DIGIT-ARC read-only archive · snapshot: July 23, 2026

Sennheiser CX 275s In-Ear Headphone

13 posts · originally from https://geek.digit.in/community/threads/sennheiser-cx-275s-in-ear-headphone.208264/

avichandana20000
avichandana20000 Original post #1
Apr 6, 2020 at 11:21 AM
I have a Sennheiser CX 275s In-Ear Headphone with mic facility. The mic is working fine while used in phone but when trying in PC it is not working.
I have inserted it in the rear pink port as line-in . Now , in the pic attached, which one do i need to choose as a default microphone? There are two Mic in Ready mode. The Playback output is my 2.1 speaker.


Audio_1.JPG
W
Apr 6, 2020 at 11:45 AM
Post full details of system like mobo model,windows version etc.
avichandana20000
Apr 8, 2020 at 5:54 PM
all are given in signature..win10 Ent.
W
Apr 8, 2020 at 6:19 PM
Have you checked with selecting all available options one-by-one? Also I am not sure these in-ear earphones with mic work the same way in mobile & pc. @SaiyanGoku @omega44-xt
Zangetsu
Apr 8, 2020 at 6:40 PM
For computers with separate microphone and earphone jacks, an external microphone adapter should be used to convert the 3.5mm TRRS plug to a three-band 3.5mm microphone input connector (with three sections separated by two insulators).

*www.techwalla.com/articles/how-to-use-earphones-as-a-microphone

PC has separate port for audio in/out.

If you plug-in to audio-in then it will record all sounds from microphone.
avichandana20000
Apr 8, 2020 at 6:54 PM
tried techwalla but headphone mic is not active...its taking from default Mic.. Thanks for the info.
omega44-xt
Apr 9, 2020 at 3:00 AM
I own an Alienware laptop & my office has a Dell PC, in both, when I plug in a headphone/speaker, I get an option to select what device it was. If I select headset with mic, the PC switches to my headset's mic.

Connect your headphone to a 3.5mm combo jack (check mobo manual to find which is what) & try to see if available devices change. I hope you have already tried using the different available "ready" mics to see if you are getting the desired mic.
avichandana20000
Apr 9, 2020 at 11:18 AM
I own an Alienware laptop & my office has a Dell PC, in both, when I plug in a headphone/speaker, I get an option to select what device it was. If I select headset with mic, the PC switches to my headset's mic.

Connect your headphone to a 3.5mm combo jack (check mobo manual to find which is what) & try to see if available devices change. I hope you have already tried using the different available "ready" mics to see if you are getting the desired mic.

My Monitor is Dell with built in webcam and microphone(SP2309W) and this mic is the default one. taken by the system. I have tried the Line-in (pink) port at the rear of mobo with the headphone jack and set it as default nut still the Dell mic is capturing the sound and not the Headphone mic.
W
Apr 9, 2020 at 11:47 AM
My Monitor is Dell with built in webcam and microphone(SP2309W) and this mic is the default one. taken by the system.
There's your problem, windows takes only 1 audio input at a time if it is non-usb type.
W
Apr 9, 2020 at 3:31 PM
Even when it is disabled.
How,I am not sure software disabling will work. In my opinion only sure shot way is to disconnect the monitor & check with another monitor with no inbuilt mic or try remote desktop from another pc to control while you connect earphone to pc.
topgear
topgear #12
Apr 13, 2020 at 8:30 AM
I have a Sennheiser CX 275s In-Ear Headphone with mic facility. The mic is working fine while used in phone but when trying in PC it is not working.
I have inserted it in the rear pink port as line-in . Now , in the pic attached, which one do i need to choose as a default microphone? There are two Mic in Ready mode. The Playback output is my 2.1 speaker.


View attachment 18940

What you need is 3.5mm Mic Audio Y Splitter Cable .. connect the CX275s with it and then connect only the mic end of the Y cable with the PCs mic in port ( pink ) and disable the other mic ( the one of the monitor's )
*www.amazon.in/RiaTech-Male-Female-3-5mm-Headphone/dp/B077V12H3Q/
avichandana20000
Apr 13, 2020 at 2:57 PM
What you need is 3.5mm Mic Audio Y Splitter Cable .. connect the CX275s with it and then connect only the mic end of the Y cable with the PCs mic in port ( pink ) and disable the other mic ( the one of the monitor's )
*www.amazon.in/RiaTech-Male-Female-3-5mm-Headphone/dp/B077V12H3Q/
Now this is a legitimate solution. thanks