Raspberry Pi 4 - devil's curse from hell

This is probably going to end up less a review of the product and more of a rant about my awful experience with the Raspberry Pi 4. However, at the risk of the post getting deleted by the mods, I would still like to go ahead with it.

I had been wanting to buy a Pi for some time now. I didn't really have a lot of use of it. I just wanted to share my hard drive over my network and create an always on torrent machine. I was always skeptical of the Pi's performance, given its specs, so kept delaying my purchase. However, when the Pi 4 came out, the 4GB RAM option was just enticing enough that I ended up ordering one. Little did I know that I was inviting the devil's curse home.

First up, the Pi is slow, ridiculously, unbearably slow. With a Samba server and Transmission client running in the background, letters take time to appear in the terminal window. If I open 3 tabs inside Chromium, that's the death knell for the Pi. When I tried doing this, just a few times of course, it gets stuck completely and I have to switch it off. And god forbid if I try playing a video inside the browser!

Next, the Raspbian OS, including NOOBS, is buggy. NOOBS just didn't work for me. I finally found a solution and installed Raspbian directly, which, thankfully, worked. But it's very unstable. As mentioned earlier, it hangs at the drop of a hat. At times it crashes as well. Settings changes take ages to implement and at times, just refuse to change. For instance, just now I tried moving the taskbar to the bottom and it just wouldn't. The settings window closes after clicking ok, but the taskbar stays on top.

The board has a heating issue. Now you might find reviews about the heating issue and reviews telling you that the issue is not that big, but trust me, for Indian climate, it is an issue. Even though Mumbai doesn't have much of a winter, the weather is still cool right now. And yet, with moderate usage, the Pi was hitting 70 degrees. I got a heat sink and a fan to keep it cool, after which the temperature dropped below 45.

Since there's not much else to do with the Pi, seeing how it can hardly run anything more than one torrent client, my remaining issues are with Linux. For a person who is used to Windows, Linux is simply impossible to use. And I'm tired of hearing that I haven't spent enough time with it. Over my life, I have used all versions of Windows through 98 to 10, Mac OS, Android, Symbian OS, iOS, and Ubuntu. I haven't struggled with any of these other than Linux.

It was probably some 10 years ago when I tried Ubuntu for the first time. When I use it today, I see the exact same UI, and exact same unfriendliness of usage. The Ux and UI have not evolved even one bit over the last entire decade. A simple thing like installing a software still remains a challenging task on Linux.

Setting up anything from Transmission to teamviewer requires you to follow an instruction manual. There's no intuitive process for anything. And setting up doesn't mean just installing a software, it also means going to battle with the software's settings and file permissions and user permissions, all of which seem rigged to make it impossible to actually use the software. And changing settings doesn't mean going into settings dialog and clicking a few checkboxes, it means hunting through your file system to edit multiple text files with absolutely zero lines of human readable text. Setting up transmission requires me to edit settings in 3 different files.

However, the worst is yet to come. Even after following all the instructions to the t, there's no guarantee that the software will work. In fact, it's almost guaranteed that it will not, no matter which guide you follow. Every single software which I installed required me to hunt through multiple forums to resolve all the issues I faced after following the instructions.

All in all, it's been my worst spent 6000 rupees. It's completely and utterly useless as a computer and no one should ever recommend it for anything other than robotics projects. At the very least, should not recommend to non-IT people who are not already familiar with Linux. A device which cannot run two programs simultaneously should not be called a computer.

I totally understand your frustrations with linux. Completely. I realized only too late that linux is just not worth the trouble. Now I use freebsd on my server. Windows on my desktop. Peace.
That said, performance is generally never this bad that letters take time to appear. Even in far lower speced machines. Can't say what's causing it.. maybe overheating, maybe some process.

btw I think there is a typo, it seems like you suggest Ubuntu is not linux.

If you want to run a server, why are you using a GUI at all? Just use a bare-bones OS and only use CLI tools such as aria2 and wget for downloading torrents. IMO using a Raspberry PI as a full fledged PC is asking too much of it.

Edit: In other words, using a GUI on a server is a waste of resources IMO.

Hey I understand your frustration, and as desmond suggested, if you are using it for a server like usage, you arent supposed to install a GUI OS at all. But you are right, Linux is extremely frustrating for a newbie. You cannot fix almost any issues without using terminal. There are so many package managers, it would be very difficult to understand for someone new, and linux doesnt treat "Applications" the same way Windows/MacOS/Android/iOS treat them.
But hear me out, try Openmediavault. Its a debian distro DESIGNED to do the tasks you mentioned above, while being responsive (since all the UI you see will be accessed from your home computer's browser). Everything is already set up (mostly)..

These are the docker containers I'm running on my ROCK64 (A SBC Similar to yours, but thankfully cooler).. Dockers are basically isolated subsystems which run a specific app or service.. So I can have a docker for running a torrent client like deluge and have it running and accessible from a specific port on the network. Maybe another docker for running a movie aggregator like radarr, which would run on another port on the network. These two could interact with each other, say I download john wick through radarr, it would ask the deluge running on another port to download and put the movie file in a shared hard drive.

Just give it a go, plenty of tutorials on how to set up omv.
*www.dropbox.com/s/tgt07j37tvmyd8x/openmedivault.PNG?dl=1

W

I also understand as @Desmond David would know from my recent experience of running a video contact sheet tool on my seedbox using ssh. Linux can be quite good & efficient if(& that's a big if) you are willing to put in the effort. I spent a few days & few hours searching,asking & then applying my own theories to experiment & finally figured out the way to do it & now that I know it,it is certainly much faster & efficient than even using similar gui software on windows. However I simply can not recommend what i did to a typical person because I myself am not your typical pc user. The way I see it,putting enough effort to learn about linux is worth only if either it helps you professionally(servers,networking etc) or if you have a genuine interest in learning things just for the sake of learning. For all others it is better to stick to windows,it has been after all the most popular os in the world for decades for a reason & will remain so in the foreseeable future.

W

@Nerevarine I first read in detail about dockers while reading(just for time pass) "Hands-On Reinforcement Learning with Python" & its initial chapter of setting up OpenAI & TensorFlow. Just found out it can also be used for such media tasks. :grin:

The typical way to use a Raspberry PI is to use it simply as a download tool rather than as a PC in itself. What I would personally do is download the .torrent file on my PC or phone (or get the magnet link) and then send a download command to the Raspberry PI over SSH. This way the Raspberry PI will begin downloading the file and once its done, you just download from it to the device of your choice. This way you don't need a GUI and you fulfill the purpose of your Raspberry PI.

A somewhat more advanced setup could be to monitor certain patterns of torrents from time to time (such as availability of a TV show torrent) and download the torrent when it becomes available. This removes the need for manual intervention when downloading.

Let me know if you need detailed instructions for setting up something like the former.

Thanks a lot for the suggestions guys.
@Nerevarine I'll definitely read up a bit openmediavault. Now that I'm not going to use it for anything else, I might as well use an OS purpose built for my usage patterns.

@Desmond David Even thought I have used command line for ages now to execute a few commands here and there on Windows or write small batch scripts with basic functions, I'm just not comfortable enough to work with a PC without a GUI. Having a GUI helps a lot. For instance, I can browse for file from the file manager, I can see that the drives are mounted just by navigating to that folder, I can open a browser window side by side and copy paste commands from there, etc.
I understand how all this can be accomplished using Putty from a remote machine as well. Now that Samba and transmission are already set up on my Pi, I might try to run it headless. Maybe that will also help the CPU stay slightly cooler.

While I don't want to monitor for TV shows etc., I did try to create a script to monitor a folder for torrent files, so that I can simply put the torrent files on the shared folder and the Pi will pick it up from there. Unfortunately the Pi crashed before I could fully set up the script and try it out. I'm yet to create that script again after reinstalling raspbian.
My script was written in Python and what it did was to try to determine the type of content from the torrent file and start the download in the right folder. For this it scanned the torrent file for known trackers, if this fails then check file extensions, then based on number of files and/or file name patterns, determine the type of content. So for instance, if the torrent has a file with the patters S\d\dE\d\d or \dx\d\d it goes into TV folder, if it has mp3 or flac files, it goes into music folder, etc. The script was working as expected. When I ran it manually, it managed to add the then available torrent files with the correct destination folder.
If you could help me call this script every time I add a file to that folder, that would be much appreciated. I tried inotifytools, but I couldn't run it as a daemon, kept encountering errors.

Once again, thanks everyone. Now I feel like I'm not alone, I feel less dumb for not being able to use linux

W

@Cool Buddy have you thought about using rss feed auto downloader for torrents,you can set up multiple filters using regex expressions & your torrent client will start the torrent as soon as it is published on the rss feed of torrent site.

Cool Buddy said:
I can browse for file from the file manager, I can see that the drives are mounted just by navigating to that folder, I can open a browser window side by side and copy paste commands from there, etc.

Use a FTP client such as Filezilla or WinSCP for that.

Cool Buddy said:
Now that Samba and transmission are already set up on my Pi, I might try to run it headless

This is what I meant.

Cool Buddy said:
If you could help me call this script every time I add a file to that folder, that would be much appreciated. I tried inotifytools, but I couldn't run it as a daemon, kept encountering errors.

inotifytools is well suited for this, but if you want a simpler solution, you could run a python script in an infinite loop checking for files in a directory. When files are found, then you process them and then continue the loop.

Cool Buddy said:
I feel less dumb for not being able to use linux

We were all noob once lol.

Edit: BTW, what are you using for download? Transmission? If you can help it, try using aria2. You can write your python script to call it directly using `os.system(<command>)`

*www.dropbox.com/s/4ao74vpccwkpmbt/link%20aggregator.PNG?dl=1

*www.dropbox.com/s/735gs70d41c7wrd/jackett.PNG?dl=1

*www.dropbox.com/s/lqcrj4hr6hrqozq/deluge.PNG?dl=1
Use a movie aggregator like Radarr or CouchPotato.. They will give you hits to any websites you set up, instead of having to manually search in these websites, You can even configure quality and bitrate you are looking for, like I set up here above.
Radarr = Movies
Sonarr = TV
Jackett = Torrent Query API
Deluge = Download client (torrents only)

Example above

Nerevarine said:
*www.dropbox.com/s/4ao74vpccwkpmbt/link%20aggregator.PNG?dl=1

*www.dropbox.com/s/735gs70d41c7wrd/jackett.PNG?dl=1

*www.dropbox.com/s/lqcrj4hr6hrqozq/deluge.PNG?dl=1
Use a movie aggregator like Radarr or CouchPotato.. They will give you hits to any websites you set up, instead of having to manually search in these websites, You can even configure quality and bitrate you are looking for, like I set up here above.
Radarr = Movies
Sonarr = TV
Jackett = Torrent Query API
Deluge = Download client (torrents only)

Example above

This is better than I thought.

Edit: Redact your API key. I removed that image as a safeguard. Add it back after covering it up.

Solution isnt perfect, its pain in the ass to import movies you have manually downloaded earlier to show up in radarr library.. But for the ones you download through radarr, it works just fine..
Im just waiting for new HDD to come, and I'll import it back to my library and get this going..

EDIT: I just realised i got my api key out.. Desmond can you unquote me and ill blur it and upload again..

Anyway, my current setup is running on LAN. But you can choose to get this online and control all this remotely if you use port forwarding (if your ISP gives you that luxury), or something like serveo to do SSH tunnelling.. (add some security measures, use TLS).
Also use something like nginx to do a reverse proxy and have your services under a single outbound port..

like your ipaddress/radarr -> mapped to port 7878 on local (radarr port)
ipaddress/jackett -> mapped to port 7879 on local (jackett port)..
etc..

Nerevarine said:
Desmond can you unquote me and ill blur it and upload again

It's covered in the quote as well.

@Nerevarine I'm more into non-English European movies which have poor availability on public trackers and Netflix/Hotstar/Prime. So I mostly use private trackers for movie downloads. So this automation won't work for me. But thanks for letting me know the options. It's always good to know what's out there, in case I need it in future.

@Desmond David as mentioned above, I use private trackers and Aria2 is not allowed on them. So out of luck there.
My only options are Deluge and transmission. But Deluge doesn't have a GUI app for windows since their version 2.0 was released. The WebUI doesn't allow me to rename files from within. Now I need to rename files from within because, again, I use private trackers and I need to keep seeding. But if I don't rename, Kodi often doesn't recognise them properly. So I end up with Transmission as the only option, which allows me to rename the files even from the web UI and also has a proper Windows application.

Cool Buddy said:
@Nerevarine I'm more into non-English European movies which have poor availability on public trackers and Netflix/Hotstar/Prime. So I mostly use private trackers for movie downloads. So this automation won't work for me. But thanks for letting me know the options. It's always good to know what's out there, in case I need it in future.

@Desmond David as mentioned above, I use private trackers and Aria2 is not allowed on them. So out of luck there.
My only options are Deluge and transmission. But Deluge doesn't have a GUI app for windows since their version 2.0 was released. The WebUI doesn't allow me to rename files from within. Now I need to rename files from within because, again, I use private trackers and I need to keep seeding. But if I don't rename, Kodi often doesn't recognise them properly. So I end up with Transmission as the only option, which allows me to rename the files even from the web UI and also has a proper Windows application.

Tell me the name of the tracker, maybe its there in Jackett

W

@Cool Buddy Since it is a private tracker I can suggest you this solution which is a bit costlier but to me it is better in the long term.

Take the cheapest shared seedbox from seedhost for 500/month. Setup rss feed auto download to start downloading any freeleech torrent(if it is available in tracker) or any torrent. As soon as any matching torrent is published you will connect to it as peer. Seedhost shared seedbox has one of the best racing performance for hdd shared seedboxes,you will easily achieve 2-3 ratio on any torrent from start & for popular torrents you can even achieve ratio of 6+. Keep doing this for a year & you will easily build a buffer of ~20TB+. Now enjoy downloading 20TB without having to worry about seeding long term & as for Hit & Run I think most pvt trackers give ~4 days of seeding before stopping to remove the HnR tag.

@whitestar_999 maintaining ratios is not a worry as one tracker is ratio free and other has a reasonable bonus point system, so seeding for enough time gives me enough bonus points to maintain ratio.

@Desmond David @Nerevarine I have set up cron job instead of using inotifytools. I just found out that there's already a tool in Pi to schedule tasks. So I thought better to use it instead of installing a new application. The cron job calls my Python script every minute. The Python script checks the folder and adds any torrent files there into Transmission. This also takes care of having to select the correct folder every time manually. So as of now, I'm all set up.

And I also didn't know that I could access the Pi's files through SFTP. So learnt that as well when Desmond mentioned accessing the files through FTP.

Thanks guys, I didn't know creating this thread here will be of so much help. I feel at peace now. :peace:

@Desmond David
Does using raspberry pi in headless mode simply mean accessing it through SSH and running the commands?
Or is there a way to disable the display completely, so that the Pi is not unnecessarily processing the screen graphics?

I'm not able to find anything on this. When I search anything with the word headless, all I get are results for how to setup the pi as a completely headless server.

Here is another usecase Ive thought of using a Pi.
Say you want to backup all your photos and do it automatically. You may not have google drive space to continuously push photos at max quality.
Setup sync thing on your OMV server, and on your phone, point to appropriate folders and whenever you are at home connected to your network, all your photos will automatically be backed up to your NAS.
You can then choose to optionally encrypt/compress them.. (automatically)

Cool Buddy said:
Does using raspberry pi in headless mode simply mean accessing it through SSH and running the commands?

This might be foolish. But you can always install something like Ubuntu server ( no GUI to process ) and then use a web panel's File Manager for UI or NextCloud for file storage. All you have to do is to configure a static IP locally.

meetdilip said:
This might be foolish. But you can always install something like Ubuntu server ( no GUI to process ) and then use a web panel's File Manager for UI or NextCloud for file storage. All you have to do is to configure a static IP locally.

Thats exactly how it should work. No utilizing the pi's weak gpu to render display or GUI. Use a web server

meetdilip said:
This might be foolish. But you can always install something like Ubuntu server ( no GUI to process ) and then use a web panel's File Manager for UI or NextCloud for file storage. All you have to do is to configure a static IP locally.

Can Raspbian be run in server mode, without GUI?

I think it should. Never tried it myself. Ubuntu has some really useful guides on how to use on Pi. They are officially supporting Pi these days. That means you can use platforms like AskUbuntu for support.

W

@Cool Buddy headless itself means there is no graphic output directly from mobo/processor/system. When you are running ssh commands then display being used is your system & pi is just running those commands.Sure the signal to display those commands on your ssh screen comes from pi but it is nowhere near to doing the same thing on a display directly connected to pi or via remote desktop like session to pi.

Cool Buddy said:
@Desmond David
Does using raspberry pi in headless mode simply mean accessing it through SSH and running the commands?
Or is there a way to disable the display completely, so that the Pi is not unnecessarily processing the screen graphics?

I'm not able to find anything on this. When I search anything with the word headless, all I get are results for how to setup the pi as a completely headless server.

Headless means there is no UI and its as barebones as possible. If the OS on your Raspberry PI has any desktop environment, then it will be loaded into memory until you either remove it or use another distro that does not have a GUI. I am not sure if you can completely disable display, but removing the display driver might work.

W

@Desmond David But desktop environment/display driver loaded into memory & just sitting there doing nothing will only result in ram usage but no cpu usage,for it to do something there should be some monitor/remote desktop session etc,right?

If you want a distro which has extremely lightweight cpu and ram utilization, is barebones (but not too barebones !), doesnt have a desktop UI and has great community support, try dietpi..

Nerevarine said:
and has great community support, try dietpi..

Community support is what matters. No matter you use it on PC or server. At some point, you are going to hit a wall and no help is really going to take the toll on you.

The Raspberry Pi has an option to boot into CLI, no GUI. It can be accessed inside boot settings by typing

Code:

sudo raspi-config

in the terminal.
I have enabled that now. So no more mouse support.

Support for Raspberry Pi 4 is even poorer in general. A lot of alternative OSs which worked on 3B+, still don't work on 4. Apparently there were some changes in how the OS boots the first time, which hasn't been implemented in all the alternatives yet. Hell, even NOOBS doesn't boot reliably on the Pi 4. I guess it will take another 5-6 months before the support for Pi 4 is robust as earlier versions.

yeah because its new. Opensource is like that, atleast it is guarenteed you will have support in the future because Raspberry pi is a well known device.. No such luxury for me

Which is why I opted for Pi even though I was aware of the alternatives. I'm not familiar with linux as it is. At least when it comes to Pi, I get all the support I need from forums.

Offtopic but I contacted my broadband provider and they do give out static ip for free.. its ipv6 static ip, so lets see ..

whitestar_999 said:
@Desmond David But desktop environment/display driver loaded into memory & just sitting there doing nothing will only result in ram usage but no cpu usage,for it to do something there should be some monitor/remote desktop session etc,right?

Running in memory is still memory used which could be used to handle slightly more requests IMO. But yes, CPU will not be used because the process will be in suspended state.

W

Nerevarine said:
Offtopic but I contacted my broadband provider and they do give out static ip for free.. its ipv6 static ip, so lets see ..

Take it,I recently found out that many seeders/peers in countries like China/South Korea/Japan etc are using home broadband connections that gives a hybrid ip in the form of dedicated ipv6 but a common ipv4 for a group(say some apartment complex,housing society etc) so they are usually connected to ipv6 peers unless there is such large traffic that ipv6 is unable to handle the bandwidth(in which case some traffic is rerouted to the shared ipv4 resulting in its exposure to the ipv4 peers) but this rarely happens as most of these connections are gbps/100mbps+.

So my new hard disk drive arrived today.. Went with a purple drive for extra warranty at same cost..
Total Cost :
Rock 64 = Rs 3500 (2GB)
Case = Rs 600
Power supply = Rs 690
Western Digital Purple 1 TB = Rs 3000 (may upgrade in the future ?)
Orico Standing dock = Rs 1950
SD Card (Samsung 32 GB Cant remember exact model) = 799
Total = Rs 10,540
Full setup :
Full setup, gonna put this all in a side table once i get that.

*i.imgur.com/tJsVeGQ.jpg

Added Godzilla in radarr, downloaded in 1-2 hr

*i.imgur.com/kFXwQ3A.png

Library Shared on Network, Kodi running on main PC

*i.imgur.com/CobOM2e.png

HDR Properly detected in KODI

*i.imgur.com/oYOVFba.jpg

Does Rock64 have different buses for ethernet and USB? AFAIK Raspberry PI has same bus for ethernet and USB, that is why network performance and USB performance will go down on Raspberry Pi if you use it to share storage over the network.

To be honest, I like this thread. Because I always wondered how a powerful CPU can act like a fool in front of a 6k board. I thought perhaps electronics has evolved so much. But looks like if you are going to have a NAS, you need strong hardware as well. At least moderate.

Desmond David said:
Does Rock64 have different buses for ethernet and USB? AFAIK Raspberry PI has same bus for ethernet and USB, that is why network performance and USB performance will go down on Raspberry Pi if you use it to share storage over the network.

Yes, it does, that's the reason I chose it over 3b.. 4 wasn't released at that time.

Nerevarine said:
Yes, it does, that's the reason I chose it over 3b.. 4 wasn't released at that time.

BTW, where did you get your Rock64 from? Amazon? The prices seem too expensive there.

From official store, ROCK64 SINGLE BOARD COMPUTER – PINE Store

I would not recommend you to buy rock64, as it's EOL now and not much development is going on.
Raspberry pi 4 would still be better choice for dev work, provided you can do adequate cooling.. Wait for next revision maybe.

In terms of hardware,
RockPi4 ~= RockPro64 > Pi4 > Rock64

In terms of software support
Pi4 >>>> others

For a NAS, minimum you should aim for is Gigabit Ethernet and USB 3.0 on their separate buses, a USB 3.0 enclosure with HDD/SSD, Gigabit LAN router/modem and/or wifi AC if you are going to use it on mobile or laptop.

HDD/SSD (Sata 3 6gbps) With USB 3.0 enclosure (5 gbps bottleneck ---->Gigabit Ethernet (1 gbps bottleneck) ----> SBC (CPU Bottleneck) ----> Gigabit Ethernet (Router/modem/switch) -----> Wifi AC or Gigabit Ethernet device..
Max Final speed can be 1 gbps for any files stored on your hdd (120mb/s)
Reality you should get 80-90% depending upon how powerful the cpu on sbc is.

Desmond David said:
BTW, where did you get your Rock64 from? Amazon? The prices seem too expensive there.

Thingbits or robu.in seem to better options for these things, it's cheaper. But they don't seem to stock rock64. I myself bought my Pi from Thingbits.
This one has rock64 ROCK64 MEDIA BOARD COMPUTER - 4GB RAM

Nerevarine said:
Offtopic but I contacted my broadband provider and they do give out static ip for free.. its ipv6 static ip, so lets see ..

I have a local ISP, I doubt they'll support these. I don't even know whom to ask, I got it from the local cable guy.

Today I discovered that while setting up Transmission on my Pi, I had set it to store ongoing downloads on the memory card. So it was storing everything there, and then moving them to the external HDD on completion. After changing this behaviour, i.e., shifting all the locations to the mounted drive, the Pi seems to be running smoothly even when a download is ongoing. Earlier when torrents were downloading, the Pi would completely stop responding, even to terminal commands, till the download was complete.

Don't know if this is expected behaviour in case internal storage is getting full, but this does seem to have been a mistake on my part.

I think it's expected. AFAIR Transmission (or any torrent client for that matter) stores the download chunks to the user's home directory by default because it is usually the only directory on the system wholly owned by the user. The home directory will always be on the main storage.

My guess is that read-write actions are a lot less strainful when you do it on HDD or SSD than a memory card. That would have freed up some resources.

Kind of offtopic but since we dont have a dedicated linux thread :
A pleasant surprise I got from my ROCK64 today.. As you know I use sonarr to download TV Shows, and one of the shows I downloaded was Better Call Saul..
Today the latest episode got released and lo and behold, Sonarr automatically downloaded it, based on the quality I like, and renamed/put it in correct folder and scheduled a drive upload tomorrow..
Truly the stuff of comfort

Nerevarine said:
Kind of offtopic but since we dont have a dedicated linux thread

This is basically the dedicated Linux thread : Do you use Linux OS as daily driver?

Sent from my GM1911 using Tapatalk

Nerevarine said:
Sonarr automatically downloaded it, based on the quality I like,

I wouldn't want that. I decide what to download. Nevertheless, happy for you.

Nerevarine said:
Kind of offtopic but since we dont have a dedicated linux thread :
A pleasant surprise I got from my ROCK64 today.. As you know I use sonarr to download TV Shows, and one of the shows I downloaded was Better Call Saul..
Today the latest episode got released and lo and behold, Sonarr automatically downloaded it, based on the quality I like, and renamed/put it in correct folder and scheduled a drive upload tomorrow..
Truly the stuff of comfort

Beats setting up an RSS feed for every show. Then again, these days I've only been downloading complete seasons, rarely individual episodes.

is your pi working well now or there is still lagginess still?

pkkumarcool said:
is your pi working well now or there is still lagginess still?

It's working now. I don't face any problem connecting to my torrent client or shared network drives. I have disabled the GUI and am using it completely headless now. I've also connected it to the router via cable to reduce lag while streaming.

Heating issues are there though. I have set a cron job to check the cpu temperature every 5 minutes and notify me via telegram if it crosses 68. I get notified whenever a download is running or the files are being accessed over the network continuously. I have ordered a fan as my old fan was too noisy and I had to take it out. But apparently the dealers import it from China and the import is stuck because of the Coronavirus related slowdowns.

Get fan from robu.in.

Nerevarine said:
Get fan from robu.in.

Already ordered from Thingbits, stuck on the way.