minimum).
FSP Saga II 400W-500W.
Gigabyte 400W (minimum) or 460W.
Corsair CX400W or VX450W.
also a few tagan PSUs.

i'll recommend get Corsair or FSP.

Thanks, I am getting the FSP Saga II 500 W. Are FSP PSUs very good? I was recommended one for my AMD PC too, in another thread.
S
Jul 10, 2010 at 11:03 PM
Since the FSP Saga II was not available at the store, I went with a Huntkey V Series 500W PSU. Is it good?
S
Jul 12, 2010 at 6:26 PM
Bought:

Core i3-530 + Intel DH55TC board @ 10.4k
Transcend DDR3-1333 2GB @ 2.6k
Seagate 1 TB SATA 7200rpm HDD @ 3.3k
Huntkey V Power 550W @ 2.7k
Local cabby (Qori if that means anything) @ 1k
Numeric UPS 600VA @ 1.6k
Logitech Desktop @ 700

Total: 22.3k

Planning to add a gfx card once he gets some more dough :)