Right PSU & RAM for a Core i7

Hii,
Can someone suggest me a suitable and less expensive PSU and 8GB RAM (4x2) for this PC Config ?

Core i7 2600K,
GIGABYTE GA-Z68MA-D2H-B3,
500GB HDD, 9600GT

Thanks in advance!

FSP Saga II 500W or Corsair CX430v2 @ ~2.3k

Corsair Vengeance 2x4GB 1600Mhz @ ~3.6k or G.Skill Ripjaws F3-12800CL9S-2x4GBRL @ 3.6k - they are most suitable components I can think for the config you have ;-)

+1 for tg's suggestion.

+1 topgear.i think better to go with corsair one if he is not using any big after market cooler.
@Raziel
which cooler you are using?

But 1st of all post your full config and Budget. May be your config require more power than this.
Though topgear has suggested the cheapest and very good combo, but still to get better suggestion post your full config and budget.

saswat23 said:
But 1st of all post your full config and Budget. May be your config require more power than this.
Though topgear has suggested the cheapest and very good combo, but still to get better suggestion post your full config and budget.

It's more or less given.

Raziel said:
Hii,
Can someone suggest me a suitable and less expensive PSU and 8GB RAM (4x2) for this PC Config ?

Core i7 2600K,
GIGABYTE GA-Z68MA-D2H-B3,
500GB HDD, 9600GT

Thanks in advance!

@Topgear: Thank you for the nice selection!
Actually I was upgrading from an old Pentium D 820 processor and mobo to the new i7 2600K for graphics intensive works, and I saw I had to change almost everything including the PSU. I'm in a tight budget too.

@sukesh1090: I'm having the intel stock cooler..I'm not sure if it's enough if I wanna overclock up to a 4.5Ghz

Processor: Core i7 2600K,
Motherboard: GIGABYTE GA-Z68MA-D2H-B3,
Hitachi 500GB SATA
XFX 9600GT
Sony DVD Writer
22" Samsung TFT

I have a Mercury Elite 650 PRO UPS. Will that be enough for this PC ? I need just 5 mins backup.

Thanks everyone!

@topgear: Thank you for the nice selection!

@sukesh1090: I'm planning to use the intel stock cooler came with the i7. Will that be enough if I wanna overclock up to a 4.5Ghz ?

Well, actually I was upgrading from my old Pentium D 820 to the new i7 2600k for graphics intensive works. I didn't know I had to change the PSU too.

Config is pretty much the same. A normal PSU will be enough for my usage.

Core i7 2600K,
GIGABYTE GA-Z68MA-D2H-B3,
500GB HDD
XFX 9600GT
Sony DVD Writer
22" Samsung TFT

Also I have a Mercury Elite 650 Pro UPS. Will this be enough for this PC ? I need just 5 mins backup.

Thanks everyone!

^^ For graphics intensive works you need a good and powerful gpu as well and not only a powerful cpu.

Mention the kind of apps you'll be running.

Thanks Vickybat.
I will be using 3ds Max & Photoshop mostly. Yea I'd like to have a gpu as well, but a less expensive Quadro FX is what I'm looking for.

i doubt that you will be able to overclock with the stock cooler.people facing difficulty in running 2600k with stock cooler even in normal stock speed.you can find these threads in hardware Q&A or cpu and mobo section.

The stock cooler provided with Intel Sandybridge CPUs are actually crap. In Indian condition they are even not enough to run a 2600K in stock speed. And for 4.5 GHz, you definitely need a good aftermarket cooler. Opt for Cooler Master N620, priced @ 2.5 to reach 4 GHz or above.

CM Hyper 212 Plus is also good.

^^ Its not enough for 4.5 GHz overclock. In fact Corsair V series liquid cooling solutions are better for over 4 GHz.

Thanks Cilus for the suggestion. It's true that the intel cooler is not enough for overclocking needs. I will get a Coolermaster!

Now I'm only worried about the Mercury Elite 650 Pro UPS. Will it be enough for the PC ?

Thanks to all for the great help!

Cilus said:
^^ Its not enough for 4.5 GHz overclock. In fact Corsair V series liquid cooling solutions are better for over 4 GHz.

Air cooling solutions are safe to use when it comes to cpu coolers ;-)

Raziel said:
Thanks Cilus for the suggestion. It's true that the intel cooler is not enough for overclocking needs. I will get a Coolermaster!

Now I'm only worried about the Mercury Elite 650 Pro UPS. Will it be enough for the PC ?

Thanks to all for the great help!

That UPS will be enough for now.

Get CM V6GT around ~3.8k - it's an awesome cooler IMO ;-)

Cilus said:
^^ Its not enough for 4.5 GHz overclock. In fact Corsair V series liquid cooling solutions are better for over 4 GHz.

Correct, but liquid cooling kit can ruin whole motherboard and gfx card (in worst case ram, hdd etc.) in case of accident.

Saw one of these type of issues at hardforum.

I think you guys are getting me wrong. What I was trying to say that for 4 GHz+ overclocking higher middle end coolers are required...not any specific cooler type. The Water cooler suggestion is just an example...CM V6GT is sufficient for 4 GHz+

V6GT is good, but comparatively overpriced @ 3.8K.

Talking of stock coolers, this just in
Sandy Bridge-E CPUs Too Hot For Intel? - Slashdot

^^ nice find there ;-)

It's a good start but nothing new as AMD has shipped their BE cpus without coolers a long time ago - I think Intel wants to start their cooling business as they will release their own branded coolers separately for SB-E.

topgear said:
^^ nice find there

It's a good start but nothing new as AMD has shipped their BE cpus without coolers a long time ago - I think Intel wants to start their cooling business as they will release their own branded coolers separately for SB-E.

Its sad but very true.

as BD is being launched,Intel thinking of keeping their profit by selling coolers. :wink:

:LOL:

But yeah, the server market is more lucrative, so if BD strikes a chord there, then...

sukesh1090 said:
as BD is being launched,Intel thinking of keeping their profit by selling coolers.

^^

The cpu cooler market is now at a very decent stage ( thanks to the OCers and power users ) - so the big cpu manufacturer decided make some fat profit out of this and if they don't monopolize and play by the rules there will be some great competition in cpu cooler market for sure ;-)

Hi guys, thanks for all the suggestions. I bought the Corsair Cx500W at the end.
For the RAM, I'm going to get the 8GB GSkill Ripjaws X 1600Mhz. I just ordered it in a shop here. Thanks for all the great help!

Raziel said:
For the RAM, I'm going to get the 8GB GSkill Ripjaws X 1600Mhz. I just ordered it in a shop here.

Let us know at what price you are getting 8GB GSkill Ripjaws X 1600Mhz RAM modules.