DIGIT-ARC read-only archive · snapshot: July 23, 2026

RAM overclocking

8 posts · originally from https://geek.digit.in/community/threads/ram-overclocking.40597/

assasin
assasin Original post #1
Nov 7, 2006 at 8:19 PM
I've a Hynix 1GB DDR2 667 ram RAM timings r 5-5-5-15 and latency is 61.5ns.My mobo is Asus M2N-MX.I've OCed the ram to 800MHz and dere was no booting probs.PC ran stable even during gaming.At 800 RAM timin is 5-5-5-15 and latency is 51ns.My question is is will d RAM get damaged if i run it at 800MHZ?
C
Ch@0s #2
Nov 7, 2006 at 8:32 PM
^^Did you increase the voltage? If the voltage is less than 2-2.1V, there's no chance of damage. Above that, you'll need active cooling.
assasin
assasin #3
Nov 7, 2006 at 9:21 PM
Voltage setting is at default setting.I ony inc the FSB.Is there any active cooling sol for RAM?If yes plz mention its cost and d name of the manufacturer.
samrulez
Nov 7, 2006 at 9:34 PM
Well...."active" cooling solutions are not very easily available....but just add a 80mm or 120mm fan to it....it shouldn't cost you much ;)
assasin
assasin #5
Nov 7, 2006 at 9:46 PM
Dude how do i add a fan near the RAM?I mean where shall i fix the fan????
samrulez
Nov 7, 2006 at 9:57 PM
Well you will have to make use of you modding skills for that.. ;) ..

Hints:Try Using Twin sided tape...
Try hanging it with a piece of wire, suspend it from the PSU wires...Stick it to the mobo heat sink..
assasin
assasin #7
Nov 7, 2006 at 11:33 PM
Thnx 4 d idea dude.
C
Ch@0s #8
Nov 8, 2006 at 1:05 AM
@sam: I meant using a fan as active cooling

Here's how I did it

*img61.imageshack.us/img61/9259/0311062108vk9.jpg