DIGIT-ARC read-only archive · snapshot: July 23, 2026
S
sabmayahai Original post #1
May 8, 2011 at 12:12 AM
PC Build Request Template

Fill up the following in your OWN configuration THREAD on the first post itself using the questions exactly as below: this will save both the requestor as well as the advisor a lot of time, effort and heartburn. Keep an open mind when someone suggests an alternate brand as they are more aware of the current performers than you are. Being a fanboy will end up wasting money.


1. What is the purpose of the computer? (Note: If you are planning to say multimedia, you will have to be more specific as all types of systems are capable of doing that)
A: Home use; watching movies, occasional gaming and net surfing et al. I use Acad some times for CAD drafting.

2. Are you open to alternate ideas/products giving similar better performance but offering more VFM/ sellers? If not- why?
A:yes

3. What is your MAX budget?
A:Rs. 35000

4. Planning to overclock?
A: no

5. Which OS are you planning to use?
A:Windows 7

6. How much hard drive space is needed?
A: 1TB

7. What resolution will the screen run at & whats the size of the screen you want? If you already want have one and want to use it, mention its resolution and size.
A: Would like minium 22''. i would prefer to have a monitor where i can connect Dish tv set top box directly to monitor to watch TV if required w/o TV tuner card in PC

8. How would you rate your hardware knowledge from the count of 1-10? (1 being the lowest, 5 being you are somewhat in sync with the current performers and 10 being the highest)
A: 3

9. Have you ever built a desktop before or will this be done by an assembler?
A: No. will be done by assembler

10. When are you planning to buy the system?
A: in a week

11. Are you one of the types looking out for "future proof" configurations?
A: yes around 3 years before i switch

12. Are there going to be any components that you don't want to include in this new rig? If yes, do mention.
A: UPS, printer

13. Which city do you live in and are you open to buying from shops from other city/states?
A: Thane near Mumbai

14. Mention any other points if deemed necessary
A:
thetechfreak
May 8, 2011 at 4:28 PM
Component | Make | Price Processor |AMD Athlon II x4 640|4600
Motherboard |Gigabyte GA-880GMA-UD2H/Gigabyte GA-880GM-UD2H/Gigabyte GA-880GA-UD3H|4500
RAM |G.Skill F3-10666CL9S-4 GBNQ|2200
HDD |Seagate ITB 7200.12 |2700
DVD Writer |LG 22X SATA DVD|900
PSU |FSP Saga II 500W|2100
Case |CM Elite 310|1500
Monitor |Benq G2220Hd|7300
Mouse |Logitech 3 Button Scroll|300
Keyboard |Logitech KB-200|400
Mouse and Keyboard |Logitech MK 100|500
Speakers |Logitech Z313|1000
| Total |28000

and if you want Intel based,



Component | Make | Price Processor |Intel Core i5 2400|9500
Motherboard |Intel DH61WW|3300
RAM |Corsair value DDR3 4GB|2200
HDD |Seagate 1TB 7200.12|2600
DVD Writer |LG 22X SATA DVD|900
PSU |FSP Saga II 500|2000
Case |CM Elite 310|1500
Monitor |Benq G2220hd|7300
Mouse and Keyboard |Logitech MK100|500
Total ||29800



Graphic card-
Component | Make | Price Graphic Card | Sapphire HD5770 |7500


If you can spend extra money on Intel, well worth it.
M
May 8, 2011 at 5:11 PM
Component | Make | Price Processor |Intel Core i5 2300|Rs.9000
Motherboard |MSI H61 E33 B3|Rs.3300
RAM |Corsair CMV4GX3M1A11333CL9 4GB DDR3 Single Stick|Rs.2200
HDD |Seagate 1TB 7200.12|Rs.2600
DVD Writer |LG 22X SATA DVD|Rs.900
PSU |FSP Saga II 500|Rs.2000
Case |CM Elite 310|Rs.1500
Monitor |Samsung P2370MS|Rs.14000
Mouse and Keyboard |Logitech MK100|Rs.500
Total ||Rs.36000
The suggested monitor has a number of connectivity options and also has built in speakers so that you can connect it to your set top box directly. The MSI motherboard lacks USB 3/SATA 6Gbps, but has DVI-D, HDMI, VGA connectivity.
Another AMD Based option is :
Component | Make | Price Processor |AMD Athlon II X4|Rs.4500
Motherboard |Gigabyte GA-880GA-UD3H|Rs.5400
The rest are same. Thus gives total = Rs.34200.
Else you can opt for a normal 22" monitor and use a tv tuner card for watching tv.
thetechfreak
May 8, 2011 at 5:18 PM
Its really not worth spending almost half the money of budget on monitor only.
Btw, op doesnt need a 23 inch panel. He wrote 22 inch. So lets reccomend a monitor that leaves head room for other components.

No GPU? Sorry but I dont like the idea of spending money on a huge monitor and use no GPU.
M
May 8, 2011 at 6:30 PM
^ He wrote minium 22. Also he want the monitor to be connected with STB. I know, spending too much on a monitor is not good unless very necessary.
Also a GPU is not necessary for the op's normal uses.
Lets wait for the op to comment.
S
May 9, 2011 at 8:36 AM
Thanks guys for your recommendations. I have a few questions
1) What are other benefits of using samsung P2370MS over other monitor, except that it is 1" bigger screen.
2) Is there a equivalent cost effective monitor( direct connection to settop) in 22"
3) Is AMD Athlon II x4 640 performance adequate for my application w/o a graphics card.
3) Can you give names/ numbers of some assemblers in thane/mumbai region where I can get machine with above configuration. How much should I consider as charges for assembly
4) are the indicative prices including taxes and duties? Since I need a VAT invoice for the machine.
thetechfreak
May 9, 2011 at 10:51 AM
sabmayahai said:
1) What are other benefits of using samsung P2370MS over other monitor, except that it is 1" bigger screen.
Its got a couple extra couple ports, better screen. But I think its best to spend extra money on a Graphics Card
samayahai said:
2) Is there a equivalent cost effective monitor( direct connection to settop) in 22"
The Benq G2220 HD as I have posted is one of the best 22" monitors at that price.
samayahai said:
3) Is AMD Athlon II x4 640 performance adequate for my application w/o a graphics card.
Its always good to get a GPU when you use a PC for CAD. But for movies it should be, but I reccomend you to get GPU.
If you spend a little extra on the Intel config, its way better and a bit more future proof.
samayahai said:
3) Can you give names/ numbers of some assemblers in thane/mumbai region where I can get machine with above configuration. How much should I consider as charges for assembly
Go to Lamington Road, Mumbai. There will be loads of shops there. Considered Hardware heaven of India.
furious_gamer
May 9, 2011 at 10:57 AM
A: Home use; watching movies, occasional gaming and net surfing et al. I use Acad some times for CAD drafting.

Conflicting!!!!

You just forgot that settop thing. Just get a VFM 22" monitor, get a decent GPU like 5770 for 7.5k. CAD sure needs a GPU, dedicated. Onboard will screw things up in such scenario.

Take manju's config, change the monitor to "Benq G2220Hd @ 7300" and invest rest in Sapphire 5770 @ 7.5k
S
May 9, 2011 at 11:27 AM
Thanks to Techfreak , manu and Furious gamer for your inputs

I was just comparing the two monitors BenQ and Samsung. Barring the size only diff i could see that P2730 has built in TV tuner , remote and few other connectors i could not understand. The comparison is attached.

Does this mean in need a TV tuner card with BenQ monitor? or does the settop box eliminate need for TV tuner card?
S
May 9, 2011 at 11:37 AM
for academic interest, when is the tuner card required? when I am connecting the cable TV (non-DTH) W/o Set-top box ?

Also to which port is the PC connected and to which is the STB connected ?
furious_gamer
May 9, 2011 at 11:50 AM
for academic interest, when is the tuner card required? when I am connecting the cable TV (non-DTH) W/o Set-top box ?

Exactly.

Also to which port is the PC connected and to which is the STB connected ?

It will help you, i guess

Connecting Set Top Box to PC - AfterDawn: Forums

Set Top Box to PC Connection - Cable Forum
S
May 9, 2011 at 12:10 PM
I just realised that G2220HD and E2220HD are different monitors with feature differences (E2220 has HDMI port and Speakers which G2220HD lacks) . Is E2220HD available in india? if yes what is the price.
furious_gamer
May 9, 2011 at 12:18 PM
^^

Theitdepot - BenQ 21.5inch Widescreen Full HD LCD Monitor (E2220HD)

Street price will be bit cheaper.
M
manujohn #15
May 9, 2011 at 6:26 PM
Okey, here i edited the config.
Component | Make | Price Processor |Intel Core i5 2300|Rs.9000
Motherboard |MSI H61 E33 B3|Rs.3300
RAM |Corsair CMV4GX3M1A11333CL9 4GB DDR3 Single Stick|Rs.2200
HDD |Seagate 1TB 7200.12|Rs.2600
DVD Writer |LG 22X SATA DVD|Rs.900
PSU |FSP Saga II 500|Rs.2000
Case |CM Elite 310|Rs.1500
Monitor |BENQ G2220HD|Rs.7300
Graphics Card |MSI R5770 HAWK 1GB/SAPPHIRE HD5770 1GB|Rs.7300
Mouse and Keyboard |Logitech MK100|Rs.500
Total ||Rs.36600
furious_gamer
May 9, 2011 at 6:27 PM
Okey, here i edited the config.
Component | Make | Price Processor |Intel Core i5 2300|Rs.9000
Motherboard |MSI H61 E33 B3|Rs.3300
RAM |Corsair CMV4GX3M1A11333CL9 4GB DDR3 Single Stick|Rs.2200
HDD |Seagate 1TB 7200.12|Rs.2600
DVD Writer |LG 22X SATA DVD|Rs.900
PSU |FSP Saga II 500|Rs.2000
Case |CM Elite 310|Rs.1500
Monitor |BENQ G2220HD|Rs.73000
Graphics Card |MSI R5770 HAWK 1GB/SAPPHIRE HD5770 1GB|Rs.7300
Mouse and Keyboard |Logitech MK100|Rs.500
Total ||Rs.36600

73000 for a monitor....... :shock: :rofl:
S
May 9, 2011 at 7:54 PM
what is the kind of margins/charges that assemblers keep? I am not getting quotes in the vicinity of those figures. they are atleast 5-7K higher.
S
May 12, 2011 at 5:43 PM
Intel Core i5 2400
Intel DH61WW
Benq E2220HD
G.Skill F3-10666CL9S-4 GBNQ
Seagate ITB 7200.12
LG 22X SATA DVD
Logitech KB-200
Logitech 3 Button Scroll
FSP Saga II 500W + CM Elite 310
1 GB HD5700 series graphics card

I am buying this config at 37.5 K.

Is the above separate graphics card useful with with I5-2400 which has onboard graphics ?
Cilus
Cilus #19
May 12, 2011 at 5:47 PM
When you add a dedicated Graphics card, the onboard graphics of the Sandy bridge processors gets disabled with H61 chipset based mobos.