A
How can i share my files from laptop to pc using an ethernet cable? Both running windows 7
Share files via ethernet
buy a cross-over ethernet cable or make it yourself - it's very simple 
*www.makeitsimple.com/modules.php?name=Content&pa=showpage&pid=8&page=1
*www.makeitsimple.com/modules.php?name=Content&pa=showpage&pid=8&page=1
^^Topgear thanx for the info
A
1. You can also go for usb-usb cable- *www.hardwaresecrets.com/article/Connecting-Two-PCs-Using-a-USB-USB-Cable/248 but I don't really think the speed would be like ethernet one.
2. use switch.
2. use switch.
didn't knew it...thanx
Connet both of the devices with ethernet cable using a modem !
after that open your browser and then put this address 192.168.1.1
and then open sharing options and forward the setup .
Its done
Simple !
after that open your browser and then put this address 192.168.1.1
and then open sharing options and forward the setup .
Its done
Simple !
Crosscable is easy to use and speed go around 11 MBPS but u have to still put a fake ip on both the machines to transfer data.
192.168.1.1 sort of
192.168.1.1 sort of
but which will fastest in speed Ethernet method or USB bridge???
Ethernet of course
Ethernet is much fast than USB Bridge !
ANYTIME !!!
ANYTIME !!!
Ok..but in the above article of USB bridge its given USB2.0 is faster than ethernnet....
A
Its given in the article but I think Ethernet will always be faster as lets suppose the cable may have the capacity to transfer at that speed but the devices will definitely throttle the speed (like having corei7980x in a computer with 512mb 80gb 5400rmp config.).(This is my theory as I have never tested the cable for it.)Ok..but in the above article of USB bridge its given USB2.0 is faster than ethernnet....
you're welcome bro
Ok..but in the above article of USB bridge its given USB2.0 is faster than ethernnet....
USB 2.0 is faster than 100mbps network but if Op's laptop and desktop comp both have 1 gbps lan interface and OP is is going to use cat 7 cable then it will outperform usb 2.0
- for short length say 4-6 feet usb cable can be used butr for longer length like 50-100 feet ethernet cable should be used.
If you only want to share files, I don't think you'll need to assign IP address to the machine. Just make the workgroup name same and the machines will show up in network neighbourhood. Set the network type as home or else nothing will show up
^^ sharing files without ip-address is not possible AFAIK and if he is not assigning any ip-address to the network card installed he will need to get it from some DHCP server and the DHCP server should take care of the ip-address automatically
Maybe the thing is done automatically in the background, but when I had tried networking 2 PCs, I only made the workgroup name same and they were visible in network neighbourhood. I could browse the shared files and folders from there. I never manually assigned any IP address.
Of course, for anything else one will need to assign or know the IP address of the PC coz otherwise it won't be possible to locate the networked PC from any other machine manually
Of course, for anything else one will need to assign or know the IP address of the PC coz otherwise it won't be possible to locate the networked PC from any other machine manually
Maybe u did it through the wizard run on both the PC's
how much is the cost of Cross Cable?
Apprx Rs. 100 or u can get a Hand made one Cable Cat6 Dlink@Rs 15-20 Per Meter, RJ45 Dlink @ Rs 10-15 per PC
so what is the basic requirement of this usb cable to attain the speed of 5times more than the Ethernet cable???
Simple the Bridge Chip Has to be USB2.0